Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

The residual algal-bacterial biomass from photosynthetically supported, organic pollutant biodegradation processes, in enclosed photobioreactors, was tested for its ability to accumulate Cu(II), Ni(II), Cd(II), and Zn(II). Salicylate was chosen as a model contaminant. The algal-bacterial biomass combined the high adsorption capacity of microalgae with the low cost of the residual biomass, which makes it an attractive biosorbent for environmental applications. Cu(II) was preferentially taken-up from the medium when the metals were present both separately and in combination. There was no observed competition for adsorption sites, which suggested that Cu(II), Ni(II), Cd(II), and Zn(II) bind to different sites and that active Ni(II), Cd(II) and Zn(II) binding groups were present at very low concentrations. Therefore, special focus was given to Cu(II) biosorption. Cu(II) biosorption by the algal-bacterial biomass was characterized by an initial fast cell surface adsorption followed by a slower metabolically driven uptake. pH, Cu(II), and algal-bacterial concentration significantly affected the biosorption capacity for Cu(II). Maximum Cu(II) adsorption capacities of 8.5+/-0.4 mg g-1 were achieved at an initial Cu(II) concentration of 20 mg l-1 and at pH 5 for the tested algal-bacterial biomass. These are consistent with values reported for other microbial sorbents under similar conditions. The desorption of Cu(II) from saturated biomass was feasible by elution with a 0.0125 M HCl solution. Simultaneous Cu(II) and salicylate removal in a continuous stirred tank photobioreactor was not feasible due to the high toxicity of Cu(II) towards the microbial culture. The introduction of an adsorption column, packed with the algal-bacterial biomass, prior to the photobioreactor reduced Cu(II) concentration, thereby allowing the subsequent salicylate biodegradation in the photobioreactor.     

北京市危险化学品安全生产技术支撑体系建设

1引言 近年来,在北京市委、市政府的领导下,各职能部门的协同努力下,北京市危险化学品安全生产工作取得了显著成绩,制定了一系列危险化学品安全生产管理规范,开展了危险化学品从业单位安全质量标准化活动,进一步提高了从业单位的安全生产管理水平,我市危险化学品安全生产状况总体趋向好转.     

隧道施工地质灾害分析与防治对策

根据隧道施工地质灾害成因与特性,对隧道施工地质灾害进行分类,并对其特点进行分析,提出隧道施工地质灾害防治原则。在建立隧道施工地质灾害监测与预警系统的基础上,对常见灾害中的塌方、涌水、突泥、瓦斯爆炸、岩爆等现象提出防治措施,旨在为隧道安全施工提供参考。     

青藏工程走廊道路工程阴阳坡效应研究现状及展望

青藏工程走廊整体呈东北-西南走向,加之青藏高原强烈的太阳辐射及大气透明度高,导致廊内路基工程存在显著的"阴阳坡"效应。在阴阳坡热效应作用下,路基阳坡路肩沉降变形普遍大于阴坡路肩,由此引发包括路基倾斜、边坡滑塌、纵向裂缝等一系列路基路面病害问题,严重影响了路基工程的长期稳定性,大幅增加了工程后期运营维护成本。针对这一问题,从青藏工程走廊阴阳坡效应的成因、阴阳坡效应作用下路基体冻融过程及地基温度场分布、路基的横向差异沉降变形、阴阳坡效应相关路基路面病害以及防控措施5个方面系统论述了目前的研究和工程实践现状,并结合阴阳坡效应的量化研究、防治措施的有效性等方面就未来需要开展的研究工作进行了展望,以期为青藏工程走廊内路基工程的建设与维护提供参考。     

Treatment of fluoride-contaminated water. A review

Environmental Chemistry Letters - Delivering the right amount of fluoride to drinking water protects the teeth from decay and reduces the risk of cavities. Nonetheless, fluorosis has been...     

