镉对单环刺螠非特异性免疫及组织蓄积的影响

为探究镉(Cd)对海洋动物的毒性效应,考察了不同质量浓度(0.005、0.05和0.5 mg·L~(-1)) Cd处理对单环刺螠相关免疫生理指标及主要组织中Cd蓄积量的影响。结果表明:Cd胁迫下,血细胞密度(density of hemocyte, DHC)先升后降再升,酚氧化酶(phenoloxidase, PO)活力先升后降,溶菌酶(lysozyme, LSZ)活力先降后升再降,至处理96 h,处理组DHC均显著高于对照组(P0.05),总蛋白含量变化不显著;除低浓度胁迫组(0.005 mg·L~(-1))PO活力与对照组相近外,其他处理组的PO和LSZ活力均显著低于对照组(P0.05)。超氧化物歧化酶(superoxide dismutase, SOD)活力和丙二醛(malondialdehyde, MDA)含量总体呈上升趋势,过氧化氢(H_2O_2)含量先升后降再升,至胁迫96 h,各处理组SOD活力、MDA和H_2O_2含量均显著高于对照组(P0.05)。总之,Cd胁迫对单环刺螠非特异性免疫影响显著,Cd的短期胁迫可刺激DHC、PO和LSZ升高,免疫力增强,而高浓度Cd的胁迫时间较长会造成机体解毒能力下降,持续刺激机体产生过氧化反应,MDA含量升高,可作为单环刺螠在Cd长期胁迫下的免疫检测指标。不同胁迫浓度组单环刺螠肌肉和消化道中的Cd含量随胁迫时间均呈上升趋势,且存在显著的时间-剂量-效应关系(P0.05),其蓄积量水平为:消化道肌肉,具有组织特异性。     

磷酸三苯酯(TPP)和磷酸三(2-氯异丙基)酯(TCPP)诱导人胚肾细胞HEK293凋亡的机制研究

磷系阻燃剂对人体的潜在毒性作用引起了国内外研究者的广泛关注。肾脏是机体重要的排毒器官,若肾脏细胞受损,可能影响肾脏功能的正常发挥。本研究以人胚肾细胞HEK293为研究对象,结合传统毒理学实验,筛选出磷酸三苯酯(TPP)及磷酸三(2-氯异丙基)酯(TCPP)诱导人胚肾细胞HEK293凋亡的关键靶标基因p53。在此基础上采用分子对接模拟和光谱法分析发现,TPP和TCPP分别以嵌插方式和沟槽方式结合p53-DNA,改变基因片段的框架结构,启动分子起始事件,通过影响相关基因(Bax、Hrk、Bcl-2和Bad)的表达量,导致线粒体途径释放cyt c,最终激活Caspase 7实现细胞凋亡。研究结果阐明了此类污染物诱导凋亡的作用机制,为毒害化学品的污染防控提供理论依据。     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

Influence of low molecular weight anionic ligands on the sorption of heavy metals by soil constituents: a review

Environmental Chemistry Letters - The sorption of heavy metals by soil constituents reduces the absorption of these pollutants by crops and vegetables, and thus limit food contamination. Low...     

Effects of cultivation strategies on the cultivation of Chlorella sp. HQ in photoreactors

Heterotrophic cultivation caused high level of ROS and high lipids accumulation. HMTC is the best culture strategy for improving the microalgal biomass. Chlorella sp. HQ had great nutrient removal capacity under five culture strategies. The effects of cultivation strategies (including autotrophic cultivation (AC), heterotrophic cultivation (HC), fed-batch cultivation (FC), heterotrophic+ autotrophic two-stage cultivation (HATC), and heterotrophic+ mixotrophic two-stage cultivation (HMTC)) on the growth and lipid accumulation of Chlorella sp. HQ and its total nitrogen (TN) and total phosphorus (TP) removal in secondary effluent were investigated in column photoreactors. The results showed that the TN and TP removal rates ranged between 93.72%–95.82% and 92.73%–100%, respectively, under the five different strategies. The microalgal growth potential evaluated by the maximal growth rate (R_max) was in the order of HMTC>HC>FC>AC>HATC. The values of biomass, total lipid yield, triacylglycerols (TAGs) yield, and total lipid content of the microalga cultivated in the last 5 d increased significantly, but the TAGs productivities of the five strategies were lower than those in the first 7 d. Compared with all the other cultivation strategies, the TAGs productivity and yield after 12 d of cultivation under the heterotrophic condition reached the highest values accompanying the highest level of intracellular reactive oxygen species (ROS), in which the TAGs yield reached 40.81 mg/L at the end of the cultivation period. The peaks in TAGs yield and ROS level suggested that HC was beneficial for lipids accumulation via regulating the cellular redox status and exerting ROS stress on microalgal cells. In summary, HMTC was the best cultivation strategy for improving the microalgal biomass and HC was the best strategy for microalgal TAGs accumulation to produce biodiesel.     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Degradation of antipyrine in the Fenton-like process with a La-doped heterogeneous catalyst

A La-doped Co-Cu-Fe catalyst was synthesized for the antipyrine (ANT) removal. The La-doped catalyst had higher ANT removal than the control (95% vs. 54%). La reduced the particle size and increased the specific surface area of catalyst. The aim of this study was to synthesize a novel lanthanum (La) doped catalyst and to investigate antipyrine removal in wastewater using the Fenton-like process with the catalyst. The La-doped Co-Cu-Fe catalyst was synthesized using the modified hydrothermal method. Results showed that the La-doped catalyst had higher specific surface area and lower particle size than the catalyst without La doping (i.e., the control) (267 vs. 163 m²/g and 14 vs. 32 nm, respectively). Under the conditions of catalyst dosage 0.5 g/L, H₂O₂ concentration 1.70 g/L, and NaHCO₃ 0.1 g/L, the antipyrine removal within 60 min using the Fenton-like process with the La-doped catalyst was much higher than that with the control (95% vs. 54%). The hydroxyl radical concentration with the La-doped catalyst within 60 min was two times higher than that with the control (49.2 vs. 22.1 mg/L). The high catalytic activity of La-doped catalyst was mainly attributed to its high specific surface area based on the X-ray photoelectron spectroscopy result. Our La-doped catalyst should have great potential to remove antipyrine in wastewater using the heterogeneous Fenton-like process.     

浅埋衬砌隧道-邻近建筑地震动力相互作用IBEM模拟

采用高精度间接边界元方法(IBEM)考察地震波入射下隧道-邻近建筑物二维地震动力相互作用的规律。结果表明:建筑物与邻近隧道存在着明显的相互作用,整体动力反应规律取决于隧道,建筑物之间的空间位置关系、隧道埋深、入射波的频率和角度等因素。隧道位于建筑物正下方时,刚性衬砌隧道(相对围岩)对上部结构主要表现为隔震效应;隧道位于建筑物两侧时,隧道对建筑顶部位移有明显放大效应,最大可放大约40%。同时隧道应力也明显增大,最大可放大约43%。因此实际中需根据隧道-建筑物的空间位置关系,适当调整衬砌隧道与沿线建筑物的抗震设防水平。     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Photochemical degradation kinetics and mechanisms of norfloxacin and oxytetracycline

Environmental Science and Pollution Research - The photochemical degradation of norfloxacin (NOR) and oxytetracycline (OTC) was investigated under ultraviolet (UV) irradiation. The results...