Low-reactive circulating fluidized bed combustion (CFBC) fly ashes as source material for geopolymer synthesis

In this contribution, low-reactive circulating fluidized bed combustion (CFBC) fly ashes (CFAs) have firstly been utilized as a source material for geopolymer synthesis. An alkali fusion process was employed to promote the dissolution of Si and Al species from the CFAs, and thus to enhance the reactivity of the ashes. A high-reactive metakaolin (MK) was also used to consume the excess alkali needed for the fusion. Reactivities of the CFAs and MK were examined by a series of dissolution tests in sodium hydroxide solutions. Geopolymer samples were prepared by alkali activation of the source materials using a sodium silicate solution as the activator. The synthesized products were characterized by mechanical testing, scanning electron microscopy (SEM), X-ray diffractography (XRD), as well as Fourier transform infrared spectroscopy (FTIR). The results of this study indicate that, via enhancing the reactivity by alkali fusion and balancing the Na/Al ratio by additional aluminosilicate source, low-reactive CFAs could also be recycled as an alternative source material for geopolymer production.     

负载稀土元素活性碳纤维在微型反应器中净化NO废气

以NH3为还原剂,以活性碳纤维（ACF）、HNO,浸渍的ACF、负载CuO的ACF和负载La2O3的ACF为催化剂,在微型反应器中考察各种催化剂对NO催化还原的活性,并进行了差热-热重、扫描电镜分析。实验结果表明,ACF负载La能有效地改善催化剂的活性,且催化活性中心为非晶态的氧化物;当ACF负载20％的La2O3时具有最好的低温活性,NO的去除率最高可达92％以上。     

络合滴定法测定工业废水中的硫酸根离子

通过对乙二胺四乙酸（EDTA）滴定检测硫酸根离子法的改进，实现了可以同时消除钙、镁及其他重金属离子、碳酸根离子、磷酸根离子干扰的目的。该方法简单、快捷、准确度高，加标回收率为96．38％－99．69％，变异系数为1．2％－1．49％，尤其适用于污染较为严重水体的分析。     

AHP法在废水治理工程评价中的应用

应用层次分析法（ＡＨＰ）的原理，建立了废水处理工程的评价模型，并结合废水处理的实例进行了研究，结果证明了ＡＨＰ法是评价废水处理工程的有效方法。     

黑道凶日研究

本文提出的优势期和优势值是灾害年内出现机会最多的日期和强度，其中优势期就是黑道凶日。统计表明，黑道凶日位于节气日和节气之间的黄金分割日及其附近，在时空分布上具有许多特点。     

Co-metabolic transformation of the neonicotinoid insecticide imidacloprid by the new soil isolate Pseudoxanthomonas indica CGMCC 6648

A new imidacloprid (IMI) degrading bacterium Z-9 (deposited number CGMCC 6648) was isolated and identified as Pseudoxanthomonas indica by 16S rRNA gene analysis. Two metabolites were identified as olefin and 5-hydroxy IMI by liquid chromatography-mass spectrometry and nuclear magnetic resonance analysis. P. indica CGMCC 6648 degraded 70.1% of IMI (1.22 mmol L^?1) and formed 0.93 mmol L^?1 5-hydroxy IMI and 0.05 mmol L^?1 olefin IMI in 6 days and in the presence of 100 mmol L^?1 glucose. The half-life of IMI degradation was 3.6 days. P. indica CGMCC 6648 transforms IMI via a co-metabolism mechanism and different carbohydrates have significant effects on 5-hydroxy IMI formation, whereas different organic acids have substantial effects on olefin IMI production. Lactose is the best co-substrate for IMI degradation and 5-hydroxy IMI formation with 0.77 mmol L^?1 degraded and 0.67 mmol L^?1 formed in 48 h, respectively. Pyruvate is the best co-substrate for olefin IMI formation with 0.17 mmol L^?1 produced in 96 h for all carbon sources tested. Pyruvate significantly stimulates the conversion of 5-hydroxy IMI to olefin IMI, whereas glucose slightly inhibits this reaction. P. indica CGMCC 6648 rapidly degrades IMI and forms olefin IMI, which may enhance its potential for biodegradation of IMI and increase its insecticidal activity, which can decrease the IMI dosage required.     

