Highly efficient conversion of sugarcane bagasse pretreated with liquid hot water into ethanol at high solid loading

Liquid hot water (LHW), an environmental-friendly physico-chemical treatment, was applied to pretreat the sugarcane bagasse (SCB). Tween80, a non-ionic surfactant, was used to enhance the enzymatic hydrolysis of the pretreated SCB. It found that 0.125 mL Tween80 /g dry matter could make the maximum increase (33.2%) of the glycan conversion of the LHW-pretreated SCB. A self-designed laboratory facility with a plate-and-frame impeller was applied to conduct batch hydrolysis, fed-batch hydrolysis, and the process of high-temperature (50°C) fed-batch hydrolysis following low-temperature (30°C) simultaneous saccharification and fermentation (SSF) which was adopted to overcome the incompatible optimum temperature of saccharification and fermentation in the SSF process. After hydrolyzing LHW-pretreated SCB for 120 h with commercial cellulase, the total sugar concentration and glycan conversion obtained from fed-batch hydrolysis were 91.6 g/L and 68.3%, respectively, which were 9.7 g/L and 7.3% higher than those obtained from batch hydrolysis. With Saccharomyces cerevisiae Y2034 fermenting under the non-sterile condition, the ethanol production and theoretical yield obtained from the process of SSF after fed-batch hydrolysis were 55.4 g/L and 88.3% for 72h, respectively, which were 15.5 g/L and 24.7% higher than those from separate fed-batch hydrolysis and fermentation. The result of this work was superior to the reported results obtained from the LHW-pretreated SCB.     

Stable isotope on the evaluation of water quality in the presence of WWTPs in rivers

Environmental Science and Pollution Research - We investigated the distribution of nitrogen compounds in Han River as well as two tributaries of Tancheon and Jungrangcheon. Particularly, we...     

Potential of fly ash for neutralisation of acid mine drainage

Lignite (PK), bituminous (FI) and biomass (SE) fly ashes (FAs) were mineralogically and geochemically characterised, and their element leachability was studied with batch leaching tests. The potential for acid neutralisation (ANP) was quantified by their buffering capacity, reflecting their potential for neutralisation of acid mine drainage. Quartz was the common mineral in FAs detected by XRD with iron oxide, anhydrite, and magnesioferrite in PK, mullite and lime in FI, and calcite and anorthite in SE. All the FAs had high contents of major elements such as Fe, Si, Al and Ca. The Ca content in SE was six and eight times higher compared to PK and FI, respectively. Sulphur content in PK and SE was one magnitude higher than FI. Iron concentrations were higher in PK. The trace element concentrations varied between the FAs. SE had the highest ANP (corresponding to 275 kg CaCO₃?tonne^?1) which was 15 and 10 times higher than PK and FI, respectively. The concentrations of Ca²⁺, SO₄ ^2?, Na⁺ and Cl^? in the leachates were much higher compared to other elements from all FA samples. Iron, Cu and Hg were not detected in any of the FA leachates because of their mild to strong alkaline nature with pH ranging from 9 to 13. Potassium leached in much higher quantity from SE than from the other ashes. Arsenic, Mn and Ni leached from PK only, while Co and Pb from SE only. The concentrations of Zn were higher in the leachates from SE. The FAs used in this study have strong potential for the neutralisation of AMD due to their alkaline nature. However, on the other hand, FAs must be further investigated, with scaled-up experiments before full-scale application, because they might leach pronounced concentrations of elements of concern with decreasing pH while neutralising AMD.     

Vehicle emission implications of drivers’ smart advisory system for traffic operations in work zones

Wireless communication systems have been broadly applied in various complicated traffic operations to improve mobility and safety on roads, which may raise a concern about the implication of the new technology on vehicle emissions. This paper explores how the wireless communication systems improve drivers’ driving behaviors and its contributions to the emission reduction, in terms of Operating Mode (OpMode) IDs distribution used in emission estimation. A simulated work zone with completed traffic operation was selected as a test bed. Sixty subjects were recruited for the tests, whose demographic distribution was based on the Census data in Houston, Texas. A scene of a pedestrian’s crossing in the work zone was designed for the driving test. Meanwhile, a wireless communication system called Drivers Smart Advisory System (DSAS) was proposed and introduced in the driving simulation, which provided drivers with warning messages in the work zone. Two scenarios were designed for a leading vehicle as well as for a following vehicle driving through the work zone, which included a base test without any wireless communication systems, and a driving test with the trigger of the DSAS. Subjects’ driving behaviors in the simulation were recorded to evaluate safety and estimate the vehicle emission using the Environmental Protection Agency (EPA) released emission model MOVES. The correlation between drivers’ driving behavior and the distribution of the OpMode ID during each scenario was investigated. Results show that the DSAS was able to induce drivers to accelerate smoothly, keep longer headway distance and stop earlier for a hazardous situation in the work zone, which driving behaviors result in statistically significant reduction in vehicle emissions for almost all studied air pollutants (p-values range from 4.10E-51 to 2.18E-03). The emission reduction was achieved by the switching the distribution of the OpMode IDs from higher emission zones to lower emission zones.

Implications: Transportation section is a significant source of greenhouse gas emissions. Many studies demonstrate that the wireless communication system dedicated for safety and mobility issues may contribute to the induction in vehicle emissions through changing driving behaviors. An insight into the correlation between the driving behaviors and the distribution of Operating Mode (OpMode) IDs is essential to enhance the emission reduction. The result of this study shows that with a Drivers Smart Advisory System (DSAS) drivers accelerated smoothly and stopped earlier for a hazardous situation, which induce the switch of the OpMode IDs from high emission zones to lower emission zones.     

