Effect of cadmium on nodulation and N2-fixation of soybean in contaminated soils

The effects of cadmium stress on nodulation, N2-fixation capabilities of the root nodule, the change in ultrastructure of the root nodule, soybean growth, and the distribution of cadmium in plants were studied. The results obtained show that the nodulation of soybean roots was greatly inhibited by the addition of Cd, especially at the addition level of 10 and 20 mg kg(-1) soil. The inhibition of plant growth, especially the root growth, increased as the cadmium concentration increased, with deleterious effects observed for the roots. The weight ratio of soybean root/leaf decreased as the Cd concentration increased, which might explain the reason for nodulation decreases. The results also indicate that N2-fixation of root nodule was stimulated to some extent at the low levels of Cd addition, but decreased sharply with further increase of the Cd concentration. High Cd levels were also associated with changes in the ultrastructure of root nodule, in which the effective N2-fixing area was reduced and the N2-fixing cells in the area also reduced. In addition, the results also reveal that the content of Cd in different parts of the plants was as follows: roots > stems > seeds, indicating that the accumulation of Cd by roots is much larger than that by any other part of the soybean plant, and might cause deleterious effects to root systems.     

生物质固体废物厌氧发酵过程中HS对产CH4作用研究进展

针对生物质固体废物量大面广,具有污染和资源利用双重特性,厌氧发酵能源化可促进其污染控制,且过程中部分有机成分在微生物作用下转化成腐殖质（HS）.通过分析厌氧发酵过程中HS转化规律、HS结构特征与氧化还原性能、腐殖质还原菌与产甲烷菌活性、产CH₄效率之间的响应关系和作用机制研究进展,总结凝练出生物质厌氧发酵系统内HS对CH₄的调控原理,为减少厌氧发酵系统内HS对产CH₄途径的抑制作用,提高发酵效率的技术研究提供理论支撑.     

沈阳市PM2.5离子成分对呼吸疾病门诊数影响研究

采用时间序列的半参数广义相加模型,在控制了长期趋势、"星期几效应"和气象因素等混杂因素的基础上,分析沈阳市大气污染物及PM_2.5中水溶性离子对呼吸系统疾病门诊就诊人数的影响,并按性别和年龄分层建模.结果表明：PM_2.5及其各离子成分与呼吸系统疾病门诊人数之间存在关联,并有明显的滞后效应.受冬季供暖燃煤排放影响,PM_2.5、NO₃^-和NH₄⁺呈显著关联,在滞后累积2d后风险最大.最佳滞后时间下,PM_2.5的浓度每增加10µg/m³,对应呼吸系统疾病日门诊就诊人数增加百分比（ER）为1.31%（95% CI：1.2%~1.43%）;离子成分SO₄^2-、NO₃^-、NH₄⁺、Cl^-、K⁺、Mg²⁺、Ca²⁺和Na⁺的浓度每增加1个4分位间距（IQR）,对应的呼吸系统疾病日门诊就诊人数增加百分比（ER）分别为3.22%（95% CI：2.81%~3.62%）、4.67%（95% CI：4.13%~5.22%）、5.41%（95% CI：4.49%~6.33%）、7.38%（95% CI：3.91%~10.96%）、0.14%（95% CI：-6.34%~7.07%）、7.64%（95% CI：-11.87%~31.47%）、3.57%（95% CI：-2.83%~10.39%）和0.46%（95% CI：-16.64%~21.06%）.PM_2.5、Cl^-、Mg²⁺、Ca²⁺和Na⁺对女性呼吸疾病门诊人数的影响比对男性的影响大.PM_2.5、SO₄^2-、Cl^-、Ca²⁺和Na⁺对≥65岁的老人门诊人数的影响比对15~65岁劳动年龄人群的影响大.表明不同性别、不同年龄由于生理结构和环境因素的不同而引起的差异不同.     

1951~2014年中国北方地区气温突变与变暖停滞的时空变异性

基于1951~2014年中国北方及周边地区357个气象站点平均最低气温、平均气温和平均最高气温年（月）数据,采用M~K检验等方法,分析了中国北方地区3类气温突变和变暖停滞特征的时空变异性.结果表明：研究区3类气温整体突变年（1978~1999年、1981~2002年、1981~2005年）、分布广泛的普遍突变年（1988年、1989年、1997年）及范围（3a）均依次变晚.整体上,突变年随纬度降低变晚,东北突变早于西北和华北地区.变暖停滞集中于1998和2007年及其前后,3类气温亦依次变晚（1994~2007年、1995~2009年、1998~2010年）,由黄河流域中段向其他方向越来越晚.突变至变暖停滞周期整体随纬度降低缩短（3~30a）,突变越早周期越长.西北地区突变与变暖停滞前后各时段均值温差最大（2.4℃）,温差在1℃左右站点分布最广泛.各时段升（降）温速率整体依次在0.01℃/10a、0.05℃/10a、-0.03℃/10a左右站点分布最广泛,突变后升温最快（0.02~0.16℃/10a）,且西北地区对升温贡献最大,变暖停滞后东北地区对降温贡献最大,2时段按平均最低气温、平均最高气温、平均气温顺序升（降）温速率递减.3类气温波动程度减弱,整体随纬度降低.高纬度、高海拔和山地地区突变和变暖停滞较周边地区偏早或偏晚,特征值较大.整个北方地区3类气温突变、变暖停滞、突变与变暖停滞时间及各时段特征值各自具有自身一致性的普遍规律.     

