Mechanistic insight into the biofilm formation and process performance of a passive aeration ditch (PAD) for decentralized wastewater treatment

• A Passive Aeration Ditch was developed to treat decentralized wastewater. • A model was developed to describe the process performance. • A high C/N ratio facilitates microbial growth but nitrification deteriorates. • A high salinity decreases both organic and nitrogen contaminants removal. Decentralized wastewater containing elevated salinity is an emerging threat to the local environment and sanitation in remote coastal communities. Regarding the cost and treatment efficiencies, we propose a passive aeration ditch (PAD) using non-woven polyester fabric as a feasible bubbleless aerator and biofilm carrier for wastewater treatment. Consideration has been first given to PAD’s efficacy in treating saline decentralized wastewater, and then to the impact of chemical oxygen demand-to-nitrogen (C/N) ratio and salinity on biofilm formation. A multispecies model incorporating the salinity effect has been developed to depict the system performance and predict the microbial community. Results showed that the PAD system had great capacity for pollutants removal. The biofilm thickness increased at a higher C/N ratio because of the boost of aerobic heterotrophs and denitrifying bacteria, which consequently improved the COD and total nitrogen removal. However, this led to the deterioration of ammonia removal. Moreover, while a higher salinity benefited the biofilm growth, the contaminant removal efficiencies decreased because the salinity inhibited the activity of aerobic heterotrophs and reduced the abundance of nitrifying bacteria inside the biofilm. Based on the model simulation, feed water with salinity below 2% and C/N ratio in a range of 1 to 3 forms a biofilm that can reach relatively high organic matter and ammonia removal. These findings not only show the feasibility of PAD in treatment of saline decentralized wastewater, but also offer a systematic strategy to predict and optimize the process performance.     

河流水质监测控制断面设置探讨

对河流水质监测控制断面设置的基本理论和方法进行了探讨.根据河流的控制断面应设在排放口的下游,污染物与河水能较充分混合处的原则,提出了河流水质监测控制断面的计算公式:X=0.313μB2/Ey,以及其他有关河流水质监测断面设置中应注意的问题.     

甲醛对原癌基因c-myc、MDM2及抑癌基因p53的影响

为研究吸入性甲醛的毒性能否进入动物骨髓组织,引起骨髓组织基因表达发生改变,选择小鼠某些原癌基因和抑癌基因为研究对象,以SPF级balb/c雄性小鼠为材料,采用动态吸入方式染毒2周(5+2模式),染毒浓度分别为0, 0.5, 3.0mg/m3,用半定量RT-PCR方法检测不同浓度甲醛对小鼠染毒后骨髓组织细胞中c-myc、MDM2和p53基因表达的变化.结果表明,在不同浓度的甲醛暴露条件下,与空白对照组相比,小鼠骨髓组织中的c-myc基因,MDM2基因和p53基因表达均发生改变,在3.0mg/m3浓度组与空白对照组存在显著差异(P<0.05), c-myc基因,MDM2基因呈现表达上调,p53基因则呈现表达下调.吸入性甲醛的毒性能进入动物骨髓组织,并能引起骨髓组织基因表达发生改变.     

沈阳市郊区环境空气中醛酮类化合物的污染特征与来源分析

为探究沈阳市郊区环境空气中醛酮类化合物的污染特征,于2017年8月24日—9月2日采用2,4-二硝基苯肼固相吸附/高效液相色谱方法对沈阳市郊区醛酮类化合物进行观测分析,利用美国环境保护局推荐的人体健康风险评价方法对部分有毒有害醛酮类化合物的人体健康风险进行了评价,并利用比值法对醛酮类化合物的来源进行了初步分析.结果表明:醛酮类化合物质量浓度日均值范围为23.16～38.38μg/m³;质量浓度最高的4种醛酮类化合物依次是丙酮、甲醛、正丁醛和乙醛,其质量浓度日均值的平均值分别为8.71、5.90、5.48和2.95μg/m³.对·OH消耗速率(L_OH)贡献较大的醛酮类化合物物种是正丁醛、甲醛和乙醛,臭氧生成潜势贡献(OFP)较大的醛酮类化合物物种是甲醛、正丁醛和乙醛,在研究区影响醛酮类化合物光化学反应活性的物种主要是甲醛、乙醛和正丁醛.研究区观测期间,环境空气中甲醛和乙醛的致癌性风险值分别为1.18×10^-5和5.91×10^-6,对暴露人群存在潜在的致癌风险;乙醛的非致癌风险值为...     

