北京典型道路交通环境机动车黑碳排放与浓度特征研究

本研究对2009年北京市典型道路(北四环中路西段)进行实际交通流监测和调研,分析了总车流量、车型构成和平均速度的日变化规律.应用北京机动车排放因子模型(EMBEV模型)和颗粒物黑碳排放的研究数据,计算该路段的黑碳平均排放因子和排放强度.根据同期观测的气象数据,应用AERMOD模型对道路黑碳排放进行了扩散模拟,并根据城市背景站点和道路边站点的监测数据对模拟结果进行了验证.研究表明,该路段黑碳平均排放因子与重型柴油车在总车流中所占比例呈现出极强的相关性,由于北京市实行货车区域限行制度,日间时段总车流的平均黑碳排放因子为(9.3±1.2)mg·km-1·veh-1,而夜间时段上升至(29.5±11.1)mg·km-1·veh-1.全天时均黑碳排放强度为17.9~115.3g·km-1·h-1,其中早(7:00—9:00)晚(17:00—19:00)高峰时段的黑碳排放强度分别为(106.1±13.0)g·km-1·h-1和(102.6±6.2)g·km-1·h-1.基于同期监测数据验证,AERMOD模型的模拟效果较好.模拟时段的道路黑碳排放对道路边监测点的平均浓度贡献为(2.8±3.5)μg·m-3.由于局地气象条件差异,日间和夜间的机动车排放对道路边黑碳的模拟浓度存在显著差异.日间时段,小型客车排放对道路边站点的黑碳浓度贡献最高,达(1.07±1.57)μg·m-3;其次为公交车,达(0.58±0.85)μg·m-3.夜间时段货车比例明显上升,其黑碳排放占主导地位,贡献浓度(2.44±2.31)μg·m-3.     

火炬系统安全隐患分析与整改措施

对近年火炬系统安全事故作了分析,结合石化企业火炬系统运行的现状,提出完善火炬管网、分液罐、气柜联锁和自动点火及长明灯等安全设施的建议。     

废旧线路板回收的污染防治技术综述

废旧线路板回收不仅能够解决电子废弃物迅速增长带来的环境污染问题,而且可以实现资源再生利用,是中国当前鼓励发展的行业。线路板回收过程也将不可避免的带来一定环境污染问题。中国企业现阶段常用的线路板回收工艺主要包括机械物理法、湿法冶金、火法冶金、热解法等。废旧线路板的回收工艺不同,污染物产生特点也不同,企业应根据线路板回收工艺有针对性的选择污染防治措施。线路板回收过程中产生的废渣再利用应成为今后研究的重点。     

畜禽养殖业氨氮总量控制减排技术评估研究

畜禽养殖业是"十二五"期间氨氮总量减排的重点,其清洁生产与末端治理技术种类繁多,不同技术在不同应用条件下减排效果差别显著。深入分析了国内外畜禽养殖业发展与污染现状,系统归纳了国内畜禽养殖业氨氮总量减排技术区域特征,综合使用层次-灰色综合评判法、费用-效益法、表单法等对氨氮总量减排技术进行了综合性的评价研究,构建了基于面向服务架构(SOA)的氨氮减排技术评估咨询平台。结果表明,氨氮总量减排技术评估方法与平台可大幅度提高技术评价的效率和精确度,可广泛应用于企业和管理部门氨氮减排的工程技术与环境管理工作。     

滇池流域土壤活性腐殖质及其主要组分的紫外-可见与三维荧光光学特性

利用紫外-可见光谱和三维荧光光谱技术,结合土壤腐殖质及腐殖质组分(胡敏酸、富里酸)中的有机碳含量,研究了滇池流域土壤活性腐殖质及其组分胡敏酸和富里酸的光谱特征.结果表明,滇池流域土壤活性腐殖质中富里酸含量高于胡敏酸,流域范围内土壤活性腐殖质及其组分含量分布不均匀,活性腐殖质、胡敏酸和富里酸含量的变异系数分别达37.7%、36.4%、40.9%.土壤活性腐殖质及其组分胡敏酸和富里酸的碳含量均表现为菜地荒地草地湿地.光谱特征结果表明,滇池流域土壤活性腐殖质主要由自生源物质和经一定程度降解后的外源物质共同组成.此外,自生源性与光化学及生物活性具有正相关关系.因此,具有弱自生源性的滇池流域土壤活性腐殖质所具有的光化学和生物活性较弱.     

