Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]     

Toxic effects of wastewater from various phases of monosodium glutamate production on seed germination and root elongation of crops

To make a comprehensive assessment on monosodium glutamate (MSG) wastewater pollution, a pollution exposure experiment was carried out on the seed germination and root elongation of wheat, Chinese cabbage and tomato by using the wastewater discharged from different processing phases of MSG production. The results showed that there were significantly positive linear relationships between the inhibitory rates of wheat seed germination and root elongation and the COD_cr of the mother liquor scraps. The toxicity of MSG wastewater to the test crops was in the order of tomato > Chinese cabbage > wheat, indicating that tomato was the most sensitive to the wastewater, and could be considered as an ideal toxic bioindicator. The half-effect concentrations (IC₅₀) based on the seed germination and root elongation of the test crops exposed to the wastewater discharged from various processing phases of MSG production was 22.0–32 432 and 17.3–3320 mg/L, respectively. Translated from Chinese Journal of Applied Ecology, 2006, 17(7): 1286–1290 [译自: 应用生态学报]     

基于元数据的南宁市环境信息共享模式分析

元数据技术是目前环境信息管理的发展趋势，对基于元数据的南宁市环境信息共享模式进行了探索与研究，提出了元数据系统功能及内容框架的解决方案。     

STC脉冲喷吹袋式除尘器在机立窑烟气除尘脱硫中的应用

介绍了STC脉冲喷吹袋式除尘器的自动控温、外滤除尘、自控离线脉冲喷吹清灰的工作原理和特点 ,监测数据说明该除尘器成功解决了机立窑消烟、除尘和脱硫问题     

一种超声速气体冲击射流噪声的屏蔽抑制方法

根据对冲击射流离散频率噪声产生的反馈机理的认识，提出了一种能够有效地破坏反馈环的形成，从而抑制冲击射流离散频率噪声的喷嘴屏蔽方法。这种方法是通过阻隔反馈声波使其不能到达喷嘴唇口、同时屏蔽物不与射流接触来实现降噪的目的，实验结果表明，对于合适的屏蔽罩参数，正常降噪效果达5dB以上。分析表明这种降噪方法对射流冲击平板的推力和除尘除水效率的提高有帮助。     

生物硝化池污水中硝化细菌的快速定量研究

实验采用聚合酶链式反应（PCR）技术与最大几率数法（MPN）相结合的MPN－PCR法对生物硝化池污水中的硝化细菌进行快速定量。所用的一对PCR引物是在对硝化细菌的16SrRNA基因进行系统比较的基础上设计合成的，可以扩增出大小为388bp的DNA片段。以从生物硝化池污水中抽提的含硝化细菌DNA的混合DNA为模板，进行PCR扩增并确定合适的扩增条件。运用MPN－PCR法进行定量检测的整个过程可在几小时之内完成。     

铸态珠光体基体球墨铸铁 S195曲轴的研制

针对生产实际要求,研究了微量元素加入量、开箱时间等对铸态球墨铸铁珠光体量及性能的影响,试验了铸态球墨铸铁曲轴的各种常规性能.     

半球形件粘性介质压力成形的数值模拟研究

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。对双面施放粘性介质的板材胀形进行了模拟研究 ,在双面施放介质的板材粘性介质胀形时 ,排放孔位置分布对毛坯成形过程有明显的影响。排放孔位置分布的不同造成模腔内介质的速度场不同 ,进而导致板材不同部位的流动速度的方向大小发生变化 ,最终使成形件的厚度分布不同     

中国产品生命周期影响评价方法研究

讨论了确定中国产品生命周期影响评价所需的标准化基准和权重的确定方法和程序，包括产品系统环境影响潜值计算，数据标准化，加权评估 以及计算环境影响负荷和资源耗竭系数4个步骤。标准化基准采用1990年中国人均环境影响总潜值来表达，而权重采用1990年的基准与2000年中国政府的削减目标所估算的基准之间的比值计算。     

电解制备聚合铝过程中Alb形态生成条件研究

考察了电解法制备聚合铝过程中AIb的最佳形成条件。AIb的形成与电流密度、极板间距、电解液的温度、铝的浓度以及电解时间等因素有关。在制备AI浓度为2．0mol/L的聚合氯化铝时，最佳的电流密度和极板间距分别为1．1A／dm^2和10mm。由于电化学过程中产生的不均匀的界面pH差值较大而生成较多的AI（OH）4^-作为AIb结构的结晶核心，因此能形成更多的AIb聚合形态。