海域高温油田1株耐高温耐盐硫酸盐还原菌的筛选与生理特性及活性抑制

油田中硫酸盐还原菌(SRP)的生长代谢能产生大量H_2S,会引起油藏酸化和微生物腐蚀等严重的生产和环境问题,而关于油田环境中SRP微生物多样性与生理活性的研究仍十分缺乏.为了深入了解我国渤海湾海域高温酸化油藏中SRP代谢特点并探究其潜在危害控制方法,本研究采用厌氧纯培养技术从渤海湾某高温油田采出水中分离筛选到1株耐高温、耐盐的SRP菌株BQ1,研究了其生理特性,并评价了不同杀菌剂和代谢抑制剂对其产H_2S活性的影响.结果表明,菌株BQ1的细胞呈短杆状,大小为(1.2~2.5)μm×(0.5~0.8)μm,有运动性.尽管BQ1与普通脱硫弧菌(Desulfovibrio vulgaris Hildenborough)的16S rRNA基因序列相似性达99%,但两者生理特性具有明显差异.BQ1可在温度为14~70℃(最适30℃)、p H 6.0~9.0(最适7.0)、盐度为0%~10%条件下生长代谢.BQ1可利用甲酸钠、乳酸钠、乙酸盐等多种碳源,能以硫酸盐、亚硫酸盐、硫代硫酸盐或单质硫为唯一电子受体产生H_2S.次氯酸钠(600 mg·L~(-1))、苄基三甲基氯化铵(300 mg·L~(-1))或NaNO_3(800 mg·L~(-1))对BQ1产H_2S活性无明显抑制效果.戊二醛(50 mg·L~(-1))、溴硝醇(30 mg·L~(-1))、二氧化氯(50 mg·L~(-1))或NaNO_2(70 mg·L~(-1))可抑制BQ1产H_2S活性达30 d以上,是控制渤海湾高温油田微生物酸化的潜在有效抑制剂.     

Application of nanoparticle tracking analysis for characterising the fate of engineered nanoparticles in sediment-water systems

Novel applications of nanotechnology may lead to the release of engineered nanoparticles (ENPs), which result in concerns over their potential environmental hazardous impact. It is essential for the research workers to be able to quantitatively characterise ENPs in the environment and subsequently to assist the risk assessment of the ENPs. This study hence explored the application of nanoparticle tracking system (NTA) to quantitatively describe the behaviour of the ENPs in natural sediment-water systems. The NTA allows the measurement of both particle number concentration (PNC) and particle size distribution (PSD) of the ENPs. The developed NTA method was applied to a range of gold and magnetite ENPs with a selection of surface properties. The results showed that the positively-charged ENPs interacted more strongly with the sediment than neutral and negatively-charged ENPs. It was also found that the citrate coated Au ENPs had a higher distribution percentage (53%) than 11-mercaptoundecanoic acid coated Au ENPs (20%) and citrate coated magnetite ENPs (21%). The principles of the electrostatic interactions between hard (and soft) acids and bases (HSAB) are used to explain such behaviours; the hard base coating (i.e. citrate ions) will interact more strongly with hard acid (i.e. magnetite) than soft acid (i.e. gold). The results indicate that NTA is a complementary method to existing approaches to characterise the fate and behaviour of ENPs in natural sediment.     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.     

Soot reduction by addition of dimethyl carbonate in normal and inverse ethylene diffusion flames: Nanostructural evidence

Oxygenated fuel represents an attractive alternative as an additive for reducing soot emissions.Dimethyl carbonate(DMC) is an oxygenated compound which is a good option to reduce soot,but the detailed characteristics of soot produced from combustion of hydrocarbon fuels blended with DMC are still lacking. The present research studied the nanostructure and reactivity of soot particles in ethylene/DMC normal and inverse diffusion flames. High resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD), and thermogravimetric analysis(TGA)were used to analyze the nanostructure and reactivity of soot. It was found that DMC addition was effective in decreasing the average weights of soot formed in flames. The results of HRTEM images showed that soot particles obtained with DMC addition showed liquid-like material and tight bonding, and exhibited more highly disorganized layers, which give it higher reactivity than soot obtained without DMC addition. Furthermore, HRTEM was used to analyze soot fringe characteristics consisting of fringe tortuosity, fringe length, and fringe separation. XRD was used to crosscheck the results for fringe separation, and was consistent with HRTEM results. In addition, the mass loss curve of TGA experiments showed that DMC addition could enhance the reactivity of soot particles.     

粉煤灰提铝中间产物合成4A分子筛对氨氮的吸附行为研究

采用粉煤灰提铝中间产物合成4A分子筛,利用XRD、SEM、热重分析、化学成分分析、阳离子交换容量对4A分子筛进行表征.考察吸附时间、pH、分子筛投加量、氨氮初始浓度、共存阳离子对其吸附性能的影响,研究其对模拟废水中氨氮的吸附效果,并结合准二级动力学方程、吸附等温线研究吸附性能和机理.结果表明,初始浓度为50 mg·L~(-1)、4A分子筛投加量为5 g·L~(-1)、pH值为6~9、吸附时间为80 min时氨氮去除率可达71.34%;随着氨氮初始浓度升高,其去除率降低,吸附容量增加;共存阳离子Na~+、K~+、Ca~(2+)对NH_4~+有强烈的竞争吸附,Mg~(2+)无明显竞争作用.吸附过程符合准二级动力学方程和Freundlich模型.Langmuir吸附等温线显示最大吸附容量为20 mg·g~(-1).