Remediation of soil contaminated with dioxins by subcritical water extraction

The effectiveness of subcritical water extraction (SCWE) was examined for removing dioxins from contaminated soil. Most dioxins in the soil sample were reduced at 300 degrees C or more, but decreased dioxin concentrations were also observed at 150 degrees C. After 4 h of extraction, 99.4%, 94.5% and 60% of PCDDs were removed from samples at 350, 300 and 150 degrees C, respectively. It was also determined that degradation of dioxins had occurred, since the sum of dioxins in the soil plus water extracts after the experiments had considerably decreased. This study revealed that pressurizing is not essential for the removal of dioxins. Reduction was complete within 30 min at 350 degrees C; however, it took a much longer time at lower temperatures. The results of addition experiments in which OCDDs were added to different types of soil samples have shown that dechlorination is one of the major reaction pathways. After addition of OCDD to soil samples, experiments were carried out to examine in detail the degradation pathways of PCDDs. The removal rates and congener profiles varied among soil types. Although it was previously assumed that removal rates and congener profiles depended on the chemical components in soil, nonparametric statistical analysis revealed no significant relationship between the rate of reduction and elements present in the soil. It was confirmed from isomer patterns that dechlorination of the 2,3,7,8-positions in PCDDs takes place somewhat faster than for the 1,4,6,9-positions.     

Modified clean-up for PBDD,PBDF and PBDE with an active carbon column--its application to sediments

A clean-up method for polybrominated dibenzo-p-dioxins (PBDDs), dibenzofurans (PBDFs) and diphenyl ethers (PBDEs) was modified using combinations of multi-layered silica gel, Florisil and active carbon columns. By using active carbon column chromatography in the final procedure, PBDEs were well separated from PBDD/Fs in an elution test with reference standards. We report the application of this method to sediment samples taken from industrialized areas in Japan. These sediments contained PBDEs ranging in concentration from 13 to 2394 pg/g, dry wt. PBDEs did not interfere with the quantification of PBDD/Fs. In addition, PBDEs found in the PBDD/F fraction did not interfere with the identification of PBDFs using the HRGC/HRMS separation method. Some 2,3,7,8-tetra- to hexabrominated dioxins and furans were also detected in the sediment samples.     

Impact of natural and calcined starfish (<Emphasis Type="Italic">Asterina pectinifera</Emphasis>) on the stabilization of Pb,Zn and As in contaminated agricultural soil

Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3–100 and 91.2–100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8–100 and 93.2–100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca–As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O) and portlandite (Ca(OH)₂) in the 10 % CSF-treated soil, while SEM–EDS analysis confirmed the needle-like structure of ettringite in which Pb was incorporated and stabilized in the 10 % CSF treatment.     

Fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone after the Great East Japan Earthquake

Residences located within 20 km of the damaged Fukushima Daiichi Nuclear Power Plant were evacuated shortly after the Great East Japan Earthquake. The levels of airborne and surface fungi were measured in six houses in the evacuation zone in August 2012 and February 2013. Airborne fungal levels in all of the houses in the summer were higher than the environmental standard levels for residential houses published in Architectural Institute of Japan (>1000 colony-forming units [CFU]/m³). In two houses whose residents rarely returned to visit, fungal levels were extremely high (>52,000 CFU/m³). Although fungal levels in the winter were much lower than those in the summer, they were still higher than environmental standard levels in several houses. Indoor fungal levels were significantly inversely related to the frequency with which residents returned, but they were not correlated with the air exchange rates, temperature, humidity, or radiation levels. Cladosporium spp. and Penicillium spp. were detected in every house. Aspergillus section Circumdati (Aspergillus ochraceus group) was also detected in several houses. These fungi produced ochratoxin A and ochratoxin B, which have nephrotoxic and carcinogenic potential. The present study suggests that further monitoring of fungal levels is necessary in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone, and that some houses may require fungal disinfection.

Implications: The results suggest that residents’ health could be at risk owing to the high levels of airborne fungi and toxic fungi Aspergillus section Circumdati. Therefore, monitoring and decontamination/disinfection of fungi are strongly recommended before residents are allowed to return permanently to their homes. In addition, returning to home with a certain frequency and adequate ventilation are necessary during similar situations, e.g., when residents cannot stay in their homes for a long period, because fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone were inversely correlated with the frequency with which residents returned to visit their houses.     

Molecular taxonomy of vestimentiferans of the western Pacific and their phylogenetic relationship to species of the eastern Pacific. I. Family Lamellibrachiidae

Phylogenetic relationships among vestimentiferans in the family Lamellibrachiidae collected from ten sites in the western Pacific were analyzed on the basis of the nucleotide sequence of part of a mitochondrial gene for cytochrome oxidase I. The 103 individuals analyzed were tentatively classified into five species: namely, Lamellibrachia satsuma, three tentative species inhabiting Japanese waters and one tentative species from the Manus Basin. Phylogenetic analysis of the four tentative species, L. satsuma, and two lamellibrachiids, whose sequences had been reported previously, namely L. columna from the Lau Basin and L. barhami from the Oregon Margin and the Middle Valley, revealed that the lamellibrachiids from Japanese waters were not monophyletic. While two tentative species from Japanese waters and L. columna formed a monophyletic group, the other tentative species from Japanese waters was closely related to the tentative species from the Manus Basin. L. satsuma was shown to be phylogenetically distinct from other lamellibrachiids of the western Pacific. A lamellibrachiid that had been collected from the Nikko Seamount was also demonstrated to be L. sastuma.     

