Responses of nitrification performance, triclosan resistome and diversity of microbes to continuous triclosan stress in activated sludge system

Triclosan(TCS) is commonly found in wastewater treatment plants,which often affects biological treatment processes.The responses of nitrification,antibiotic resistome and microbial community under different TCS concentrations in activated sludge system were evaluated in this study.The experiment was conducted in a sequencing batch reactor(SBR)for 240 days.Quantitative PCR results demonstrated that the abundance of ammonium oxidizing bacteria could be temporarily inhibited by 1 mg/L TCS and then gradually recovered.And the abundances of nitrite oxidizing bacteria(NOB) under 2.5 and 4 mg/L TCS were three orders of magnitude lower than that of seed sludge,which accounted for partial nitrification.When the addition of TCS was stopped,the abundance of NOB increased.The mass balance experiments of TCS demonstrated that the primary removal pathway of TCS changed from adsorption to biodegradation as TCS was continuously added into the SBR system.Moreover,TCS increased the abundance of mexB,indicating the efflux pump might be the main TCS-resistance mechanism.As a response to TCS,bacteria could secrete more protein(PN) than polysaccharide.Three-dimensional excitation-emission matrix revealed that tryptophan PN-like substances might be the main component in PN to resist TCS.High-throughput sequencing found that the relative abundances of Paracoccus,Pseudoxanthomonas and Thauera increased,which could secrete extracellular polymeric substances(EPS).And Sphingopyxis might be the main TCS-degrading bacteria.Overall,TCS could cause partial nitrification and increase the relative abundances of EPS-secreting bacteria and TCS-degrading bacteria.     

Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

日本城市有机废弃物甲烷发酵资源化系统案例分析及最新研究进展

为建设可持续发展社会,日本近年来大力推动甲烷发酵以实现城市有机废弃物的减量化和资源化。首先介绍了日本城市有机废弃物资源化的2个实用案例,长冈市厨余垃圾沼气发电中心和丰桥市生物质资源利用中心的设计和运营状况。两者的长期稳定运行及产能效果验证了甲烷发酵技术在城市有机废弃物减量化和资源化上的可行性。其次,为了应对社会发展趋势和城市有机废弃物处理的技术需求,介绍了日本有关厨余垃圾、污泥以及废纸（城市有机废弃物的3大组分）的单独发酵及共发酵的部分研究成果。此外,简要介绍了应用厌氧膜生物反应器（AnMBR）进行相关高效甲烷发酵的最新研究成果。并根据实用案例调查和实验研究结果,以100万人口城市为例,对城市有机废弃物的各种甲烷发酵系统的产能效果进行了模拟概算。     

基于土壤重金属特征的绿色食品产地环境评价——以重庆(江津)现代农业园区为例

以重庆市江津区现代农业园区内4种农用地类型的653个表层土样为研究对象,测定土壤重金属元素含量.依据绿色食品产地环境相关标准,采用重金属污染指数法对标准中所涉及的Cu、Cr、Cd、Hg、As和Pb共6种重金属元素开展土壤环境质量评价和潜在生态风险评价,并结合用地类型确定绿色农产品生产的适宜性土壤分区.结果表明：除元素Cu、Cr和As外,其他元素的平均含量均高于重庆市土壤背景值;除元素As和Hg外,其他元素的平均含量均高于我国土壤背景值.土壤重金属元素Cu、Cr、Cd、Hg、As和Pb的平均浓度均达到《绿色食品产地环境质量》标准要求,但Cd污染已处于安全警戒线内,应高度警惕和严格监管园区内该元素的污染.水田、旱地和果园的土壤环境均以尚清洁为主,其他园地的土壤环境以轻度污染水平为主.部分水田存在一定程度的Pb污染（轻度）、Hg污染（中度）和Cd污染（中度）,旱地存在一定程度的Hg污染（中度）和Cd污染（中度）,果园和其他园地的土壤存在一定程度的Cd的轻、中度污染.全区符合《绿色食品产地环境质量》标准要求的土壤面积为12.47km²,占农用地总面积的63.64%,旱地、果园、水田和其他园地中符合该标准的面积分别占各自总面积的84.83%、68.07%、56.51%和42.09%.4种用地类型的土壤环境生态风险水平均以低等为主,共占研究区总面积的74.70%.Cd和Hg在园区表层土壤重金属生态风险评估中占有较大的贡献率,应列为优先控制污染元素并对其生态效应开展进一步研究.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.     

沈阳市郊区环境空气中醛酮类化合物的污染特征与来源分析

为探究沈阳市郊区环境空气中醛酮类化合物的污染特征,于2017年8月24日—9月2日采用2,4-二硝基苯肼固相吸附/高效液相色谱方法对沈阳市郊区醛酮类化合物进行观测分析,利用美国环境保护局推荐的人体健康风险评价方法对部分有毒有害醛酮类化合物的人体健康风险进行了评价,并利用比值法对醛酮类化合物的来源进行了初步分析.结果表明:醛酮类化合物质量浓度日均值范围为23.16~38.38 μg/m3;质量浓度最高的4种醛酮类化合物依次是丙酮、甲醛、正丁醛和乙醛,其质量浓度日均值的平均值分别为8.71、5.90、5.48和2.95 μg/m3.对·OH消耗速率(L_OH)贡献较大的醛酮类化合物物种是正丁醛、甲醛和乙醛,臭氧生成潜势贡献(OFP)较大的醛酮类化合物物种是甲醛、正丁醛和乙醛,在研究区影响醛酮类化合物光化学反应活性的物种主要是甲醛、乙醛和正丁醛.研究区观测期间,环境空气中甲醛和乙醛的致癌性风险值分别为1.18×10-5和5.91×10-6,对暴露人群存在潜在的致癌风险;乙醛的非致癌风险值为0.05,对暴露人群不存在非致癌风险.在研究区的一次臭氧轻度污染过程期间,环境空气中的甲醛和乙醛受天然源排放的挥发性有机物二次转化的影响减弱,甲醛、乙醛和丙酮受到炼焦工业和机动车等人为源排放的影响增强,而正丁醛主要受当地精细化工产业排放的影响.研究显示,沈阳市应加大对炼焦工业、精细化工和机动车来源排放醛酮类化合物的管制,以降低环境空气中活性醛酮类化合物及有毒有害醛酮类化合物的浓度.