医药建设项目环境管理与监测计划探究

论述了医药建设项目环境影响的特点及制定环境管理与监测计划的必要性,指出了在医药类建设项目制定环境管理与监测计划过程中应重视的问题,结合实例,介绍了环境管理与监测计划的框架,完善环境管理及监测机构设置、人员的职责、制定环境保护制度、企业正常生产运行排污和非正常工况及事故污染状况下的具体监测内容,使环境管理与监测计划具有较强可操作性,更好地服务于环保管理工作.     

Impact of urban water supply on energy use in China: a provincial and national comparison

To reduce greenhouse gas (GHG) emissions and help mitigate climate change, urban water systems need to be adapted so that electrical energy use is minimised. In this study, energy data from 2011 was used to quantify energy use in China’s urban water supply sector. The objective was to calculate the energy co-benefits of urban water conservation policies and compare energy use between China and other countries. The study investigated influencing factors with the aim of informing the development of energy efficient urban water infrastructure. The average energy use per cubic metre and per capita for urban water supply in China in 2011 was 0.29 kWh/m³ and 33.2 kWh/cap year, respectively. Total GHG emissions associated with energy use in the urban water supply sector were 7.63 MtCO₂e, or carbon dioxide equivalent. Calculations using these indicators showed significant energy savings could result from water conservation measures. A comparison between provinces of China showed a direct correlation between energy intensity of urban water supply and the population served per unit length of pipe. This may imply energy and emission intensity can be reduced if more densely populated areas are supplied by a corresponding pipe density, rather than by a low-density network operating at higher flow rates. This study also found that while the percentage of electrical energy used for urban water supply tended to increase with the percentage of population served, this increase was slower where water supply was more energy efficient and where a larger percentage of population was already supplied.     

海水环境生物腐蚀污损与防护

以海水环境生物腐蚀污损与防护为中心,就国内外与其相关的报道进行综述分析,并提出建议。首先,分析污损生物的分布与特征,得出污损生物群落的组成和结构对海域、季节、水深、工程结构类型等的依赖性,突出海水环境生物腐蚀污损的复杂性。然后,解析生物附着污损对海水环境腐蚀速率的影响,突出附着生物是导致金属材料腐蚀速率增大的重要因子。再次,介绍海水环境生物腐蚀污损防护技术的现状,分析主要防护技术的优缺点,并展示其在不同行业的联用。最后,提出对海水环境生物腐蚀污损研究工作的建议,包括建立各海域的生物腐蚀污损数据库、大力研制发展绿色生物腐蚀污损控制技术、加强对海洋生物腐蚀污损基础性研究工作的投入、尽快建立海洋生物腐蚀评价标准和规范等。     

岷江下游五通桥段小型集水区大气降水中pH值对重金属含量的影响

为了解岷江下游大气降水中pH值及其重金属含量特征及污染状况,以五通桥段小型集水区为研究对象,分析了年降雨量、降水pH值和降水中的重金属含量季节变化,探讨了pH值与重金属之间的关系,并利用相关分析和聚类分析对大气降水中重金属来源进行了初步解析.结果表明:五通桥集水区年总降雨量为1199.42 mm,pH平均值为5.37,年降雨中42.86%为酸雨,3.57%为重酸性雨,10.71%为碱雨,且夏、春季比秋、冬两季略高.重金属As、Cd、Cu、Pb、Zn平均含量分别为10.33、5.75、14.68、53.15、922.37μg·L-1,其中,As和Cu含量低于地表水环境质量Ⅲ类标准.5种重金属含量在冬季明显高于夏季,春季含量略高于秋季,与大气降水pH值存在显著的负相关关系,在pH为3.8左右时各重金属含量最高,其中,As和Cd在pH 5.5左右、Cu和Pb在pH从5.5到6.0的过程中含量增加,达到次高值.5种重金属在降雨pH值大于7时含量最低.聚类分析结果表明,研究区大气中As、Cd、Cu、Pb、Zn主要来源于燃煤、汽车尾气、工业污染、矿石开采和钢铁生产.     

Specific antibody for pesticide residue determination produced by antibody-pesticide complex

A new method for specific antibody production was developed using antibody (Ab)-pesticide complex as a unique immunogen. Parathion (PA) was the targeted pesticide, and rabbit polyclonal antibody (Pab) and mouse monoclonal antibody (Mab) were used as carrier proteins. The Ab-PA complexes were generated by conjugating the two antibodies with an excessive dosage of PA. It was shown that the sensitivity of homologous enzyme-linked immunosorbent assay (ELISA) using the new antibodies was similar to that using original antibodies. However, the new mouse Pab had not only similar positive recognizing spectrum as the original Mab, but also a significantly improved sensitivity in heterologous ELISA when some recognizable competitors were applied. IC₅₀ value of ELISA based on a combination of the new mouse Pab and hapten 9 was 0.24 ng/mL, which was 445.54 times as that of the homologous ELISA. An Ab-pesticide complex may be a suitable alternative immunogen for producing highly specific antibody to improve the immunoassay sensitivity.     

