掺Fe金红石TiO2的制备及其可见光催化活性的评价研究

为提高金红石型TiO2的可见光吸收性能和光催化活性,以FeC2O4为Fe源,用浸渍法制备了掺铁金红石TiO2光催化剂。采用XRD、UV-Vis等手段对催化剂进行表征;以阿特拉津为目标污染物,在Vis/H2O2条件下对其催化活性进行了评估。结果表明,Fe以Fe2O3的形式负载在金红石型TiO2的表面;掺铁后金红石型TiO2显著拓宽了其可见光的吸收范围;煅烧温度为400℃时制得的光催化剂Fe-R-400℃的粒径结构和光催化活性最好。以Fe质量分数为1%的Fe-R-400℃作为光催化剂,控制反应体系的初始pH=3,催化剂投加质量浓度为1 g/L,H2O2初始浓度为1 mmol/L,经可见光照射反应15 min后,对初始质量浓度为10 mg/L的阿特拉津的去除率可达95.7%。催化剂循环试验表明,Fe在金红石TiO2表面负载比较牢固,催化剂具有较好的稳定性和重复使用性能。     

High mineral adsorption of glyphosate versus diethyl phthalate and tetracycline,during visible light photodegradation with goethite and oxalate

Environmental Chemistry Letters - The increasing presence of pesticides, pharmaceuticals and plasticizers in environmental media is threatening public health and ecosystems. Remediation of...     

聚硅氧烷包膜对磁黄铁矿尾矿重金属溶出的影响

通过用不同pH的3%双氧水分别浸泡原始尾矿和聚硅氧烷包膜处理尾矿,研究了包膜剂浓度,浸泡时间,浸泡介质pH对尾矿中重金属溶出的影响,并利用红外光谱法对改性前后的尾矿进行表征.结果表明选择包膜剂浓度为10%-15%时效果最佳;在3%的双氧水中浸泡1周的时间内,包膜剂对尾矿中重金属离子的溶出都有较大影响,抑制Cr、Mn、C...     

Diurnal trends in coarse particulate matter composition in the Los Angeles Basin

To investigate the diurnal profile of the concentration and composition of ambient coarse particles, three sampling sites were set up in the Los Angeles Basin to collect coarse particulate matter (CPM) in four different time periods of the day (morning, midday, afternoon and overnight) in summer and winter. The samples were analyzed for total and water-soluble elements, inorganic ions and water-soluble organic carbon (WSOC). In summer, highest concentrations of CPM gravimetric mass, mineral and road dust, and WSOC were observed in midday and afternoon, when the prevailing onshore wind was stronger. In general, atmospheric dilution was lower in winter, contributing to the accumulation of air pollutants during stagnation conditions. Turbulences induced by traffic become a significant particle re-suspension mechanism, particularly during winter night time, when mixing height was lowest. This is evident by the high levels of CPM mass, mineral and road dust in winter overnight at the near-freeway sites located in urban Los Angeles, and to a lesser extent in Riverside. WSOC levels were higher in summer, with a similar diurnal profile with mineral and road dust, indicating that they either share common sources, or that WSOC may be adsorbed or absorbed onto the surfaces of these dust particles. In general, the contribution of inorganic ions to CPM mass was greater in the overnight sampling period at all sampling sites, suggesting that the prevailing meteorological conditions (lower temperature and higher relative humidity) favor the formation of these ions in the coarse mode. Nitrate, the most abundant CPM-bound inorganic species in this basin, is found to be predominantly formed by reactions with sea salt particles in summer. When the sea salt concentrations were low, the reaction with mineral dust particles and the condensation of ammonium nitrate on CPM surfaces also contributes to the formation of nitrate in the coarse mode.     

基于LabVIEW的微震实时监测系统

基于LabVIEW软件平台,利用虚拟仪器优势,自主研发了一套用于矿山的微震实时监测系统.介绍了该系统的功能和用途.一段时间现场监测的结果表明,该系统能很好地完成微震实时监测,分析并精确定位微震事件的时间与空间.     

基于缓和原则的粉尘爆炸风险控制研究

为了将本质安全原理中的缓和原则与粉尘爆炸事故的风险控制联系起来,利用Swiek20 L球形爆炸装置考察了烟煤粉、甘薯粉和镁粉的最大爆炸压力、最大爆压上升速率和爆炸下限等特性,重点考察了点火能量、环境压力以及添加惰化剂等因素的影响。结果表明:降低点火能量能有效缩减粉尘可燃浓度范围,提高粉尘爆炸下限;爆炸危害正相关于环境压力;碳酸钙和碳酸氢钠能有效抑制烟煤尘爆炸,且碳酸钙抑爆效果更好;氯化钾对镁尘爆炸动力学特性的抑制效果更好,而碳酸钙对镁尘爆炸热力学特性的抑制效果更好,且小粒径的惰化剂表现出更好的抑爆炸能力。降低点火能量、控制环境压力和添加惰化剂均可降低粉尘爆炸危害,有助于控制粉尘爆炸风险。     

锰氧化物负载施氏矿物去除酸性矿山废水中As(III)的性能及机理

施氏矿物是天然的砷吸附剂,但其存在酸性条件下对As(III)吸附性能较弱且无法对As(III)氧化降毒的缺陷. 采用液相沉淀法成功制备出锰氧化物负载施氏矿物(MnO_x@Sch),研究锰负载量、初始pH值和共存离子对MnO_x@Sch去除As(III)的影响,并采用吸附动力学结合XPS、FTIR及TEM等表征探究该过程的机理. 结果表明:在初始pH=3、投加量为0.5 g·L^-1、As(III)初始浓度为1 mg·L^-1的条件下,As(III)与MnO_x@Sch反应后的剩余浓度仅为2.42~3.38 μg·L^-1.MnO_x@Sch去除As(III)受初始pH影响较小,H₂PO₄^-共存时As(III)去除存在明显的抑制作用. MnO_x@Sch 去除As(III)的过程符合准二级动力学方程和颗粒内扩散方程. 液相化学组分和固相产物表征分析显示MnO_x@Sch对As(III)的去除机理可概括为As(III)氧化、静电吸附和络合配位及配体交换. 研究结果可为施氏矿物及其改性材料应用于酸性矿山废水砷污染治理提供理论依据.     

载铁ACF/Ni阴极电化学体系除藻效能与机制

采用化学浸渍法将Fe@Fe₂O₃纳米线负载在活性炭纤维/泡沫镍上组成Fe@Fe₂O₃/ACF/Ni复合阴极,以钛基铂（Pt/Ti）为阳极,考察载铁量、初始pH值和不同电化学体系对除藻效果的影响,探究无供氧条件下Pt/Ti-Fe@Fe₂O₃/ACF/Ni电化学体系除藻的效能;基于·OH间接检测、铁离子浓度、H₂O₂浓度及pH值的分析和·O₂^-的检测研究Pt/Ti-Fe@Fe₂O₃/ACF/Ni中性电化学体系反应机制.结果表明,当制备阴极阶段投加0.03g FeCl₃×6H₂O,初始藻浓度为0.7×10⁹~0.8×10⁹个/L,电流密度为75mA/cm²,初始pH6.2时,电解60min,该体系除藻率可达到92.3%.在Pt/Ti-Fe@Fe₂O₃/ACF/Ni电化学体系中,Fe@Fe₂O₃/ACF/Ni阴极可通过电化学反应产生大量·OH和·O₂^-,使藻细胞破裂死亡;该体系除藻的主要机理是非均相电Fenton反应.