含阶梯结构的高层楼梯井内烟气湍流及输运特征量的全局敏感性分析

高层建筑竖井火灾中影响因素众多,并且各因素对高层楼梯井火灾中重要现象、关键数值等的影响大小不一,使得此类火灾中的实验或理论研究成本较高。通过建立全局敏感性分析平台,定量考察了高层楼梯井结构所涉及因素的影响大小,并能够方便地筛选掉对所考察量影响较小的因素,以降低实验或计算成本。使用数值模拟方法,通过CFD软件对包含阶梯几何框架的高层楼梯井结构火灾进行了共计60次工况计算。并且根据计算结果,使用全局参数敏感性分析方法,得出建筑尺寸、热释放速率、环境参数对高层楼梯井内烟气湍流特性及输运特性的敏感性排序。结果表明,火源热释放速率对各输出参数的影响均占38%以上。     

Development of the Metropolitan Water Availability Index (MWAI) and short-term assessment with multi-scale remote sensing technologies

Global climate change will influence environmental conditions including temperature, surface radiation, soil moisture, and sea level, and it will also significantly impact regional-scale hydrologic processes such as evapotranspiration (ET), precipitation, runoff, and snowmelt. The quantity and quality of water available for drinking and other domestic usage is also likely to be affected by changes in these processes. Consequently, it is necessary to assess and reflect upon the challenges ahead for water infrastructure and the general public in metropolitan regions. One approach to the problem is to use index-based assessment, forecasting and planning. The drought indices previously developed were not developed for domestic water supplies, and thus are insufficient for the purpose of such an assessment. This paper aims to propose and develop a “Metropolitan Water Availability Index (MWAI)” to assess the status of both the quantity and quality of available potable water sources diverted from the hydrologic cycle in a metropolitan region. In this approach, the accessible water may be expressed as volume per month or week (i.e., m³/month or m³/week) relative to a prescribed historical record, and such a trend analysis may result in final MWAI values ranging from ?1 to +1 for regional water management decision making. The MWAI computation uses data and information from both historical point measurements and spatial remote-sensing based monitoring. Variables such as precipitation, river discharge, and water quality changes at drinking water plant intakes at specific locations are past “point” measurements in MWAI calculations. On the other hand, remote sensing provides information on both spatial and temporal distributions of key variables. Examples of remote-sensing images and sensor network technologies are in-situ sensor networks, ground-based radar, air-borne aircraft, and even space-borne satellites. A case study in Tampa Bay, Florida is described to demonstrate the short-term assessment of the MWAI concept at a practical level. It is anticipated that such a forecasting methodology may be extended for middle-term and long-term water supply assessment.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Engineered nanoparticles in wastewater and wastewater sludge – Evidence and impacts

Nanotechnology has widespread application in agricultural, environmental and industrial sectors ranging from fabrication of molecular assemblies to microbial array chips. Despite the booming application of nanotechnology, there have been serious implications which are coming into light in the recent years within different environmental compartments, namely air, water and soil and its likely impact on the human health. Health and environmental effects of common metals and materials are well-known, however, when the metals and materials take the form of nanoparticles – consequential hazards based on shape and size are yet to be explored. The nanoparticles released from different nanomaterials used in our household and industrial commodities find their way through waste disposal routes into the wastewater treatment facilities and end up in wastewater sludge. Further escape of these nanoparticles into the effluent will contaminate the aquatic and soil environment. Hence, an understanding of the presence, behavior and impact of these nanoparticles in wastewater and wastewater sludge is necessary and timely. Despite the lack of sufficient literature, the present review attempts to link various compartmentalization aspects of the nanoparticles, their physical properties and toxicity in wastewater and wastewater sludge through simile drawn from other environmental streams.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Capability of cation exchange technology to remove proven N-nitrosodimethylamine precursors

N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.     

建筑材料隐含环境影响评估

我国建筑业快速发展,建筑开发使用大量的建筑材料给资源和环境带来严重负荷.以上海市为案例,运用生命周期评价方法,基于北京工业大学和Ecoinvent数据库中的建筑材料生产数据,采用ReCiPe法对上海市建筑物的材料隐含环境影响进行评估,并对未来的环境影响潜值进行预测.结果表明:在上海市居住建筑和非居住建筑所产生的各类环境影响中人类毒性、金属损耗最为突出,约占总环境影响的45%和20%;环境影响主要来源于钢筋和木材的生产,对各类环境影响贡献度分别约为47%、17%;高层居住建筑和非居住建筑中的工厂建筑物化环境影响在各自类型中所占比例最高.按现有趋势发展,2020年上海市居住建筑开发规模和环境影响潜值均将达到2014年的1.52倍,非居住建筑则可达到2014年的1.14倍.针对上海市建筑材料环境影响分析结果,为有效减轻上海市建筑物的环境影响,需重点关注钢筋、铝材、木材以及混凝土的生产,识别生产过程中污染物转移环节进而改进工序;在设计阶段考虑选择环境影响负荷低的绿色建材,如混凝土砌块、高性能混凝土等,从而降低环境影响;同时,应重点关注隐含环境负荷高的高层居住和工厂建筑类建筑,通过降低建材使用量等方案降低环境影响.      

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

大连重要海水增养殖区粪便污染指示菌和弧菌的时空分布

开展海水增养殖区卫生安全评价对于减少人体健康风险、提高增养殖区的有效管理尤为重要。本研究于2013年3月、5月、8月和10月对大连市金石滩、大长山岛、大李家3个重要海水增养殖区的贝类和海水进行了粪便污染指示菌总大肠菌群（TC）和粪大肠菌群（FC）的监测,同时监测了弧菌总数（TV）和主要环境要素（包括水温、pH、盐度、COD、DO、Chl a）。结果表明:这3个海区贝类组织中TC及海水中的TC、FC浓度均呈显著的时间和空间分布变化。贝类组织中TC含量随时间的分布趋势为:8月> 5月> 3月> 10月,空间分布为:大长山岛>金石滩,大长山岛>大李家,而金石滩和大李家差异不显著（P < 0.05）;海水中TC和FC浓度分布特征相似,时间分布特征均为:金石滩8月份最高,大李家5月份最高,而大长山岛各月份均低于最低检测限（2 MPN/100 mL）,空间分布特征均为:大李家增养殖区污染较为严重,而金石滩和大长山岛差异不显著（P < 0.05）。3个增养殖区8月份和10月份的海水中TV浓度较高,为3.3×102~4.23×105 CFU/100 mL。通过分析不同季节海水增养殖区中TC、FC、TV之间及其与水温、pH、盐度、COD、DO、Chl a的相关性,表明环境要素以及增养殖区水域特点对于粪便污染指示菌和弧菌的时空分布具有重要的影响。为更好地反映增养殖区的卫生安全状况,海水和养殖生物体内指示生物应同时监测,在监测传统粪便污染指示菌的同时,建议将弧菌作为重要的病原菌指标。