Establishment of a comprehensive analysis method for the microfaunal movement in activated sludge

Environmental Science and Pollution Research - Microfaunal identification and analysis are very complex; thus, an image analysis method was utilized in this paper to overcome the shortcomings of...     

Nitrogen removal performance and bacterial communities in zeolite trickling filter under different influent C/N ratios

Environmental Science and Pollution Research - In this study, the degradation performance of nutrients in zeolite trickling filter (ZTF) with different influent C/N ratios and aeration conditions...     

Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs

Real-time monitoring and control of temperature in ultrasonic joining of battery tabs and coupons are important for the quality improvement and cost reduction of battery assembly. However, there have always been difficulties in accurate and real-time measurement of temperature by conventional sensors for practical implementation. In this study, an innovative method is developed to provide an enabling technology for the in situ transient temperature monitoring, which could provide reliable feedback signals for potential control of ultrasonic joining processes. Micro thin film thermocouples (TFTCs) were fabricated on thin silicon substrates, which were then inserted in the welding anvil as a permanent feature so that the sensors were always located about 100 μm directly under the welding spot during joining of multilayer Ni-coated Cu thin sheets for battery assembly. Good repeatability was demonstrated while a temperature rise of up to 650 °C was obtained due to the closeness of the sensors to the welding spot. The inserts with thin film sensors remained functional after welding experiments. This method has a great potential for in situ transient temperature monitoring, and thus the control of ultrasonic joining processes to realize a practical smart joining system.     

基于HSE作业指导卡的风险精细管控模式

结合胜利油田电力生产实际,提出了基于HSE作业指导卡的风险精细管控模式,介绍了HSE作业指导卡的格式内容、工作流程和实施效果。     

浓盐水处理技术研究进展

海水淡化技术是解决中国水资源危机的一种具有根本性的举措之一.然而随着海水淡化产业规模的增大,其产生的浓盐水的排放成了本身面临解决的问题之一.本文阐述了浓盐水的特性及其对环境的各种危害性,并对浓盐水直接排放问题进行了详细分析.介绍了国内外近年来主要处理浓盐水的方法-真空膜蒸馏浓缩技术、正渗透技术、喷雾蒸发技术、冷冻法浓缩技术.对各种处理技术的原理和特点进行了详细综述,并对其研究进展进行了归纳总结.最后对各项处理技术的应用前景提出了展望.     

近代我国海潮灾害的时空特征与等级

本文根据相关历史资料,对近代我国海潮灾害的时空特征、灾害等级等进行了初步研究。据不完全统计,近代我国共发生海潮灾害147次,平均每年发生1.34次,以一般海潮灾害为主,在前期记载较多,后期较少;多在秋季爆发,且月份集中在6、7、8月,具有明显的季节性、普遍性、连续性和集中性等特征;我国的东海是海潮灾害的频发区。     

漳江调水工程水质目标可达性研究

针对峰头水库和漳江干流,分别建立零维水质模型和一维非稳态水量水质数学模型,并对参数进行率定。对9种不同调水方案实施后漳江流域近期(2015年)和远期(2020年)水质情况进行预测,结果表明:随着调水量和排污量的增加,漳江水质远期差于近期,且取水口越往漳江下游设置,调水对漳江水质的影响越小;总体上调水对漳江水质影响不大,调水后漳江水质达到地表水Ⅲ类水标准;漳江调水工程从对水质影响方面来说是可行的。     

深水河大桥桥墩边坡稳定性分析

深水河大桥桥墩边坡地处广乐高速深水河大桥段,其稳定性直接关系着桥墩桩基工程能否顺利施工和整段广乐高速的工程进度。本文采用定性分析和定量计算的方法对深水河大桥桥墩边坡稳定性进行了分析,定性分析主要是通过赤平投影法作图初步分析边坡局部可能出现的组合滑面破坏模式,再取典型的楔形体进行破坏模式分析,定量计算主要是采用Bishop法分别计算该边坡在不同工况下的稳定系数,从而对该边坡的整体稳定性进行评价,以便提出相应的治理措施。     

废弃线路板热解油中酚类物质的提取与分离

将FR-4型废弃线路板热解,并对热解油中含量最多的组分-酚类物质进行分离提取.比较研究线路板热解油的分离提取方法,探索出"碱液处理-酸化-萃取-减压蒸馏"的新方法,对分离出的组分进行GCMS(气质联用)测试.结果显示运用该方法对FR-4型线路板的热解油进行提取分离,得到的总酚占热解油的62.0%,其中苯酚的最高纯度可达...     

火电厂低氮燃烧改造技术的应用

本文介绍了氮氧化物产生的机理以及低氮燃烧技术在火电厂大型燃煤锅炉的应用,简述其技术特点和改造措施,并通过试验测试了改造后的效果。