Effect of inoculation methods on the composting efficiency of municipal solid wastes

Four types of inoculation methods were studied during the composting of municipal solid wastes and dry grass (MSWG). The methods included a control group as well as initial-stage, two-stage, and multi-stage inoculations. Fulvic acids were extracted from the composting materials and characterized by spectroscopic techniques. The results showed that inoculation of microbes in MSWG enhanced the biodegradation of aliphatics, proteins, and polysaccharides. The inoculation also increased the molecular weight, humic- and fulvic-like compound content, as well as humification degree of the composting products. The inoculation of microbes in MSWG significantly improved composting process and efficiency. The improvement efficiency was in the order of initial-stage < two-stage < multi-stage inoculations. Inoculation of microbes based on composting organic matter composition and temperature enhanced composting efficiency.     

Spatial distribution and loading amounts of particle sorbed and dissolved perfluorinated compounds in the basin of Tokyo Bay

In this study, we analyzed over 30 types of PFCs, including precursors in both the dissolved phase and particle solid phase, in 50 samples of river water collected from throughout the Tokyo Bay basin. PFCs were detected in suspended solids (SSs) at levels ranging from <0.003-4.4 ng L(-1) (0.11-2470 ng g(-1) dry weight). The concentrations of PFCs in the SS were one to two order(s) of magnitude lower than those of PFCs in the dissolved phase. Relatively high levels of PFCs (total of 35 PFCs) in SS were observed in urbanized areas. The concentration of PFCAs, including PFOA and PFNA, were significantly correlated with the geographic index as artificial area (R(2) of the linear regression curve in a double logarithmic plot: 0.09-0.55). Conversely, PFOS and FOSA were significantly correlated with the arterial traffic area (R(2) in a double logarithmic plot: 0.29-0.55). Those spatial trends were similar to the trends in dissolved PFCs. We estimated the loading amount of PFCs into Tokyo Bay from six main rivers and found that more than 90% of the total PFCs reached Tokyo Bay in the dissolved phase. However, 40.0-83.5% of the long chain PFCAs (C12-C15), were transported as particle sorbed PFCs. Rain runoff events might increase the loading amount of PFCs in SS. Overall, the results presented herein indicate that greater attention should be given to PFCs, especially for longer chain PFCs in SS in addition to dissolved PFCs.     

浅议中国环境影响评价的公众参与制度

公众参与制度在环境影响评价中起着重要作用,环境影响评价制度中公众参与制度的产生和发展可以总结为三个阶段.通过环境信息公开、扩大参与范围、加强监督管理、细化程序、提高环境意识等方面提出完善环境影响评价中的公众参与制度的一些建议.     

淮海经济区核心区污染排放对重点区域城市PM2.5贡献研究

基于WRF-CMAQ空气质量模型，采用开关污染源排放的敏感性试验方法，定量分析了淮海经济区核心区污染排放对京津冀区域、"2+26 "大气污染传输通道城市、汾渭平原地区和长三角区域PM_2.5的贡献.结果表明，对京津冀区域，污染贡献比例最大值出现在10月份，同时对不同城市的贡献值在10%以内变化；对" 2+26"大气传输通道城市，影响的时空差异变化明显，其中对聊城市、菏泽市和济南市的贡献值均超过了10%；对汾渭平原地区的贡献总体较弱，最大贡献值低于5%；对长三角区域，贡献值在不同城市间的时空差异变化明显.考虑到淮海经济区地处京津冀和长三角过渡地带，且对京津冀和长三角区域PM_2.5影响较大，建议尽快将淮海经济区核心地区纳入国家大气污染重点控制区.     

成都市工业挥发性有机物排源成分谱

选取成都市汽车制造和石油化工等典型工业行业,通过瓶采样和SUMMA罐采样及GC-MS分析方法,研究了不同生产工艺环节的挥发性有机物(VOCs)排放特征.结果表明,汽车制造各工艺环节均有各自的优势组分,其中喷漆排放以烷烃(32%)和芳香烃(35%)为主.家具制造排放特征与使用原辅料高度相关,以芳香烃(50%)和OVOCs(38%)为主.石油化工各装置区VOCs浓度范围为49～1 387μg·m~(-3),不同装置区存在较大差异,主要是由于炼油区主要产品为C_5～C_9的汽油和苯系物等,化工区则较多使用了溶剂同时生成烯烃类产品.电子制造均以OVOCs为主,占VOCs总排放的50%以上.制鞋行业排放VOCs主要由烷烃和OVOCs贡献,平均占比分别为52%和36%,与所用溶剂组分高度相关.汽车制造VOCs排放组分差异较大,主要以正十二烷和2-丁酮等为主.家具制造排放组分主要为苯乙烯、乙酸乙酯和间/对-二甲苯等,为涂料和稀释剂的典型组分.石油化工各装置区排放组分有差异,炼油区以苯乙烯等为主,化工区主要为1,3-丁二烯等,仓储区主要为C_3～C_5烷烃等,废水处理则主要为C_6～C_8烷烃等.电子制造主要组分均为乙醇和丙酮等醛酮组分.制鞋企业排放组分以C_5和C_6等烷烃为主.通过臭氧生成潜势计算比较,汽车制造和石油化工行业对臭氧生成潜势贡献较大的VOCs排放组分以烯烃和芳香烃为主,具有较高的污染源反应活性.研究表明各工业行业OVOCs排放比例(17%～96%)和对臭氧生成潜势贡献均较为显著,因此在进行VOCs排放控制时,除重点管控芳香烃和烯烃外,亦应提高对OVOCs组分的关注.     

