电渗透脱水污泥干燥特性曲线及干燥模型简

通过电渗透脱水技术及自然风干技术两种预处理方式降低污泥含水率,当污泥初始含水率相近时,研究经两种方式处理后污泥的干燥特性曲线,并对电渗透脱水污泥干燥特性曲线的优势情况进行探讨。在40~120℃的低温条件下,研究电渗透脱水污泥（泥饼厚度为3.5 mm）的干燥特性曲线并分析其干燥特性。通过所得电渗透脱水污泥的干燥特性曲线,引入薄层污泥干燥模型进行数值分析。结果表明,在实验条件下,电渗透脱水污泥的干燥速率要优于自然风干污泥的干燥速率。随着温度的升高,电渗透脱水污泥的干燥速率随之升高,干燥到所需含水率的时间则随之减少。Logarithmic模型比其他模型更适合描述薄层电渗透脱水污泥在低温条件下的干燥特性。     

多层混凝土框架工业厂房震害预测

近年来,由于我国地震的频频发生,部分钢筋混土框架结构的严重破坏和倒塌,特别是许多工业厂房,虽然是严格按照国家规范设计建造的,但是在罕遇地震作用下,该类厂房仍然受到了较大的破坏[2]。对单体多层混凝土框架工业厂房震害预测的步骤进行了简述,并结合某开发区一个算例进行了对比分析,针对多层混凝土框架工业厂房的特点,提出抗震设计建议,为抗震设计、加固提供一定的借鉴作用。     

多层砌体房屋震害预测分析

对目前我国房屋建筑中一种最为广泛应用的结构形式房屋——多层砌体房屋进行震害预测分析研究,简要介绍六种常用的多层砌体震害预测方法,易损性概率分析法或称为半经验半理论法、强度判别法、延性系数判别法、模糊类比法、人工神经网络法和结构理论计算法,在详细调查房屋基本情况的基础上,综合考虑以上几种方法,提出相应的震害预测的分析方法。对郑东新区砌体房屋进行震害预测,做出该地区的震害矩阵,并给出该地区砌体房屋在地震作用下的破坏程度及相应震害面积。     

楼板对钢筋混凝土框架结构受力性能影响

汶川8级地震震害调查发现,这次地震中现浇钢筋混凝土框架结构多发生"强梁弱柱"型破坏,这与规范中"强柱弱梁"抗震设计原则相悖。为探究其原因,采用ABAQUS软件对钢筋混凝土带楼板框架和空框架结构进行了侧向加载情况的性能分析。通过对比纵向梁端钢筋应力变化和柱端钢筋应力变化,以及分析不同侧向位移对应的楼板钢筋的应力变化情况,指出楼板对梁端抗负弯矩能力的增强有很大贡献。研究了节点类型、楼板钢筋材性、侧向位移、梁高、梁跨和板厚等因素对纵向梁端处楼板有效宽度的影响规律,提出了负弯矩作用下梁端处楼板有效宽度的取值方法。     

遥感技术在城市建筑震害预测中的应用研究

长期以来,在城市的震害预测研究工作中,建筑物属性信息的主要获取方法是基于人工调查的传统方式。近年来,随着遥感技术的发展,尤其是高分辨率民用遥感卫星的成功发射,使得利用遥感技术进行城市震害预测成为可能。鉴于传统的信息获取方式存在的费时费力,数据获取周期长,数据信息时效性差等缺点,以郑州市中牟县的部分住宅区为例,对高分辨率遥感影像在城市震害预测中的应用做了相应研究。     

WILLINGNESS TO PAY FOR FLOOD RISK REDUCTION AND ITS DETERMINANTS IN JAPAN1

ABSTRACT: This study aimed to clarify public preferences for flood control measures in Japan, willingness to pay (WTP), and the main factors involved in WTP by applying the contingent valuation method. Findings showed that most residents surveyed expected some flood control measures, and revealed a diversity of interest in river management. WTP levels for different measures ranged from a mean of ¥2,887 to ¥4,861 and from a median of ¥1,000 to ¥2,000. However, WTP for additional flood risk reduction beyond initial levels was found to be zero. This was considered to be because WTP for flood risk reduction must be determined within a multi‐risk context. WTP for flood control measures may increase with per capita income, individual preparedness, and/or experience with flooding, but may decrease with distance from a river, acceptability of flood risk, and provision of environmental information. Furthermore, perception of flood risk may increase WTP, while perception of other risks may decrease it. Methods of dealing with environmental risk that were proposed in the survey may have affected WTP levels.     

