Migration and transformation of heavy metals in hyperaccumulators during the thermal treatment: a review

Environmental Science and Pollution Research - The pollution of heavy metals (HMs) in the soil has become one of the important factors affecting the national environment and human health....     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

Research on the degradation mechanism of pyridine in drinking water by dielectric barrier discharge

Pyridine, an important chemical raw material, is widely used in industry, for example in textiles,leather, printing, dyeing, etc. In this research, a dielectric barrier discharge(DBD) system was developed to remove pyridine, as a representative type of nitrogen heterocyclic compound in drinking water. First, the influence of the active species inhibitors tertiary butanol alcohol(TBA),HCO_3~-, and CO_3~(2-)on the degradation rate of pyridine was investigated to verify the existence of active species produced by the strong ionization discharge in the system. The intermediate and final products generated in the degradation process of pyridine were confirmed and analyzed through a series of analytical techniques, including liquid chromatography–mass spectrometry(LC–MS), high performance liquid chromatography(HPLC), ion chromatography(IC), total organic carbon(TOC) analysis, ultraviolet(UV) spectroscopy, etc. The results showed that the degradation of pyridine was mainly due to the strong oxidizing power of ozone and hydroxyl radical produced by the DBD system. Several intermediate products including 3-hydroxyl pyridine, fumaric acid, 2, 3-dihydroxypyridine, and oxalic acid were detected. Nitrogen was removed from the pyridine molecule to form nitrate. Through analysis of the degradation mechanism of pyridine, the oxidation pathway was deduced. The study provided a theoretical and experimental basis for the application of DBD strong ionization discharge in treatment of nitrogen heterocyclic compounds in drinking water.     

夏季太湖CDOM光学特性空间差异及其来源解析

为进一步探究夏季太湖CDOM（有色溶解性有机质）光学特性在空间分布上的差异性与其来源的关系,对其紫外-可见吸收及三维荧光光谱特性进行了分析研究,在此基础上进一步分析了CDOM吸尘系数及其荧光组分（C1、C2、C3、C4）强度和各水质参数间的相关性.结合主成分分析法探讨了CDOM的来源以及与各参数指标[ρ（DOC）除外]之间的来源关系.结果表明:CDOM吸收系数α（355）、S值（光谱斜率）变化范围分别为3.27~8.27 m-1和0.011~0.021 nm-1;太湖西部、北部及南部湖区CDOM丰度较大,S值较低,受陆源输入的影响较为明显.CDOM的三维荧光光谱揭示其中含有两种类蛋白质组分C1和C2以及类腐殖质组分C3和C4,并且以类蛋白质组分为主.此外,大部分采样点的荧光指数（FI）为1.70~2.01,自生源指数（BIX）大于1,腐殖化指数（HIX）小于0.6,r_（T/C）（荧光峰T与荧光峰C荧光强度比值）小于2,表明夏季太湖CDOM内源特性相对强烈.研究显示,除ρ（DOC）外,CDOM与其他水质参数在第一主成分上（贡献率为90.8%）均存在显著相关关系,说明各水质参数的来源存在相似性,并且受生物自生源影响更为显著.      

排污权有偿使用与交易制度若干问题探析——以浙江省温州市为例

排污权有偿使用与交易制度是我国一项重要的环境经济政策。文章以温州市为例,从水环境管理视角出发,探讨排污权有偿使用与交易的若干问题。着重分析温州市初始排污权核定与分配的成效、存在的问题和解决途径,利用平均治理成本等方法设计排污权有偿使用价格,研究排污权交易的实现途径。在此基础上,文章提出应探索利用地方立法权制定排污权相关法律法规、完善初始排污权核定与分配方法、优化排污权竞拍机制和实施市场化激励政策等建议。     

燃煤电厂烟塔合一排烟风洞试验与数值模拟对比分析

近年来,燃煤电厂烟塔合一烟气排烟对近距离环境影响的不确定性,使其在国内的推广过程受到一定限制。准确判断烟塔合一排烟的环境影响,对于我国现有燃煤电厂烟气污染物的排放有着巨大的工程价值和明显的现实意义。利用国家环境保护某重点实验室中风洞试验平台,对燃煤电厂烟塔合一烟气污染物在近距离的扩散和传输行为,进行物理风洞试验以及数值模拟计算,并进行对比分析。结果表明:德国Austal2000模式的浓度预测并不精确;数值风洞也有其差异性,而物理风洞的结果在很大程度上符合现有的理论及国内工程实际。     

Ambient volatile organic compounds pollution in China

Owing to rapid economic and industrial development, China has been suffering from degraded air quality and visibility. Volatile organic compounds (VOCs) are important precursors to the formation of ground-level ozone and hence photochemical smog. Some VOCs adversely affect human health. Therefore, VOCs have recently elicited public concern and given new impetus to scientific interest. China is now implementing a series of polices to control VOCs pollution. The key to formulating policy is understanding the ambient VOCs pollution status. This paper mainly analyzes the species, levels, sources, and spatial distributions of VOCs in ambient air. The results show that the concentrations of ambient VOCs in China are much higher than those of developed countries such as the United States and Japan, especial benzene, which exceeds available standards. At the same time, the ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) of various VOCs are calculated. Aromatics and alkenes have much higher OFPs, while aromatics have higher SOAFP. The OFPs of ambient VOCs in the cities of Beijing, Guangzhou and Changchun are very high, and the SOAFP of ambient VOCs in the cities of Hangzhou, Guangzhou and Changchun are higher.     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

油品荧光特性的Logistic回归分析鉴别海上溢油的研究

用恒波长同步荧光法检测了280±2 nm、300±2 nm、332±2 nm 3个特征波长下的22种原油和12种燃料油的荧光强度,并以此作为变量,建立了快速定量鉴别海上溢油的原油和燃料油的Logistic回归模型。Hosmer-Lemeshow拟合优度检测值2.43小于15.51、其对应P值0.97大于0.05,说明建模数据的信息被充分提取和利用。风化前后油样的受试者工作特征曲线（ROC曲线）分析显示该鉴别方法准确性较高,曲线下边面积（AUC）大于0.9,灵敏度和特异性大于0.85。用15种非建模油样对所建立的模型进行验证,计算结果与实际情况吻合度较高,鉴别正确率达93%。此外,该模型也适用于油种风化后的鉴别。     

数显型电热板加热法在河流高锰酸盐指数应急监测中的应用研究

高锰酸盐指数常被作为地表水体受有机污染物和还原性无机物质污染程度的综合指标.采用数显型电热板加热法测定水中高锰酸盐指数,通过实验确定了加热时间和加热温度.并分别采用水浴法和电热板加热法对应急样品进行了高锰酸盐指数的测定,两种测定方法的比对研究结果表明,应急监测时采用数显型电热板加热法测定耗时更短,检测结果与国标法测定没有显著差异,是可行且有效的应急监测替代方法.