Formation and instability of aerobic granules under high organic loading conditions

The cultivation and instability of aerobic granular sludge in a sequencing batch reactor under high loading conditions were investigated. Compact bacteria-dominated aerobic granules with a mean diameter of 1 mm were formed at a chemical oxygen demand (COD) loading rate of 6.0 kg m(-3) d(-1) within 30 d. However, the compact bacteria-dominated aerobic granules were not stable and transited to large-sized filamentous ones gradually. With the formation of bacteria-dominated granules, the hydrophobicity and specific gravity of the sludge increased. When the granules were transited to filamentous ones, the hydrophobicity and specific gravity decreased. Both granules had a high COD removal efficiency, excellent settling ability and showed a clear, regular round-shaped outline. After the filamentous granules reached a diameter of 16 mm, due to the mass transfer limitation and the possible presence of anaerobes in the inner part of the granules, they began to disintegrate and be washed out of the reactor, follow by failure of the reactor.     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

Lead adsorption capacities of different components in natural surface coatings

Pb adsorption capacities of Fe oxide, Mn oxide and organic materials in natural surface coatings (biofilms and associated minerals) collected in three lakes, two ponds and a river in Jilin Province, China and Cayuga Lake in US were studied. A novel extraction technique was employed to remove one or more component(s) from the surface coatings. Pb adsorption to surface coatings before and after extraction was performed to determine the adsorptive properties of the extracted component(s). The statistical analysis of observed Pb adsorption was carried out using nonlinear least squares fitting (NLSF) to estimate the Pb adsorption capacity of each component of surface coatings. For each body of water, the estimated Pb adsorption capacity of Mn oxide( mol Pb/mol Mn) was significantly higher than that of Fe oxide( mol Pb/ mol Fe). The value of estimated adsorption capacities of organic materials with the unit mol Pb per kg COD was similar to or less than that of Fe oxides with the unit mol Pb per mol Fe. Comparison of components of surface coatings in different waters showed that the estimated Pb adsorption capacities of components in surface coatings developed in different natural waters were different,especially for Mn oxides.     

Effects of seawater salinity on nitrite accumulation in short-range nitrification to nitrite as end product

The effect of seawater salinity on nitrite accumulation in short-range nitrification to nitrite as the end product was studied by using a SBR. Experimental results indicated that the growth of nitrobacteria was inhibited and very high levels of nitrite accumulation at different salinities were achieved under the conditions of 25--28℃, pH 7.5--8.0, and the influent ammonia nitrogen of 40--70mg/L when seawater flow used to flush toilet was less than 35% (salinity 12393 mg/L, Cl^- 6778mg/L) of total domestic wastewater flow, which is mainly ascribed to much high chlorine concentration of seawater. Results showed that high seawater salinity is available for short-range nitrification to nitrite as the end product. When the seawater flow used to flush toilet accounting for above 70% of the total domestic wastewater flow, the removal efficiency of ammonia was still above 80% despite the removal of organics declined obviously(less than 60% ). It was found that the effect of seawater salinity on the removal of organics was negative rather than positive one as shown for ammonia removal.     

UV-catalytic treatment of spent caustic from ethene plant with hydrogen peroxide and ozone oxidation

The performance of UV/H2O2, UV/O3 and UV/H2O2/O3 oxidation systems for treating spent caustic from an ethylene plant was investigated, in UV/H2O2 system, with the increase of H202 dosage, removal efficiencies of COD and the ratio of biochemical oxygen demand(BOD) to chemical oxygen demand(COD) of the effluent were increased and a better performance was obtained than the H2O2 system alone. In UV/H2O2 system, removal efficiency of COD reach 68% under the optimum condition, and BOD/COD ratio was significantly increased from 0.22 to 0.52. In UV/O3 system, with the increase of O3 dosage, removal efficiency of COD and BOD/COD ratio were increased, and a better performance was obtained than the O3 system alone. Under the optimum condition, removal efficiency of COD was 54%, and BOD/COD ratio was significantly increased from 0.22 to 0.48. In UV/H2O2/O3 system, COD removal efficiency was found to be 22.0% higher than UV/O3 system.     