自动监控技术在环境监测中的应用

介绍了自动控制技术、在线监测技术以及现代信息和多媒体技术在环境监测工作中的应用,并阐述了自动监控技术在环境监测中应用价值及存在的困难。     

硅肥等量施用对土壤镉生物有效性和水稻吸收镉的影响

为研究硅（Si）肥等量施用对水稻不同生育期吸收镉（Cd）和土壤Cd生物有效性的影响,采用5种不同种类的Si肥（SiO₂用量为225 kg ·hm^-2）开展田间小区试验.结果表明,随着水稻生育期的延长,水稻根系和茎叶的Cd含量增加;施用Si肥,不同生育期水稻根系、茎叶和籽粒Cd含量平均分别降低14.9%、28.2%和12.2%;硅钙镁铁肥（SiCaMgFe）和水溶Si肥（SiW）处理,籽粒Cd含量分别比对照处理降低21.1%（P<0.05）和21.2%（P<0.05）;水稻根表铁膜中Cd含量（DCB-Cd）随着水稻生育期延长而增加,施用Si肥,水稻不同生育期DCB-Cd含量有高有低,DCB-Cd是根系Cd含量的15.8%~42.8%;与对照相比,施用Si肥水稻成熟期土壤可交换态Cd （Exc-Cd）含量平均降低36.4%,其它形态的含量平均增加12.5%~48.2%.水稻全生育期根系Cd与Si呈极显著负相关,与DCB-Cd呈极显著正相关,DCB-Cd与土壤有效态Cd和有效态Si呈极显著负相关,土壤Exc-Cd与Carb-Cd呈极显著负相关,土壤有效态Cd与pH值呈显著负相关.施用相同Si肥用量,SiCaMgFe和SiW处理降低水稻Cd含量的效果好;施用Si肥通过提高土壤pH值和土壤有效Si含量、降低土壤有效态Cd和Exc-Cd含量,促进Exc-Cd向Carb-Cd转移,减少根表铁膜对Cd的吸附,从而减少水稻对土壤Cd的吸收.     

Global burned-land estimation in Latin America using MODIS composite data.

This paper presents results of the AQL2004 project, which has been develope within the GOFC-GOLD Latin American network of remote sensing and forest fires (RedLatif). The project intended to obtain monthly burned-land maps of the entire region, from Mexico to Patagonia, using MODIS (moderate-resolution imaging spectroradiometer) reflectance data. The project has been organized in three different phases: acquisition and preprocessing of satellite data; discrimination of burned pixels; and validation of results. In the first phase, input data consisting of 32-day composites of MODIS 500-m reflectance data generated by the Global Land Cover Facility (GLCF) of the University of Maryland (College Park, Maryland, U.S.A.) were collected and processed. The discrimination of burned areas was addressed in two steps: searching for "burned core" pixels using postfire spectral indices and multitemporal change detection and mapping of burned scars using contextual techniques. The validation phase was based on visual analysis of Landsat and CBERS (China-Brazil Earth Resources Satellite) images. Validation of the burned-land category showed an agreement ranging from 30% to 60%, depending on the ecosystem and vegetation species present. The total burned area for the entire year was estimated to be 153 215 km2. The most affected countries in relation to their territory were Cuba, Colombia, Bolivia, and Venezuela. Burned areas were found in most land covers; herbaceous vegetation (savannas and grasslands) presented the highest proportions of burned area, while perennial forest had the lowest proportions. The importance of croplands in the total burned area should be taken with reserve, since this cover presented the highest commission errors. The importance of generating systematic products of burned land areas for different ecological processes is emphasized.     

浓度效应对卡马西平在生物炭上的吸附动力学影响

为了解人工合成药物在生物炭上的吸附动力学特征及其浓度效应的影响,选择卡马西平(CBZ)为目标污染物。探讨不同初始质量浓度(2、4、25、50 mg·L~(-1))在不同裂解温度(200、300、500℃)下制备的生物炭上的吸附动力学特征。结果表明,双室一级动力学模型可以精确地描述CBZ在生物炭上的吸附动力学特征。CBZ的快室吸附对总体吸附的贡献随初始浓度的增大而减小,而慢室吸附贡献则增大。π-π作用可能对CBZ的吸附贡献较大。孔隙填充可以描述慢室吸附过程,可能是吸附速率的控制环节。     

改性生物炭负载纳米零价铁去除水体中头孢噻肟

抗生素对环境的危害已经引起了人们的广泛重视.本实验以改性生物炭(MB)为载体制备了负载纳米零价铁的功能生物炭(Fe/MB).以头孢噻肟(CFX)为目标抗生素,研究了该材料对头孢噻肟的降解特性及影响因素,并探讨了去除机理.实验结果表明,50 min内头孢噻肟的去除率为92%(Fe/MB用量为0.4 g·L~(-1),溶液p H=5.0,头孢噻肟浓度为20 mg·L~(-1),振荡速率为200 r·min~(-1),柠檬酸浓度为1.47 mmol·L~(-1)).头孢噻肟的去除过程存在改性生物炭的吸附和纳米零价铁还原降解的协同作用,数据符合伪二级反应动力学方程(R20.99).采用紫外可见光谱结合质谱分析了降解产物的结构并提出头孢噻肟的降解途径.