Identification of chemical substances in industrial wastes and their pyrolytic decomposition products

In order to quantify the sources of chemical pollutants in the leachate from reclaimed wastes, chemical substances in 11 different types of industrial wastes were identified. Their elution behaviors were also investigated. Alkanes (5.3-890 ng g(-1)), benzenes (8.1-110 ng g(-1)), polyaromatic hydrocarbons (PAHs) (3.2-560 ng g(-1)), alcohols, steroids, phenol (7.1 ng g(-1)), ketones, furans (190-210 ng g(-1)), phthalates (8.9-560 ng g(-1)), benzoquinones, dibenzothiophene (190 ng g(-1)), benthiocarb (4.2 ng g(-1)), sulfur, nitrile compounds, amino compounds, amido compounds, pyridines, quinolines (1.8-15 ng g(-1)), isoquinolines, carbazoles, acridines, chlordenes (1.5-1.6 ng g(-1)) and nonachlors (1.1-1.6 ng g(-1)) were detected in 9 types of industrial wastes. The chemical substances detected in waste at the highest concentrations were alkanes, PAHs and phthalates. Water supply sludge, dust and brick garbage contained many kinds of chemical substances. The elution behaviors of specific chemical substances, COD and nutrients varied by characteristic and production process of each waste. Over 100 different compounds were detected in pyrolysis products including carbohydrate, carotynoid, amino acids, proteins, humic acids, lignin and combustion products.     

Microbial fuel cell (MFC) for bioelectricity generation from organic wastes

Microbial fuel cells (MFCs) have gained a lot of attention recently as a mode of converting organic matter into electricity. In this study, a compost-based microbial fuel cell that generates bioelectricity by biodegradation of organic matter is developed. Grass cuttings, along with leaf mold, rice bran, oil cake (from mustard plants) and chicken droppings (waste from chickens) were used as organic waste. The electric properties of the MFC under anaerobic fermentation condition were investigated along with the influence of different types of membranes, the mixing of fly ash, and different types of electrode materials. It is observed that the maximum voltage was increased by mixing fly ash. Cellophane showed the highest value of voltage (around 350 mV). Bamboo charcoal is good for anode material; however carbon fiber is better for the cathode material in terms of optimization of power generated. This developed MFC is a simple cell to generate electricity from organic waste.     

Species-specific and female host-biased ectophoresy in the roundworm Caenorhabditis japonica

Caenorhabditis japonica is a bacteriophagous nematode species that was discovered on the semi-social burrower bug, Parastrachia japonensis, which demonstrates egg-guarding and provisioning behaviors. To understand the life history of C. japonica in relation to P. japonensis, we demonstrated the specificity of this association and fluctuations in nematode number on the insect throughout the year. C. japonica dauer larvae (DL), larvae in a nonfeeding diapause stage, were predominantly found as clumps on the adult female insects but rarely found on the male insects in all populations examined. This female-biased association was consistent throughout the year, but after the nymphs hatched, nematodes were not detected on the mother insects showing provisioning behavior. DL appeared on the nymphs, and the number of DL on the newly emerged female insects gradually increased thereafter. C. japonica has never been detected on other invertebrates collected from the P. japonensis habitat thus far. Our data suggest that the life cycles of C. japonica and P. japonensis are synchronized.     

Medaka (Oryzias latipes) for use in evaluating developmental effects of endocrine active chemicals with special reference to gonadal intersex (testis-ova).

Japanese medaka (Oryzias latipes) has been widely used for the evaluation of the toxicity of endocrine active chemicals (EACs) and other chemicals as well as for monitoring the adverse effects of effluent discharges in relation to sexual development and function. It is useful for these evaluations for many reasons including the following: 1) it has a short life cycle facilitating studies extending over long phases of development and over multigenerations, 2) it is easy to rear, 3) male and female phenotypes can easily be distinguished on the basis of secondary sex characteristics, and 4) a genetic marker (DMY) is available for identifying the true genotypic sex. Several biomarkers have been found to be useful for identifying the effects of exposure to estrogenic and androgenic chemicals in medaka and they include increased levels of hepatic vitellogenin (VTG) and testis-ova induction in males for exposure to estrogenic chemicals, and decreased levels of hepatic VTG in females and an altered morphology of dorsal and anal fins and formation of papillae for androgenic chemicals. In this paper, we present a critical analysis of the use of medaka as a test species for studies of endocrine disruption and report on the use of sex-related genetic markers and alterations in gonadal development, including the induction of testis-ova formation, for assessing the disruptive effects of EACs. In this paper, we focus on some of the more recent studies and findings.     