Biological removal of methanol from process condensate for the purpose of reclamation

The biological removal of methanol from condensate of ammonia manufacturing processes for the purpose of reclamation using contact type reactor was studied. Methanol of 60 mg/L was removed completely under an HRT of 1.12 h. Optimal inorganic nutrient dose was determined on evaluating methanol removal performance and dehydrogenase activities (DHA) under different nutrition doses. The optimal inorganic nutrient dose only gave an increase of conductivity of ca. 10μs/cm^2 in the effluent on treating synthetic condensate containing methanol of 30mg/L. The results demonstrated that biological removal of methanol was effective for the purpose of recovering the methanol-bearing condensate.     

鞍山市双岭水泥厂污染状况调查及环境影响防治对策

通过对鞍山市双岭水泥厂污染源及周边环境的调查监测，搞清污染物的主要来源、厂区周边空气环境的质量，并评价了该厂对周边环境的影响。     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

VOC emission caps constrained by air quality targets based on response surface model: A case study in the Pearl River Delta Region, China

Because of the recent growth in ground-level ozone and increased emission of volatile organic compounds (VOCs), VOC emission control has become a major concern in China. In response, emission caps to control VOC have been stipulated in recent policies, but few of them were constrained by the co-control target of PM_2.5 and ozone, and discussed the factor that influence the emission cap formulation. Herein, we proposed a framework for quantification of VOC emission caps constrained by targets for PM_2.5 and ozone via a new response surface modeling (RSM) technique, achieving 50% computational cost savings of the quantification. In the Pearl River Delta (PRD) region, the VOC emission caps constrained by air quality targets varied greatly with the NO_x emission reduction level. If control measures in the surrounding areas of the PRD region were not considered, there could be two feasible strategies for VOC emission caps to meet air quality targets (160 µg/m³ for the maximum 8-hr-average 90th-percentile (MDA8-90%) ozone and 25 µg/m³ for the annual average of PM_2.5): a moderate VOC emission cap with <20% NOx emission reductions or a notable VOC emission cap with >60% NO_x emission reductions. If the ozone concentration target were reduced to 155 µg/m³, deep NO_x emission reductions is the only feasible ozone control measure in PRD. Optimization of seasonal VOC emission caps based on the Monte Carlo simulation could allow us to gain higher ozone benefits or greater VOC emission reductions. If VOC emissions were further reduced in autumn, MDA8-90% ozone could be lowered by 0.3-1.5 µg/m³, equaling the ozone benefits of 10% VOC emission reduction measures. The method for VOC emission cap quantification and optimization proposed in this study could provide scientific guidance for coordinated control of regional PM_2.5 and O₃ pollution in China.     

鄱阳湖典型河湖交汇区浮游植物现状分析

鄱阳湖典型河湖交汇区（尾闾区）易受人类频繁活动的影响,属于敏感区且是蓝藻水华易暴发区域.为探究鄱阳湖典型河湖交汇区浮游植物群落结构的差异性及相关驱动机制,于2019年至2020年1月（枯水期）、4月（涨水期）、7月（丰水期）和10月（退水期）对鄱阳湖典型河湖交汇区7个采样点位和鄱阳湖河流中段6个采样点位以及主湖区1个采样点位水质状况和浮游植物进行野外调查.结果表明,鄱阳湖典型河湖交汇区浮游植物共有7门64属,浮游植物生物量和相对丰度以硅藻和蓝藻为主.鄱阳湖典型河湖交汇区生物量和丰度东部总体上高于西部,河湖交汇区生物量和丰度高于河流中段.湖区和河湖交汇区蓝藻门优势度较大,河流中段硅藻门优势度较大.蒙特卡罗检验结果显示：总氮（TN）、总磷（TP）、正磷酸盐（PO₄^3--P）、水深（WD）、水温（WT）和透明度（SD）是影响浮游植物群落分布的显著相关环境因子.冗余分析（RDA）结果显示,鄱阳湖西部典型河湖交汇区受水化因子（TN、TP和PO₄^3--P）作用更明显,东部典型河湖交汇区水文因子（WT、WD和SD）影响更为显著.鄱阳湖典型河湖交汇区浮游植物影响因子具有季节性,冬季受水化因子影响较大,夏季受水文因子影响较大.