Do trace metal(loid)s in road soils pose health risks to tourists? A case of a highly-visited national park in China

Nowadays, more people tend to spend their recreational time in large national parks, and trace metal(loid)s in soils have attracted long-term attention due to their possible harm to human health. To investigate the pollution levels, potential sources and health risks of trace metal(loid)s in road soils, a total of eight trace metal(loid)s (including As, Cd, Cr, Cu, Ni, Pb, Zn and Hg) from 47 soil samples along roads were studied in the Huangshan National Park in Southeast China. The results showed that the concentrations of As, Cd, Pb, Zn and Hg appeared different degrees of pollution compared with their corresponding background values. According to the pollution indices, Hg and Cd were recognized as significant pollutants presenting moderate to high ecological risk. Combining principal component analysis and positive matrix factorization model, the results showed that traffic, industrial, agricultural and natural sources were the potential origins of trace metal(loid)s in this area, with contribution rates of 39.93%, 25.92%, 10.53% and 23.62%, respectively. Non-carcinogenic risks were all negligible, while the carcinogenic risk of As was higher than the limit (1 $\times$ 10⁻⁶). Moreover, children were more susceptible to trace metal(loid)s by ingestion which appeared to be a more important exposure pathway than dermal contact and inhalation. The contribution rates of different sources to non-carcinogenic risks and carcinogenic risks were similar among children and adults, while traffic and industrial sources have a significant impact on health risks. This study will give more insights to control the environmental risks of trace metal(loid)s in national parks.     

水体颗粒物以及土壤对有机物吸附常数的测定

本文介绍了用批量平衡测定水体悬浮颗粒物以及土壤对有机物吸附常数的测定方法，并给出实例和方法的注意事项。     

无机陶瓷纳滤膜分离高钠盐废水中的锶

本实验研究表明,仅用截留分子量为1000的无机陶瓷纳滤膜分离高钠盐模拟溶液中的锶,分离效果并不理想.为提高陶瓷纳滤膜对锶的选择分离效果,选择了分子量为3000的聚丙烯酸作为陶瓷纳滤膜分离的强化剂,重点探讨了溶液pH值、聚丙烯酸浓度、温度及离子强度对模拟溶液盐分离效果和膜通量的影响,并得到了适宜的锶钠分离条件.实验结果表明,在适宜条件下,通过聚丙烯酸强化和两级分离,陶瓷纳滤膜可大大提高模拟溶液中锶离子的选择分离效果,锶/钠的分离因子高达205.     

我国10万t／d以下城市污水处理工艺

我国城市污水处理厂的规模绝大多数在10万t／d以下（含10万t／d），由于10万t／d以下的城市污水处理的工艺繁多，且各有利弊，选择何种工艺对城市污水进行处理，是建设项目的业主、设计单位和主管政府部门较难解决但又必须解决的问题。本文从城市污水处理厂的处理工艺入手，根据国家的城市污水处理及污染防治技术政策，对10万t／d以下城市污水处理工艺进行排序和优选，并给出城市污水处理厂建设及运营的主要技术经济指标，供城市污水处理厂建设的相关方参考。     

γ-射线辐照法改善城市污水厂剩余污泥厌氧消化特性的研究

采用γ-射线辐照法对城市污水厂剩余污泥进行预处理，从固体组分、可溶性组分及厌氧产气量等角度来探讨γ-射线辐照法改善城市污水厂剩余污泥厌氧消化特性的可行性。结果表明，经γ-射线辐照处理后，污泥的平均粒径减小，在辐照剂量为6．51-30．75kGy范围内，粒径的减小率达30％-50％；可溶性有机组分随着辐照剂量升高而增加，当辐照剂量为19．4kGy时，SCOD增加率达552．5％；与未辐照相比，污泥经2．48、6．51、11．24kGy辐照处理后，厌氧消化累计产气量分别增加8．89％、19．74％和35．81％。γ-射线辐照法是一种有效的改善污泥厌氧消化特性的方法，11．24kGy左右的剂量可作为污泥预处理的最佳剂量。