CuO/γ-Al2O3类Fenton试剂降解丁基黄药

CuO/γ-Al2O3类Fenton试剂是降解丁基黄药的优良试剂。该试剂与传统的Fenton试剂相比,提高了反应的pH值,可在较高pH(4~5)条件下反应,而传统的Fenton试剂的适宜pH值一般在3以下。采用单因素实验和正交实验相结合的方法研究了pH、催化剂投加量、过氧化氢投加量以及反应时间对丁基黄药降解效果的影响,并对催化剂的使用寿命进行了探讨。研究结果表明,反应的最佳条件为:pH为4~5,催化剂投加量为6 g/L,过氧化氢用量为30 mg/L,反应30min。在此反应条件下,丁基黄药的降解率达98%以上;影响丁基黄药降解效果的因素大小顺序为:pH>反应时间>H2O2用量>催化剂投加量,其中pH对CuO/γ-Al2O3类Fenton试剂降解丁基黄药的影响最为显著。     

Poly(Ethylene Glycol) Grafted Starch Introducing a Novel Interphase in Poly(Lactic Acid)/Poly(Ethylene Glycol)/Starch Ternary Composites

The main purpose of this study is challenging to dramatically improve the toughness of poly(lactic acid) (PLA)/starch by adding poly (ethylene glycol) (PEG) into the composites and grafting PEG molecules onto the surface of starch particles. It was found that the surface grafting of PEG onto starch induced the presence of PEG-rich regions located around the starch particles, caused by migration and aggregation of free PEG molecules. A novel interphase transition layer between PLA and starch was formed, which showed great ability for cavitation and vested large-scaled plastic deformation to PLA matrix. Further mechanical properties tests indicated the formation of interphase layer significantly increase the elongation at break from 10.2 to 254.5%, and notched impact strength from 1.56 to 2.37?kJ/m² for PLA/PEG/starch ternary composites. The influence of PEG component, ethanol extraction and annealing was also investigated.     

Heavy metal distribution in soils near Palapye, Botswana: an evaluation of the environmental impact of coal mining and combustion on soils in a semi-arid region

Morupule Colliery near Palapye in eastern Botswana is the only coalmine in production in Botswana at present. Its coal is mainly used in the nearby coal-fired Morupule Power Station, which generates approximately 1,000 GWh of electricity per annum. After more than 30 years mining and more than 20 years of combustion, the sedimentation of outlet fly ash from the Morupule Power Station has increased concentrations of Cr, Ni, Zn and As by 13, 2.5, 16 and 5 ppm, respectively, in the fine portion (<53 μm) of surface soils for approximately 9 km downwind. Elements that have higher concentrations in coal have stronger small-particle association during coal combustion and are less mobile in surface soils, thus showing stronger contaminations in surface soils around the coal-fired plant. Although the degree of contamination of Cr, Ni, Zn and As from coal combustion in the Palapye area at present is low, it is necessary to monitor concentrations of these elements in surface soils routinely in the future. This study also reveals moderate Pb and Zn contaminations in the Palapye area. The former is due to the use of leaded petroleum in motor vehicle traffic and the latter is mainly due to the use of galvanized iron sheets in construction.     

中小型制革企业综合废水处理工程的设计与应用

采用载体固体床为主要处理单元，辅以高效混凝剂处理中小型制革综合废水，工程运行表明：在进水CODcr,SS,S^2-，总铬的平均浓度在762mg/L,732mg/L,31mg/L,15mg/L的条件下，排水中的CODcr,SS,S^2-，总铬平均浓度为129mg/L,95mg/L,0.47mg/L,0.8mg/L。处理后的水质达到了GB8978-1996《污水综合排放标准》中的Ⅱ级标准。