Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.     

全国大气扩散输送模态与区划研究

基于NCEP再分析气象资料,使用HYSPLIT模式对我国大陆区域进行了一整年的连续轨迹计算.轨迹以1°×1°的网格化经纬度分辨率进行计算.考虑气候、地理及经济因素,将全国计算区域分为10个大区,分别统计各大区出发的轨迹在全国的分布频率.根据全年和各季的轨迹统计结果,分析我国不同区域的大气输送扩散特征以及区域间大气环境的相互影响潜势.结果表明,全国10个大区的大气扩散输送模态可分为特性不同的7大类,其中以西北方向的3个大区为一类,西南高原的2个大区为另一类,其它各区自成一类.10个大区大气扩散物质的累积效应差异显著且季节变化特征各异.全国以西南区(XN)东部大气累积效应最强,东北区(DB)累积效应最弱.     

广州市不同功能区大气二噁英含量和分布特征研究

应用气相色谱-高分辨率质谱仪(GC-HRMS)对广州市秋冬季6个区域环境空气样品中的17种2,3,7,8-氯代二英含量进行了检测.结果表明,广州市各观测区域大气中二英毒性当量浓度范围为0.151～2.230pg.m-3,均值为0.418pg.m-3.各观测区域空气中二英毒性当量浓度分布存在一定的差异,本研究的背景区、居民住宅区和商业区二英毒性当量浓度较低且水平相近,分别为(0.294±0.099)、(0.305±0.115)、(0.308±0.102)pg.m-3.交通枢纽区、郊区和工业区二英毒性当量浓度相对较高,分别为(0.342±0.049)、(0.423±0.113)和(0.838±0.704)pg·m-3.广州市不同功能区二英毒性当量浓度呈现背景区<住宅区<商业区<交通枢纽区<郊区<工业区的分布特点.与2004年相比,广州市城区二英毒性当量浓度有所下降,郊区毒性当量浓度有所上升.     

地质封存中CO_2盐水溶液的表观摩尔体积模型

在现有CO2盐水溶液密度模型的基础上,根据CO2地下盐水溶液密度实验数据,考虑了温度、压力和CO2质量分数三个参数的影响,建立了CO2盐水溶液的表观摩尔体积模型。模型结果表明该模型能在30~50℃、10~20 MPa温压范围内准确预测CO2在盐水溶液中的表观摩尔体积,将预测结果与实验数据进行对比发现最大相对误差为0.25%,平均相对误差为0.1%,模型预测精度明显高于现有的CO2盐水溶液表观摩尔体积模型,为CO2地下盐水层封存提供了必要的基础。     

营养条件对污水中小球藻生长及产能效应的影响

以过滤的富营养化的鱼塘废水为培养液,添加外源的碳、氮、磷元素,考察污水中不同的外源无机碳浓度、总氮浓度、总磷浓度对小球藻(Chlorella vulgaris)的生长、油脂含量和烃类含量的影响。在25℃、光照强度为4 500 Lux、光暗比为12L:12D的条件下培养10 d。单因子方差分析和多重比较结果表明:(1)以Na2CO3做碳源,小球藻生物量和烃类含量在外源无机碳浓度为6 mg/L时最高,油脂含量在外源无机碳浓度为12 mg/L最高。(2)以KNO3做氮源,小球藻生物量在总氮浓度为25 mg/L时最高,油脂含量在总氮浓度为15 mg/L时最高,烃含量在总氮浓度为20 mg/L时最高。(3)以KH2PO4做磷源,小球藻生物量和烃类含量在总磷浓度为2 mg/L时最高,油脂含量在总磷浓度为1.5 mg/L时最高。     

吐纳麝香长期暴露下蚯蚓体内金属硫蛋白和谷胱甘肽变化

吐纳麝香(AHTN)作为人工合成麝香中多环麝香的典型代表,具有挥发性、易生物富集等特性,由于其在环境中的浓度日益升高,呈现出一定的生物效应,可能对生态系统的稳态存在着潜在的威胁,为探讨上述课题,试验通过采用自然土壤法以赤子爱胜蚓(Eiseniafetida)作为试验动物,首次研究测定蚯蚓在AHTN的长期暴露条件下,其体内金属硫蛋白和谷胱甘肽含量的变化。试验结果得出低浓度的AHTN能够抑制机体内金属硫蛋白和谷胱甘肽的生成,使得金属硫蛋白和谷胱甘肽的含量显著减少,在一定浓度范围内的AHTN对机体无明显不利影响,而高浓度的AHTN能够诱导机体内金属硫蛋白和谷胱甘肽的生成,使得金属硫蛋白和谷胱甘肽的含量显著增多(P<0.05),从而对土壤环境存在着潜在的生态风险。     