复合生物反应器工艺对化纤废水的处理研究

在普通活性污泥系统的曝气池中投加一定量的填料构成复合生物反应器 ,可以增加曝气池中的生物体量至 6g/L左右 ,在HRT为 8h ,泥龄为 5d时 ,CODCr、氨氮的去除率分别提高了 2 0 %和9.6% ,容积负荷对复合生物反应器的脱氮能力影响较小。该工艺对污泥膨胀有较好的控制     

Experimental study on the control of black smoke pollution from the ceramic kilns based on the mechanism of the surfactant and coagulant

Aiming at the characteristics of carbon black, a new method of controlling the black smoke from the industrial coal-burning ceramic kilns by wetting was brought forward. The carbon black in the flue of coal-burning ceramic kiln was collected for the experiments, and its physical and chemical properties were studied in detail. In order to change the sedimentation and wettability state of the carbon black, the complex solution of the coagulant and surfactant was applied. After a series of orthogonal experiments, the complex solutions with better effects were chosen. Then, the sedimentation percentage of carbon black treated by the selected complex solutions was measured. The optimized complex solutions included Na₂SO₄ (100 mmol/L), sodium dodecyl benzenesulfonate (SDBS) (1.2 mmol/L) and polyacrylamide (PAM) (40 mg/L). After carbon black was absorbed, the complex solutions were clear and colorless. The complex solutions can be recycled, and the sedimentation percentage of carbon black is 94%.     

多轴差分吸收光谱仪对大气污染物SO2、NO2、O3的立体监测

多轴差分吸收光谱仪（MAX—DOAS）是用来监测大气中痕量气体成分的专用仪器,它能同时自动监测SO2、NO2和03三种污染气体,得到的垂直柱浓度对研究污染物的时空分布特点具有重要意义。分析了2011年5月下旬至2012年4月中旬期间MAX—DOAS在重庆市的测量数据,结果表明：夏季SO2的柱浓度高于其它季节,并在每个季节都出现了峰值：SO2与NO2之间浓度变化趋势相同,且最大小时浓度值都集中在上午;O3垂直柱浓度受气象条件和臭氧前体物的影响呈夏季高、秋冬低的季节性变化;通过多元回归建立了O3柱浓度与气象因素、前体物的关系式。     

Ten-year emission characteristics of atmospheric pollutants from incineration of sacrificial offerings in China

The incineration of sacrificial offerings is a significant widely practiced custom that is also a kind of neglected air pollution source in China. Our results showed that the emission factors of particulate matter, SO₂, CO, NO_x, and VOCs emitted from the incineration of sacrificial offerings with purification systems were reduced by 95%, 19%, 9%, 82%, and 42%, respectively, compared with those without a purification system, revealing a significant effect of the flue gas purification system on reducing particulate matter and gaseous pollutants. The emission level of air pollutants from the incineration of sacrificial offerings remained stable before 2013 and then showed a remarkable decrease after the implementation of China´s Air Pollution Prevention Action Plan in 2013. The emissions of TSP (total suspended particulate), PM₁₀, PM_2.5, and NO_x in 2009 were 8222, 6106, 5656 and 15,878 ton, respectively, obviously higher than 3434, 2551, 2305 and 8579 ton in 2019. Such trend was affected by both the quantity of incineration and the installation rate of purification systems after the Emission Standard of Air Pollutants for Crematory (GB 13801-2015) issued in China. Distinct spatial distribution of atmospheric pollutants from incineration of sacrificial offerings was found with higher in the east and south of China than the west and north of China, which is proportional to the regional economy and population. The maximum ground-level concentration typically occurred at 0.12-0.2 km from the pollution source, posing potential health risks to people entering and exiting funeral and burial sites and nearby residents.