Laser tempering based turning process for efficient machining of hardened AISI 52100 steel

Cost-effective machining of hardened steel components such as a large wind turbine bearing has traditionally posed a significant challenge. This paper presents an approach to machine hardened steel parts efficiently at higher material removal rates and lower tooling cost. The approach involves a two-step process consisting of laser tempering of the hardened workpiece surface followed by conventional machining at higher material removal rates with lower cost ceramic tools to efficiently remove the tempered material. The laser scanning parameters that yield the highest depth of tempered layer are obtained from a kinetic phase change model. Machining experiments are performed to demonstrate the possibility of higher material removal rates and improved tool wear behavior compared to the conventional hard turning process. Tool wear performance, cutting forces, and surface finish of Cubic Boron Nitride (CBN) tools as well as low cost ceramic tools are compared in machining of hardened AISI 52100 steel (~63 HRC). In addition, cutting forces and surface finish are compared for the laser tempering based turning and conventional hard turning processes. Experimental results show the potential benefits of the laser tempering based turning process over the conventional hard turning process.     

Distribution of tetrodotoxin in various organs of the starfish Astropecten polyacanthus

Tissues of various organs of the starfish Astropecten polyacanthus collected in the Hiroshima Prefecture from April 1985 to June 1986 were analyzed for lethal potency by the assay method for tetrodotoxin. The ovary showed the highest potency (47 to 1 450 MU g^-1), followed by the digestive organs (<10 to 960 MU g^-1) and the exoskeleton including spines and tube-feet (<10 to 170 MU g^-1). The pyloric caecum and testis were less toxic. Overall toxicity was remarkably higher in females (2 060±382 MU, mean±SE) than in males (1 106±214 MU).     

Arsenic,selenium, and chromium speciation in fly ash

Journal of Material Cycles and Waste Management - Arsenic (As), selenium (Se), and chromium (Cr) are harmful to humans at certain concentrations, and can possibly be eluted from coal ash (fly ash)...     

Evaluation of buckwheat and barley tea wastes as ethanol fermentation substrates

Buckwheat tea waste (BWTW) and barley tea waste (BTW), by-products of the beverage industry, are alternative carbohydrate sources for ethanol production. In this study, optimal enzyme loading for enzymatic saccharification of BWTW and BTW was determined, and simultaneous saccharification and fermentation (SSF) was performed by Saccharomyces cerevisiae and Mucor indicus to produce ethanol. Optimal enzyme loading for enzymatic saccharification of 2?% w/v BWTW and BTW was 0.5?% (weight of enzyme/weight of tea wastes) for BWTW and 0.1?% for BTW. Ethanol production from BWTW by S. cerevisiae and M. indicus after 48?h of SSF was 49.9/100?g of BWTW and 47.9/100?g of BWTW, respectively, with 0.5?% enzyme loading. Ethanol production from BTW by S. cerevisiae and M. indicus after 48?h of SSF was 20.5/100?g of BTW and 21.6/100?g of BTW, corresponding to 62 and 66?% of the theoretical yield based on starch content, respectively, with 0.1?% of enzyme loading. Furthermore, S. cerevisiae produced 76?% of the theoretical yield based on the total glucose from starch in BWTW and BTW when a mixture of BWTW and BTW was used as a substrate, with 0.2?% enzyme loading and no additional nitrogen or mineral sources.     

Fabrication of bulk materials with zeolite from coal fly ash

After packing a compact of coal fly ash mixed with 3.5?M (mol/L) sodium hydroxide solution into a cylindrical plastic mold at 80?°C and 50?% relative humidity for 24?h, the plastic mold was released and the compact was immersed in 3.5?M sodium hydroxide solution at 80?°C for 48?h. When the resultant compact was removed from the solution and cured at 80?°C and 50?% relative humidity for 7?days, a bulk material with zeolite was formed. The strength of the resultant bulk material was a result of the formation of geopolymer (alkali-activated cement). The specific surface area and the compressive strength of the bulk body sample were 21.4?m²/g and 29.0?MPa, respectively. According to a quantitative analysis conducted using the X-ray diffraction (XRD) technique, the content of the formed Na-P type zeolite was estimated to be approximately 28.2?% in mass ratio. The pore size of the resultant bulk materials with zeolite ranges from sub-nanometer to several tens of nanometers, so the resultant bulk material with zeolite exhibited excellent water vapor retention characteristics.