Rebound effect and its decomposition – an analysis based on energy types in China

Rebound effect derived from energy efficiency improvement has been widely invested. However, most of studies focus on the rebound effect of the energy composite level and neither distinguish nor compare different energy types. We compare the differences in energy saving and energy rebound between primary and secondary energy sources, and further decompose the rebound effect into production rebound part and final demand component. To do so, we add a module for rebound into a comparative state China-CGE model. We design and test two simulation scenarios using the model. In Scenario 1, all production sectors’ energy efficiency of using primary energy increases by 5%. In Scenario 2, all production sectors’ energy efficiency of using secondary energy increases by 5%. The results show that Scenario 2 leads to more GDP growth and more energy saving. Our scenarios show rebound effects range between 9.6% and 27.9%, and in general are higher when energy efficiency of using primary energy sources is improved. Our decomposition analysis shows that improving energy efficiency in production sectors would stimulates energy use of final demand. Indeed, the consumption side has significant contribution to rebound in secondary energy use, especially in crude oil and gas. This study reveals that improving efficiency of using secondary energy is better than improving that of primary energy, both in terms of economic impact and energy rebound. And complementary policies that prevent energy services prices from falling too much can be adopted to reduce rebound. Controlling residential energy use could also be effective in reducing rebound, this has particular implication to economies in which residential energy consumption are far from saturation.     

川南山地林分变化对土壤物理性质和抗蚀性的影响

以川南天然林(TRL)及其转变成的毛竹林(MZL)、檫木林(CML)、柳杉林(LSL)、杉木林(SML)和水杉林(SSL)为对象,研究不同林分土壤物理性质和抗蚀性差异,以主成分分析法(ZCFM)和隶属函数法(LSHM)分别计算的土壤抗蚀性综合值Ⅰ(KSX-Ⅰ)和Ⅱ(KSX-Ⅱ)评价林分变化对土壤抗蚀性的影响,探索简便易行的土壤抗蚀性综合评价方法。结果表明,天然林转变为人工林后土壤物理性质和抗蚀性变差,呈现出有机质和0.25 mm水稳性团聚体含量、水稳性团聚体平均重量直径、团聚度、孔隙度及物理稳定性指数降低,而结构体破坏率、不稳定团粒指数、容重、分散率及侵蚀系数增加。各林分土壤KSX-Ⅰ和KSX-Ⅱ均呈现出TRLCMLSSLLSLMZLSML的规律变化。土壤抗蚀性指标间相关性均达到显著(p0.05)水平;土壤KSX-Ⅰ和KSX-Ⅱ之间呈显著相关关系(p0.05),且两者均与各抗蚀性指标间呈显著相关(p0.05)。说明天然林植被变化后会使土壤抗蚀性降低,影响原有植被水土保持功能,应该加强天然林及其生态功能保护;ZCFM和LSHM均可作为计算土壤抗蚀性综合值的有效方法,但考虑到计算过程的难易度,后者更简便易行。结果为土壤抗蚀性综合评价新方法的建立提供了参考。     

基于铁路客运的中国城市可达性及类型研究

为探究铁路网络时空压缩效应对城市可达性的影响,基于2009年和2014年铁路列车时刻表数据,结合传统数理统计方法及空间分析方法,对中国地级以上城市可达性及其格局演变进行深入分析。结果表明:(1)铁路客运的数量和类型上均有较大变化,特别是始发列车及动车组的大幅增加及高铁的开通运行,中国城市可达性得到一定程度提升,但城市可达性改善地域差异性显著。(2)北上广三大核心城市在城市可达性等级体系中第一层级地位稳固,交通区位条件的差异使得城市可达性等级体系产生一定变化。(3)中国城市可达性绝对及相对差距均呈现出不断扩大趋势,列车停靠数量的极化效应显著、新增加的高速客运更多地向高等级中心城市集聚,铁路基础设施的建设正在重塑中国生产力格局。(4)从城市功能属性及规模属性视角,以始发列车和停靠列车中位数为临界值,将中国城市划分为高规模高功能、高规模低功能、低规模高功能、低规模低功能等4种类型,并依次分析城市分布特征及成因,为铁路客运的合理配置及交通网络优化布局提供参考。     

TRMM 3B42卫星降水数据在赣江流域径流模拟中的应用

以赣江流域为研究区,基于观测降水和TRMM准实时数据(3B42RTV6、3B42RTV7)和分析数据(3B42V6、3B42V7),驱动VIC水文模型,开展卫星降水产品在赣江流域的水文模拟,评估TRMM降水产品在水文模拟中的应用能力。结果表明:(1)在赣江流域,3B42V7估算的降水与实测降水的对比结果最好,3B42RTV6的估算精度最低,3B42RTV7较3B42RTV6在赣江流域的降水估算精度提升非常明显;(2)在径流模拟方面,3B42V6和3B42V7在日尺度上尽管对洪峰的模拟有所偏差,但模拟结果仍能反映径流变化特征,在月尺度上模拟结果精度较高,纳什系数均在0.9以上,并且二者在4、5月的径流模拟结果较好,7、8月的模拟结果较差,而3B42RTV6对径流的模拟能力较差,日径流量和月径流量均呈现明显低估,3B42RTV7对径流的模拟结果比3B42RTV6有明显改善,可以满足实时水文预报的需求。