Provenances of atmospheric dust over Korea from Sr–Nd isotopes and rare earth elements in early 2006

Sr and Nd isotopic composition of pre- and syn-Asian dust (Hwangsa) particles collected from three different water depths at two different offshore sites, western Korea and rare earth elemental composition of syn-Asian dust particles collected from three islands around the Korean Peninsula in late April 2006 were analyzed to interpret their provenance. The dust Sr–Nd isotopic compositions vary spatiotemporally, but they show specific values when the Hwangsa event occurred. Satellite images, airmass backward trajectory modeling, and comparison with Sr–Nd isotopic ratios and rare earth elements compositions of soils and desert sands of northern China all suggest the major source of dust particles for the late April 2006 Hwangsa event to be the Mu Us Desert in northern China. Dust particles of the pre-Hwangsa period include both background dusts and the previous Hwangsa event dust particles, and they are interpreted to have been originated from various arid regions of China such as the Hobq Desert, the Mu Us Desert, and the Taklamakan Desert in different times. Different background dust sources during pre-Hwangsa period in early 2006 resulted from the changing route of the westerlies.     

Evaluation of environmental impacts of food waste management by material flow analysis (MFA) and life cycle assessment (LCA)

This paper focuses on the evaluation of potential environmental impacts of food waste management practices by material flow analysis (MFA) and life cycle assessment (LCA) during different life cycle stages toward the environmentally sustainable options for Daejeon Metropolitan City (DMC) in Korea. The MFA and LCA studies were conducted to examine different recycling facilities of food waste. The results of the LCA study indicate that, among the different recycling methodologies currently in practice in DMC, Scenario 4 (wet and dry feed site) conduced to higher global warming potential (GWP) and higher acidification potential (AP), whereas Scenarios 2 (wet feed site 1) and 3 (wet feed site 2) resulted in the lowest impact. This is mainly due to the emission caused during the treatment stage. For eutrophication potential (EP), Scenario 1 (composting site) contributed to higher environmental impacts due to the emission of ammonia generated during the treatment process, while in case of photochemical ozone creation potential (POCP), the collection stage for all recycling facilities led to higher impacts to the environment due to the combustion of fossil fuels. This study indicates that the proper disposal of the final residues, such as solid sludge and screened materials, could aid in reducing environmental burdens.     

Advanced site diagnostic tool 3D‐CSIA for in situ remediation

In situ remediation is inherently considered “green remediation.” The mechanisms of destruction by in situ technologies, however, are often unseen and not well understood. Further, physical effects of amendment application affect concentration data in an identical manner as the desired reactive mechanism. These uncertainties have led to the weight‐of‐evidence approach when proving viability: multiple rounds of data collection, bench studies, pilot studies, and so on. Skipping these steps has resulted in many failed in situ applications. Traditional assessment data are often tangential to the desired information (e.g., “Is contaminant being destroyed or just being pushed around and diluted?” and “What is the mechanism of the destruction and can it be monitored directly?”). An advanced site diagnostic tool, “Three‐Dimensional Compound Specific Stable Isotope Analysis” (3D‐CSIA), can assess the viability of in situ technologies by providing definitive data on contaminant destruction that are not concentration‐related. The 3D‐CSIA tool can also locate source zones and apportion remediation cost by identifying plumes of different isotope signatures and fractionation trends. Further, use of the 3D‐CSIA tool allows remediation professionals to evaluate effectiveness of treatment and make better decisions to expedite site closure and minimize costs. This article outlines the fundamentals of advanced site diagnostic tool 3D‐CSIA in detail, and its benefit is highlighted through a series of case studies at chlorinated solvent–contaminated sites. © 2010 Wiley Periodicals, Inc.     

Preparation of controlled nano-MgO and investigation of its bactericidal properties

Nano-MgO is a good bactericide but with strong alkalinity in water due to its rapid hydrolysis. To control its hydrolysis rate and keep its bactericidal properties, we synthesized nano-MgO microspheres using chitosan-alginate system in this study. The synthesized nano-MgO release-controlled microspheres (nMgO-RCM) were with 0.98-1.20 mm of particle sizes. Also, their embedding ratio and loading percentage was 63.52% and 12.27%, respectively. Based on the characterization results, nano-MgO was only observed on surface of the nMgO-RCM. Its release rate from the nMgO-RCM could be controlled by the chitosan-alginate system, and the observed rate constant (k_obs) increased from 0.0289 h⁻¹ to 0.0358 h⁻¹ with the increment of the dosage from 10 mg L⁻¹ to 80 mg L⁻¹. Furthermore, the nMgO-RCM could maintain pH value lower than 8.5 and colony counts less than 20 CFU mL⁻¹ for at least 120 h.     

一种新的飞行事故征候率监视与控制方法

为了改进民用航空飞行安全的监控手段,探讨了一种飞行事故征候率的监视和控制方法。通过采用W检验法,对中国民航2008年各月飞行事故征候率统计数据进行正态分布拟合优度检验。结果表明:在10%的显著水平下,飞行事故征候率总体服从正态分布。假设正常情况下,飞行事故征候率超过警戒值的概率仅为0.1%,选择该概率为确定警戒值的标准。根据前一年12个月的飞行事故征候率统计数据和确定警戒值的标准,以子样均值作为母体均值估计量,子样无偏方差的平方根作为母体标准差的估计量,可计算出当年飞行事故征候率警戒值;此外,还提出了控制民用航空安全水平的准则。