Role of cosubstrate and bioaccessibility played in the enhanced anaerobic biodegradation of organochlorine pesticides (OCPs) in a paddy soil by nitrate and methyl-β-cyclodextrin amendments

The present study was conducted to investigate the anaerobic biodegradation potential of biostimulation by nitrate (KNO₃) and methyl-β-cyclodextrin (MCD) addition on an aged organochlorine pesticide (OCP)-contaminated paddy soil. After 180 days of incubation, total OCP biodegradation was highest in soil receiving the addition of nitrate and MCD simultaneously and then followed by nitrate addition, MCD addition, and control. The highest biodegradation of chlordanes, hexachlorocyclohexanes, endosulfans, and total OCPs was 74.3, 63.5, 51.2, and 65.1 %, respectively. Meanwhile, MCD addition significantly increased OCP bioaccessibility (p?<?0.05) evaluated by Tenax TA extraction and a three-compartment model method. Moreover, the addition of nitrate and MCD also obtained the highest values of soil microbial activities, including soil microbial biomass carbon and nitrogen, ATP production, denitrifying bacteria count, and nitrate reductase activity. Such similar trend between OCP biodegradation and soil-denitrifying activities suggests a close relationship between OCP biodegradation and N cycling and the indirect/direct involvement of soil microorganisms, especially denitrifying microorganisms in the anaerobic biodegradation of OCPs.     

Effects of leachate accumulation on landfill stability in humid regions of China

Leachate levels are important to landfill stability and safety. High leachate or water levels often lead to landfill instability, which can cause accidents. Here a case study of a landfill located in a humid region of southern China is presented. Leachate distribution and quality were systematically analyzed, and the effect of leachate level on waste-mass stability was assessed. Boreholes were drilled in the field, samples were analyzed in the laboratory, and a simulation was performed. In addition, the safety and stability of the landfill was evaluated. The leachate level in the landfill was 9–19 m, which was higher than the top of the dam crest (8–20 m). Leachate accounted for more than 1/4 of the total landfill storage capacity. The contaminant concentration of the leachate samples collected directly from the waste body was very high, with large variation among the samples. The mean concentrations of NH₃–N, BOD, and COD from the waste body were 5404, 14,136, and 22,691 mg/L, nearly 2.7, 2.4, and 1.8 times the mean concentrations in the leachate pond, respectively. Three series of shear strength parameters were used in a slope stability analysis, and a limit equilibrium method was used to calculate the factor of safety (Fs). The analysis showed that Fs could be affected by potential anisotropy in the shear strength of the waste. The minimum values of Fs corresponding to series I were 1.84 and 1.17 for units ? and II, respectively. The Fs value of unit II was significantly lower than the safe design value (1.25). In addition, Fs decreased with increase in the normalized height of the leachate level, h/H, where h is the height of the leachate mound and H is the maximum thickness of the landfill. If the h/H values of units I and II are kept below 50% and 40%, respectively, a safe design value of 1.25 for Fs can be guaranteed. Therefore, some measures to prevent risk should be considered.     

祁连山北坡自然恢复杨桦林地植物功能型组成及其影响因素

依据生活型(乔木、藤本、灌木、半灌木、多年生禾草、多年生杂类草和一二年生草本)和水分生态型(旱生、旱中生、中生和湿生)将祁连山北坡次生杨桦林28个调查样地中的81个物种划分为18种植物功能型(Plant functiontypes,PFTs),并通过典范对应分析(CCA)方法研究植物功能型与环境因子间的关系.结果表明:自然恢复杨桦林地植物功能型主要集中在中生多年生杂类草(PFTs16)、湿生多年生杂类草(PFTs23)、旱中生多年生杂类草(PFTs9)和中生灌木(PFTs18)4个植物功能型上;乔、灌、草三层冠层特征和中生植物的大量出现,反映了群落植物生活型趋于复杂化和结构化,生态型逐渐向中生化方向演替的特点;土壤容重、有机碳和全氮含量主要影响植物的生活型分异特征,土壤含水量和林冠郁闭度是植物的水分生态型分异的主要环境因子,而坡位、坡度控制着群落植物总体分布格局的形成.图1表3参31     

Optimization of hydrogen distribution systems with pressure constraints

Hydrogenation units are often operated at high pressure, requiring the use of compressors which are one of the most expensive chemical processing equipment. Optimizing a hydrogen network should therefore take into consideration not only purity and flowrate constraints but also pressure requirements. In this paper, based on the hydrogen surplus diagram approach, the average pressure profiles of hydrogen sources and sinks are proposed through the introduction of a system’s minimum pressure drop Δp. Combined with the traditional purity profiles, whether a source can meet a sink either for hydrogen concentration or for pressure requirements can be determined intuitively. In cases where the pressure of a source is not sufficient for a sink, installing a hydrogen compressor or using another source with higher purity and pressure could be potential solutions. A cost equation is established to determine which of the two solutions is economically more viable. For different matching situations between sources and sinks, strategies for optimum placement of compression equipment within a given hydrogen network are proposed. A case study is used to illustrate the application and effectiveness of the proposed method.