自然灾害变动的集成预测模型及其应用

本文提出了以非线性回归拟合发展趋势、正弦函数逼近周期变动和马尔可夫链刻划随机扰动的集成预测模型，并应用于山东省农业自然灾害成灾面积的变动规律模拟，得到了较好的预测效果。理论和实践表明，集成预测模型优于传统的单模型预测，为预测具有复杂机制的自然灾害演变提供了一种新方法。     

气象卫星遥感在干旱监测中的应用

本文根据ＮＯＡＡ极轨气象卫星ＡＶＨＲＲ资料计算生成植被指数相对距平图用于旱情监测，并在江苏省１９９４年特大干旱中进行了应用服务     

我国废旧家电管理制度体系初探

在对我国废旧家电的属性进行分析的基础上,研究了我国废旧家电管理涉及的对象及主要任务,强调了我国建设废旧家电管理制度体系的必要性,并提出了一系列管理制度的建议.     

Influence of particle size on the aggregation behavior of nanoparticles: Role of structural hydration layer

More and more attention has been paid to the aggregation behavior of nanoparticles, but little research has been done on the effect of particle size. Therefore, this study systematically evaluated the aggregation behavior of nano-silica particles with diameter 130–480 nm at different initial particle concentration, pH, ionic strength, and ionic valence of electrolytes. The modified Smoluchowski theory failed to describe the aggregation kinetics for nano-silica particles with diameters less than 190 nm. Besides, ionic strength, cation species and pH all affected fast aggregation rate coefficients of 130 nm nanoparticles. Through incorporating structural hydration force into the modified Smoluchowski theory, it is found that the reason for all the anomalous aggregation behavior was the different structural hydration layer thickness of nanoparticles with various sizes. The thickness decreased with increasing of particle size, and remained basically unchanged for particles larger than 190 nm. Only when the distance at primary minimum was twice the thickness of structural hydration layer, the structural hydration force dominated, leading to the higher stability of nanoparticles. This study clearly clarified the unique aggregation mechanism of nanoparticles with smaller size, which provided reference for predicting transport and fate of nanoparticles and could help facilitate the evaluation of their environment risks.     

不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。     

Photo-degradation organic dyes by Sb-based organic-inorganic hybrid ferroelectrics

The organic-inorganic hybrid halide compounds have emerged as one of the most promising photoelectric material for their superior optoelectronic properties and hold great prospects for renewable energy substitutes and environmental protection as photocatalysis. Here, we report the optical properties of the Sb-based organic-inorganic hybrid ferroelectric materials: pyridine-4-aminium tetrachloroantimonate ((C₅H₇N₂)SbCl₄, sample 1), piperidin-1-aminium tetrachloroantimonate ((C₅H₁₃N₂)SbCl₄, sample 2) and tris(trimethylammonium) nonachlorodiantimonate (((CH₃)₃NH)₃Sb₂Cl₉, sample 3), which are a kind of exploited efficient photocatalysts. Samples 2 and 3 exhibit distinct photoelectric respond, which are mainly ascribed to their minor narrow band-gap compared with sample 1. For the ferroelectrics, the intrinsic of spontaneous polarization of sample 3 at room temperature is favourable for the separation of photogenerated electrons and holes within the photorespond process. Moreover, sample 3 shows the highest efficiency of photo-decomposed Rhodamine B (90.2% within 80 min) and Methyl Orange (MO) (97.4% within 50 min), thanks to the photo-excited electrons and holes promoting the formation of oxidative radical species during the photo-redox progress. These findings prove that the development of a novel Sb-based organic-inorganic hybrid halide compounds with good stability in the degradation of organic dyes paves a way to designing new photocatalyst.     

示波极谱滴定法测定工业废水中的氰化物

在ｐＨ为１０３的氯化铵氨水底液中,使氰化物与Ｎｉ２＋离子形成稳定物〔Ｎｉ（ＣＮ）４〕２－络离子,过量的Ｎｉ２＋离子用标准ＥＤＴＡ溶液返滴,以Ｎｉ２＋离子在交流示波极谱图上的切口消失指示滴定终点,废水的色度、浊度等对测定不产生干扰,无须进行预蒸馏处理,操作简便,快速。方法的相对偏差小于１０％,变异系数小于０７％,水样的加标收率为９６～１０７％。     

Fe3O4/ZrO2-H2O2非均相类Fenton体系对3,4-二氯三氟甲苯的降解

以浸渍法制备的新型纳米Fe3O4/ZrO2为催化剂,3,4-二氯三氟甲苯(3,4-DCBTE)为目标污染物,用Fe3O4/ZrO2-H2O2非均相类Fenton体系对目标污染物进行降解,考察催化剂的催化效果和温度、pH、H2O2投加量和掺杂比等因素对催化剂催化效果的影响。结果表明,以纳米Fe3O4/ZrO2作为催化剂的非均相类Fenton体系对3,4-二氯三氟甲苯的处理效果极佳;随着温度的升高,纳米Fe3O4/ZrO2的催化效果不断提高;当pH降低时,催化剂的催化效果有明显提升,原始pH(pH=5.7)时反应去除效果最佳,去除率可达88.6%;催化剂用量的增加同样可以提高3,4-二氯三氟甲苯的降解效率;催化剂中Fe3O4:ZrO2的物质的量比为1:2时效果较其他掺杂比的催化剂效果更好,去除率最终可以达到96.82%;当H2O2投加量增加时,3,4-二氯三氟甲苯的降解效率先提高后降低,投加量为0.3 mL时去除效果最好,几乎可以完全去除目标有机物。以Fe3O4/ZrO2-H2O2非均相类Fenton体系处理3,4-二氯三氟甲苯时,目标污染物的降解符合一级反应动力学。     

以游泳馆污水为处理对象的SBR中不同污泥负荷下氨氧化菌群落的演变

为了研究污泥负荷对SBR系统内活性污泥微生物中氨氧化菌群落结构的影响,应用聚合酶链式反应-变性梯度凝胶电泳(PCR-DGGE)技术,对不同污泥负荷条件下SBR处理经投加葡萄糖调节的游泳馆污水的活性污泥中氨氧化菌进行了分析。研究结果表明,氨氧化菌的群落结构在不同污泥负荷条件下变化明显,在有机碳源较低的情况下生长旺盛,随着污泥负荷的提高其DGGE图谱条带数量逐渐减少,亮度逐渐减弱;在高污泥负荷环境下,氨氧化菌受到严重抑制,多样性指数大幅下降,并从系统中消失。SBR系统内氨氧化菌大部分为不可培养的变形菌,最常见的氨氧化菌是β变形菌中的亚硝化螺菌和亚硝化单细胞菌。     

基于给水污泥吸附水溶液中磷的影响因素

以给水污泥为吸附材料,采用正交实验与单因素实验研究了多种因素对除磷效果的影响。正交实验结果表明最佳反应条件为:pH为3,粒径1.98 mm,投加量8.0 g/L,吸附时间24 h。结合SEM/XRD和EDS等表征方法,对给水污泥的表面形貌和结构特征进行表征和分析。Langmuir、Freundlich和D-R等温吸附方程均能较好的拟合给水污泥对磷的吸附特征。在298、308和318 K温度下,Langmuir拟合得到的理论饱和吸附量分别为3.47、3.84和4.39 mg/g。由D-R方程计算的吸附自由能E为10.77~10.83 kJ/mol,表明吸附过程为离子交换吸附。