Robust magnetic laccase-mimicking nanozyme for oxidizing o-phenylenediamine and removing phenolic pollutants

In this study, we report a novel magnetic biomimetic nanozyme(Fe_3O_4@Cu/GMP(guanosine5′-monophosphate)) with high laccase-like activity, which could oxidize toxic ophenylenediamine(OPD) and remove phenolic compounds.The magnetic laccase-like nanozyme was readily obtained via complexed Cu~(2+)and GMP that grew on the surface of magnetic Fe_3O_4 nanoparticles.The prepared Fe_3O_4@Cu/GMP catalyst could be magnetically recycled for at least five cycles while still retaining above 70% activity.As a laccase mimic,Fe_3O_4@Cu/GMP had more activity and robust stability than natural laccase for the oxidization of OPD.Fe_3O_4@Cu/GMP retained about 90% residual activity at 90℃ and showed little change at pH 3–9, and the nanozyme kept its excellent activity after long-term storage.Meanwhile, Fe_3O_4@Cu/GMP had better activity for removing phenolic compounds, and the removal of naphthol was more than 95%.Consequently, the proposed Fe_3O_4@Cu/GMP nanozyme shows potential for use as a robust catalyst for applications in environmental remediation.     

DOC+CDPF对国III重型柴油货车实际道路排放的影响

利用便携式车载排放测试系统（PEMS）对2辆加装氧化催化转化器（DOC）和催化型柴油颗粒捕集器（CDPF）与否的国III重型柴油货车进行实际道路排放测试.结果表明,2辆改造重型柴油车的CO、THC、固态颗粒物粒数（SPN）和黑碳（BC）实际道路排放因子分别为（1.31±0.37）g/（kW×h）、（0.20±0.03） g/（kW×h）、（7.13×10¹⁰±5.27×10¹⁰）个/（kW×h）和（0.69±0.06）mg/（kW×h）,相对于原始排放（拆除DOC+CDPF）分别降低52.48%、55.69%、99.91%和99.22%.从低速、中速到高速,CO和THC减排比例呈现上升趋势,然而运行工况对SPN和BC减排比例则无显著影响.加装DOC+CDPF会导致NO₂在NO_x中的占比升高,且从低速、中速到高速涨幅依次增大,但对NO_x无明显减排效益,其排放因子为9.53~9.83g/（kW×h）,远高于实验室排放限值.     

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO₂ hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO₂ catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N₂ physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed...     

南京八卦洲农用地表层土壤重金属分布特征及风险评价

为查明南京八卦洲土壤重金属污染物类型及其影响范围,于2017年12月在洲内采集了471个表层土壤样品,测定了pH及As、Cd、Cr、Cu、Hg、Ni、Pb、Zn等8种重金属元素浓度,采用单因子指数法、内梅罗综合指数法和潜在生态危害指数法进行了污染风险评价。研究结果表明:As、Cd、Cr、Cu、Hg、Ni、Pb和Zn平均浓度分别为10.66、0.32、86.74、43.25、0.10、40.34、33.50和108.33 mg·kg-1,除As、Hg元素外,其余6种元素均超过南京市背景值,出现大范围的富集;Cd元素为研究区主要污染物,绝大部分为Ⅱ级轻微污染,均分布于八卦洲服务区附近的中、酸性土覆盖区,需做好安全利用措施。从全区来看研究区大部分农用地土壤处于安全生产级别,仅有少部分区域处于Ⅱ级和Ⅲ级风险水平,总体上潜在生态危害较低。     

推进养殖污染防治,实现产业优化与环境保护双赢——对《水污染防治行动计划》的解读

针对《水污染防治行动计划》提出的畜禽养殖污染治理思路和措施,梳理了我国现阶段畜禽养殖污染防治中存在的问题,对《水污染防治行动计划》中提出的"调布局、建设施、促利用"三大举措进行了分析和解读,提出了落实《水污染防治行动计划》的几项重点工作,为地方推进畜禽养殖污染防治工作提供参考。