Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Magnetic graphene-based nanocomposites as highly efficient absorbents for Cr(VI) removal from wastewater

Environmental Science and Pollution Research - Due to the merits of their high adsorption and convenient separation, magnetic graphene-based composites have become a promising adsorbent in terms of...     

Sulfate-enhanced degradation of Rhodamine B in the hydrogen peroxide/hydroxylamine system

Environmental Chemistry Letters - Hydroxyl radicals are commonly produced either by metal activation or by using external energy. However, the application of these methods is limited by low working...     

露天矿山隐伏盲空区精确探测及爆破优化设计

隐伏盲空区是严重威胁露天矿山正常采矿作业的安全隐患,应予以探明并处置。针对露天矿隐伏盲空区探测难度大、崩落处置爆破设计精度差等问题,以白马铁矿1号溜井盲空区为例,首先基于矿山历史资料,利用钻探手段,初步圈定盲空区异常分布范围;然后运用钻孔激光扫描设备进行三维精确扫描,获得盲空区塌腔三维形态和真实边界,并以实测数据为基础,利用逆向建模方法,构建盲空区三维可视化模型;最后根据盲空区的三维空间特征和分布条件,进行爆破分区及参数优化设计。结果表明:采用钻探圈定结合三维激光精确扫描建模的综合探测方法,可获得露天矿山盲空区的可靠信息,准确掌握盲空区垮塌现状,进而为制定更为精准的爆破设计方案提供重要依据,最终达到消除盲空区的目的。研究结果对保障矿山安全生产具有重要意义,同时可为类似工程提供有益参考。     

谈企业成本控制

本文从企业的生产成本、资金成本和管理成本等三个方面,谈到了企业在生产经过中降低成本的有效途径和方法,从而增强企业在激烈的市场环境中的竞争力,达到“增收节支”的目的.     

油田开发项目中大气环境影响预测方法研究

针对油田开发过程中大气污染源点多面广的特点,选用适当的大气环境预测方法已成为问题关键,使用网格处理,分别计算点源（高斯模式）和面源（Ｈ－Ｇ模式）的污染贡献量,得到预测结果,并佐以百色油田的应用实例,得出：多源扩散模式（Ｈ－Ｇ模式）可以反映油田开发多源污染的叠加效果;Ｈ－Ｇ模式计算简便,要求参数少且容易获得,与复杂模式的计算结果相一致,能满足油田开发项目大气环境影响评价的要求。     

活性炭纤维电极法处理草浆造纸黑液的应用研究

用活性炭纤维（ＡＣＦ）电极法和酸析、凝聚处理加电极组合方法，对造纸黑液进行处理。结果表明，电极法处理黑液，ＣＯＤｃｒ、色度去除率分别达６４．２５％和９４％；“酸化＋电解（４５ｍｉｎ）＋Ｆｅｎｔｏｎ试剂”的综合治理方法效果较好，ＣＯＤｃｒ、色度去除率分别达９４．２％和９９．６％，出水近乎清澈透明。     

粤东一个类型独特的锡矿床

作者对西岭凤地山锡矿床的成矿地质条件,特别是火山构造、岩浆演化与成矿的关系进行了研究,认为:西岭锡矿是一个与火山侵出相碎斑熔岩时、空、成因关系密切的次火山热液脉状锡矿床。根据西岭锡矿的地质环境和成矿物理化学条件、矿质、水介质来源建立了理想的成矿模式。进而指出粤东斑岩锡矿的远景。西岭锡矿类型的确定,对粤东和赣南火山岩地区锡矿普查具有重要意义。     

《立体构成》课程建设中教学方法的改革与实践

本文通过对《立体构成》课程教学对象的分析，探讨了该课程在理论与实践教学环节教学方法的改进。实践证明，这些改进对于充分发掘学生潜力，激发学生的求知欲望，提高教师业务水平，促进《立体构成》课程教学改革具有重要意义。     

采用泥回流处理彩色显像管含氟废水

本文通过中和、混凝沉降法除氟过程,研究了彩色显像管工业废水除氟的适宜工艺条件。现场试验表明:应用泥回流处理技术,采用高效絮凝剂处理含氟废水,排放废水氟含量可稳定在4-6mg/L之间,低于排放标准（10mg/L）,同时废水处理的成本大大降低。