基于光纤分布式测温的污水管道入流识别方法研究

针对排水管网物探检测需断水操作和无法对管道内部实时探查的问题,建立了一种基于光纤分布式测温的污水管道入流诊断方法,实现了无干扰条件下污水管道污水和雨水入流实时监控.采用感温光缆对选择的试验管段开展了时空高精度观测(空间精度1m、时间精度1min),获得了超过118万个管道水温数据.基于解析出的管道水温时空图像,提出了基于水温温差背景噪声值的入流定位方法;确定出无外部入流影响时管道水温空间和时间温差的背景噪声值分别约为±0.2℃和±0.5℃.采用水温图像降噪处理方法,自动识别出污水管道的旱天污水接入和雨天雨水接入事件,与现场调查结果一致.因此,该方法对污水管道入流的动态识别定位具有可靠性.     

2种有机污染物对鲈鱼生化标志物系统的影响及作用评价

实验生态条件下筛选了鲈鱼的一组生化标志物组成生化标志物系统,研究其对不同有机污染胁迫的响应差异.将鲈鱼分别暴露于2种有机污染物:0.1 mg/L、1 mg/L的十二烷基苯磺酸钠(SDBS)和2μg/L、20μg/L的苯并[a]芘(B[a]P),研究长时间(18 d)、亚致死污染胁迫下鲈鱼生化标志物系统各组分:肝脏组织抗氧化酶中的超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、谷胱甘肽过氧化物酶(Gpx)、谷胱甘肽(GSH)、谷胱甘肽硫转酶(GST)以及诱导型一氧化氮合酶(iNOS)和脑组织中乙酰胆碱脂酶(AChE)活性的变化,同期检测了热激蛋白70(Hsp70)表达的变化,并对所得到的结果进行了主成分分析(PCA).结果表明,①与未受胁迫的对照组相比,B[a]P胁迫能够显著诱导鲈鱼体内的SOD、GST、Gpx活性以及GSH含量的变化(p0.05),但对其它几种酶的活性影响并不明显;SDBS胁迫对CAT、Gpx、iNOS和AChE活性的诱导作用明显,但对SOD、GST和GSH的影响较小.Gpx是对2种污染物胁迫响应最灵敏的一种生化标志物.②同时测定了不同胁迫条件下鲈鱼血细胞Hsp70表达的影响,结果发现其在SDBS胁迫组中的表达始终高于对照组,而B[a]P在胁迫前期能诱导Hsp70表达升高,以后逐渐下降至对照水平.③鲈鱼的生化标志物系统的不同组分对不同种类的污染胁迫响应有明显差异,对结果进行主成分分析(PCA)后发现,基于PCA和生化标志物系统的研究方法能有效区分不同污染因子的作用,可能在海洋环境污染的早期、预警性评价中具有良好的应用前景.     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

高分子量高纯度阳离子聚丙烯酰胺的合成

以丙烯酰胺与丙烯酰氧乙基三甲基氯化铵为单体,在复合引发剂的作用下,选择水溶液共聚法合成高分子量与高纯度阳离子型聚丙烯酰胺(CPAM)。实验表明,有机偶氮引发剂A用量0.5‰、氧化还原引发剂用量0.45‰、还原剂与氧化剂摩尔比2∶1、反应体系pH为4与反应时间5 h条件下,CPAM分子量为1 042万,且溶解性好。通过对聚合物残单含量影响因素添加剂用量、反应时间的研究,结果表明,添加剂EDTA和增溶剂D对残留AM含量影响小,而苯甲酸钠对聚合物残留AM的含量影响显著;延长反应时间至7 h,残单含量可降低至0.27%,CPAM的纯度高。通过与国内外3种同类型产品进行对比,结果表明,自制产品的分子量明显高于其他产品,且残单含量比国内产品降低了50%～75%。     

被动加标在水生生态风险评价中的应用——以多氯联苯分配系数的测定为例

准确的水生生态风险评价需要可靠的毒性数据,而其获取要求在一定时间范围内,水体中污染物的浓度保持恒定。对疏水性有机污染物进行水体生物毒性测试时,通常采用有机溶剂加标,然而该方式可能因为污染物的挥发和降解、容器壁吸附、生物摄取等问题,水体中污染物浓度持续下降,导致污染物的浓度-效应关系难以明确。近期为了克服这些问题,被动加标用于替代溶剂加标,通过污染物在加标体系中平衡分配来维持精确和恒定的水体浓度,同时还可通过测定加标聚合物中污染物的浓度来监测水体浓度。首先介绍了被动加标方法及其材料选择,讨论了该方法在生态风险评价中的主要应用,包括分配系数的测定、体外细胞测试、体内生物积累及毒性测试,以及沉积物毒性评价等。然后,以测定代表污染物多氯联苯在聚二甲基硅氧烷与水间的分配系数为例,详细说明被动加标的操作流程。最后,讨论了被动加标方法的优缺点,并对其在水生生态风险中的应用前景进行了展望。     