诱导喷嘴改进滤筒脉冲清灰效果的实验研究

改善清灰效果是提高滤筒除尘效率的关键和难点问题。运用自制脉冲喷吹实验台,采用诱导喷嘴(超音速引流喷嘴和气流散射器)对325 mm×660 mm滤筒进行脉冲喷吹清灰实验研究,并与采用普通喷吹孔的实验结果进行比较分析,得出采用诱导喷嘴时侧壁正压力峰值平均值是普通喷吹孔的1.465倍;且采用诱导喷嘴时各测点的不均衡系数为0.768～1.336,普通喷口为0.270～2.251,而不均衡系数越接近于1,其清灰效果越好;同时,采用诱导喷嘴时各测点基本在同一时刻达到正峰值。实验充分表明采用诱导喷嘴确保了滤筒长度方向上内壁清灰压力的均匀性,且对滤筒清灰效果有明显的改善作用。     

Biological sulfate removal from acrylic fiber manufacturing wastewater using a two-stage UASB reactor

A two-stage UASB reactor was employed to remove sulfate from acrylic fiber manufacturing wastewater. Mesophilic operation (35±0.5℃) was performed with hydraulic retention time (HRT) varied between 28 and 40 hr. Mixed liquor suspended solids (MLSS) in the reactor was maintained about 8000 mg/L. The results indicated that sulfate removal was enhanced with increasing the ratio of COD/SO₄^2-. At low COD/SO₄^2-, the growth of the sulfate-reducing bacteria (SRB) was carbon-limited. The optimal sulfate removal efficiencies were 75% when the HRT was no less than 38 hr. Sulfidogenesis mainly happened in the sulfate-reducing stage, while methanogenesis in the methane-producing stage. Microbes in sulfate-reducing stage performed granulation better than that in methane-producing stage. Higher extracellular polymeric substances (EPS) content in sulfate-reducing stage helped to adhere and connect the flocculent sludge particles together. SRB accounted for about 31% both in sulfate-reducing stage and methane-producing stage at COD/SO₄^2- ratio of 0.5, while it dropped dramatically from 34% in sulfate-reducing stage to 10% in methane-producing stage corresponding to the COD/SO₄^2- ratio of 4.7. SRB and MPA were predominant in sulfate-reducing stage and methane-producing stage respectively.     

纳米铁酸镍的制备及可见光催化性能研究

利用水热法制备了纳米铁酸镍,表征了其微观结构和光谱性能,并以罗丹明B溶液作为目标污染物,研究了铁酸镍催化剂的可见光催化性能。结果表明:所制备铁酸镍的微观形貌为由直径200-300 nm左右的类似球形小颗粒组成的大颗粒,平均粒径为95.60 nm,在紫外-可见光谱区均有较强的光吸收。光催化过程中催化剂的适宜用量为0.05 g,少量H2O2的加入有助于提高罗丹明B溶液的降解率。催化剂用量为0.05 g,加入0.4 mL 30%的H2O2,降解50 mL 20 mg/L罗丹明B溶液,模拟太阳光照射240 min后降解率能够达到99.2%。在实际太阳光照射下,240 min后罗丹明B溶液的降解率可以达到85.2%。     

铁氮掺杂碳纳米管/纤维复合物制备及其催化氧还原的效果

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键因素.通过研究制备成本低廉、氧还原反应(ORR)催化活性高的阴极催化剂来替代Pt/C对于实现MFC规模化应用具有重大意义.研究采用化学气相沉淀法,以三聚氰胺作为碳氮前驱物、以黑珍珠2000或乙炔炭黑作为碳源,外加醋酸亚铁作为铁前驱物,合成了两种铁氮掺杂碳纳米管/纤维复合物(FeNCB和FeNCC),作为MFC的阴极催化剂.通过循环伏安法和旋转圆盘-环电极分析FeNCB、FeNCC和Pt/C的ORR催化活性的差异,并用MFC验证其差异.结果表明,FeNCB性能与Pt/C相当,优于FeNCC,其催化路径是通过4电子途径催化氧还原反应;MFC-FeNCB性能略优于MFC-Pt/C,显著优于MFC-FeNCB有助于MFC的扩大化,其最大功率密度为1 212.8mW·m~(-2),开路电压为0.875 V,电池稳定电压为(0.500±0.025)V.用X射线衍射、X射线光电子光谱、拉曼光谱等进一步分析显示,复合物中碳纳米管管径的大小、铁氮掺杂的类型和含量以及氧含量是引起制备的复合物催化氧还原性能差异的原因所在.