全氟辛烷磺酸(PFOS)和多壁碳纳米管(MWCNTs)复合对斑马鱼外周血红细胞DNA的损伤

为了评价全氟辛烷磺酸(PFOS)和多壁碳纳米管(MWCNTs)对水环境及鱼类的影响,以斑马鱼为模式生物,研究了PFOS和MWCNTs复合对斑马鱼外周血红细胞的DNA损伤。将成年斑马鱼暴露于PFOS(0.2、0.4、0.8、1.6 mg·L-1)、MWCNTs(50 mg·L-1)、PFOS+MWCNTs(0.2+50、0.4+50、0.8+50、1.6+50 mg·L-1)和对照溶液中30 d后,断尾取血进行微核试验和彗星试验。结果表明:PFOS和MWCNTs均可造成斑马鱼外周血红细胞的DNA损伤。1.6 mg·L-1PFOS处理组的微核率、Olive尾矩及尾长分别为(36.3±0.25)‰、(87.91±14.90)μm和(250.49±34.71)μm。PFOS与MWCNTs复合后,斑马鱼外周血红细胞的DNA损伤效应明显降低。复合处理组斑马鱼外周血红细胞的微核率、Olive尾矩及尾长均低于PFOS单独处理相。1.6 mg·L-1复合处理组的微核率、Olive尾矩及尾长比PFOS单独处理组分别降低了24.7%、68.9%、52.4%。因此,在实验浓度范围内,MWCNTs可以降低PFOS对斑马鱼外周血红细胞的DNA损伤。     

二维平流扩散模型下的集合卡尔曼滤波模拟同化研究

为提高环境数值预报水平,构建了一个针对污染物扩散的模拟数据同化系统。采用集合卡尔曼滤波方法对二维平流扩散模型的状态变量进行了实时校正,实现污染物浓度的实时模拟预报,完成了敏感性实验中集合数目变化、观测方差变化和同化窗口长度变化研究。比较考察观测点位置与污染源距离不同时的预报效果,探讨了优化条件下的同化策略,提出一种根据距离远近动态调节卡尔曼增益权重的方法。在集合数目较小时,可降低计算代价,得到优化的同化效果。     

Antibiotic resistance and plasmid profiling of <Emphasis Type="Italic">Vibrio</Emphasis> spp. in tropical waters of Peninsular Malaysia

Vibrio species isolated from four different sampling stations in the west coast of Peninsular Malaysia were screened for their antimicrobial resistance and plasmid profiles. A total of 138 isolates belonging to 15 different species were identified. Vibrio campbellii, V. parahaemolyticus, V. harveyi, and V. tubiashii were found to predominance species at all stations. High incidence of erythromycin, ampicillin, and mecillinam resistance was observed among the Vibrio isolates. In contrast, resistance against aztreonam, cefepime, streptomycin, sulfamethoxazole, and sulfonamides was low. All the Vibrio isolates in this study were found to be susceptible to imipenem, norfloxacin, ofloxacin, chloramphenicol, trimethoprim/sulfamethoxazole, and oxytetracycline. Ninety-five percent of the Vibrio isolates were resistant to one or more different classes of antibiotic, and 20 different resistance antibiograms were identified. Thirty-two distinct plasmid profiles with molecular weight ranging from 2.2 to 24.8 kb were detected among the resistance isolates. This study showed that multidrug-resistant Vibrio spp. were common in the aquatic environments of west coast of Peninsular Malaysia.     

真空紫外光降解苯的研究

为了考察真空紫外光辐射在气体净化中的应用,以苯作为目标污染物,分别进行了紫外光波长、气体湿度、反应时间、初始浓度以及辐射功率对苯光解率的影响实验。实验结果表明,真空紫外光辐射方法净化气相污染物中的苯效果良好,在一定条件下,浓度为348.2 mg/m³苯污染气体真空紫外光降解率可达到90%。通过在不同条件下苯的降解率以及臭氧浓度变化,初步探讨了苯降解的机理以及降解途径。苯的降解主要是通过氢氧自由基（·OH）的加成以及后续一系列的氧化反应,降解产物为苯酚以及含有羟基的长链烃。     

Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes

A new electrocoagulation process based on bipolar aluminum electrode is proposed. The placement angles of bipolar electrode are key parameter. The numerical simulations support the experimental results. We in our previous study reported the wireless electrocoagulation (WEC) based on bipolar electrochemistry for water purification. One of the most important advantages of WEC is the omission of ohmic connection between bipolar electrode (BPE) and power supply, and thus the electrochemical reactions on BPE are driven by electric field in solution induced by driving electrodes. In this study, the impact of placement angle of bipolar aluminum electrode on WEC was investigated to provide a detailed analysis on the correlations between the bipolar electrode placement angle and bipolar electrocoagulation reactions. The results showed that the WEC cell with a horizontal BPE placed at 0° produced the maximum dissolved aluminum coagulant, accounting for 71.6 % higher than that with a vertical one placed at 90°. Moreover, the finite element simulations of current and potential distribution were carried out along the surface of BPE at different placement angles, revealing the mechanism of different BPE placement angles on aluminum dissolution rates in WEC system.