Workers select mates for queens: a possible mechanism of gene flow restriction between supercolonies of the invasive Argentine ant

Some invasive ants form large networks of mutually non-aggressive nests, i.e., supercolonies. The Argentine ant Linepithema humile forms much larger supercolonies in introduced ranges than in its native range. In both cases, it has been shown that little gene flow occurs between supercolonies of this species, though the mechanism of gene flow restriction is unknown. In this species, queens do not undertake nuptial flight, and males have to travel to foreign nests and cope with workers before gaining access to alien queens. In this study, we hypothesized that male Argentine ants receive interference from workers of alien supercolonies. To test this hypothesis, we conducted behavioral and chemical experiments using ants from two supercolonies in Japan. Workers attacked males from alien supercolonies but not those from their own supercolonies. The level of aggression against alien males was similar to that against alien workers. The frequency of severe aggression against alien males increased as the number of recipient workers increased. Cuticular hydrocarbon profiles, which serve as cues for nestmate recognition, of workers and males from the same supercolony were very similar. Workers are likely to distinguish alien males from males of their own supercolony using the profiles. It is predicted that males are subject to considerable aggression from workers when they intrude into the nests of alien supercolonies. This may be a mechanism underlying the restricted gene flow between supercolonies of Argentine ants. The Argentine ant may possess a distinctive reproductive system, where workers participate in selecting mates for their queens. We argue that the aggression of workers against alien males is a novel form of reproductive interference.     

Regulation of non-point source pollution under n-firm Bertrand competition

Environmental Economics and Policy Studies - This study demonstrates the conditions under which an increase in the ambient charge positively or negatively affects the total level of non-point...     

Evaluation of thermally treated asbestos based on fiber number concentration determined by transmission electron microscopy

Appropriate treatment of asbestos waste is a significant problem. In Japan, inertization of asbestos-containing waste by novel techniques approved by the Ministry of the Environment is now promoted. A quantitative method of testing with high sensitivity to the asbestos levels present in the inertization products is required for the approval process, but many testing methods are only qualitative. Thus, we have developed an evaluation method for asbestos in inertized products, consisting of the extraction of fibers from inertized products and determination of fiber number concentration by transmission electron microscopy. We adopted this testing method to evaluate thermally treated asbestos. It was found that fiber number concentrations of thermally treated asbestos decreased with increased treatment temperature, and were below the environmental level (10² Mf/g) at more than 1000 °C for chrysotile and crocidolite and more than 1400 °C for amosite and other amphibole forms of asbestos.     

Determination of an acceptable assimilable organic carbon (AOC) level for biological stability in water distribution systems with minimized chlorine residual

There is considerable interest in minimizing the chlorine residual in Japan because of increasing complaints about a chlorinous odor in drinking water. However, minimizing the chlorine residual causes the microbiological water quality to deteriorate, and stricter control of biodegradable organics in finished water is thus needed to maintain biological stability during water distribution. In this investigation, an acceptable level of assimilable organic carbon (AOC) for biologically stable water with minimized chlorine residual was determined based on the relationship between AOC, the chlorine residual, and bacterial regrowth. In order to prepare water samples containing lower AOC, the fractions of AOC and biodegradable organic matter (BOM) in tap water samples were reduced by converting into biomass after thermal hydrolysis of BOM at alkaline conditions. The batch-mode incubations at different conditions of AOC and chlorine residual were carried out at 20°C, and the presence or absence of bacterial regrowth was determined. The determined curve for biologically stable water indicated that the acceptable AOC was 10.9 μg C/L at a minimized chlorine residual (0.05 mg Cl₂/L). This result indicated that AOC removal during current water treatment processes in Japan should be significantly enhanced prior to minimization of the chlorine residual in water distribution.     

Dose estimation and radon action level problems due to nanosize radon progeny aerosols in underground manganese ore mine

One of the essential parameters influencing of the dose conversion factor is the ratio of unattached short-lived radon progeny. This may differ from the value identified for indoor conditions when considering special workplaces such as mines. Inevitably, application of the dose conversion factors used in surface workplaces considerably reduces the reliability of dose estimation in the case of mines.This paper surveyed the concentration of radon and its short-lived radon progeny and identified the unattached fraction of short-lived radon progeny. As well equilibrium factor during the month of August was calculated simultaneously at two extraction faces in a manganese ore mine.During working hours the average radon concentrations were 220 Bq m⁻³ and 530 Bq m⁻³ at Faces 1 and 2; the average short-lived progeny concentration was 90 Bq m⁻³ and 190 Bq m⁻³, the average equilibrium factors were 0.46 and 0.36, and the average unattached fractions were 0.21 and 0.17, respectively. The calculated dose conversion factor was between 9 and 27 mSv WLM⁻¹, but higher values could also be possible.     

Flame retardants in indoor dust and air of a hotel in Japan

Occurrence of flame retardants (FRs) in the indoor environment of highly flame-retarded public facilities is an important concern from the viewpoint of exposure because it is likely that FRs are used to a greater degree in these facilities than in homes. For this study, brominated flame-retardants (BFRs) and organophosphate flame-retardants and plasticizers (OPs), and brominated dibenzo-p-dioxins/furans (PBDD/DFs) were measured in eight floor dust samples taken from a Japanese commercial hotel that was assumed to have many flame-retardant materials. Concentrations of polybrominated diphenylethers (PBDEs) and hexabromocyclododecanes (HBCDs) varied by about two orders of magnitude, from 9.8–1700 ng/g (median of 1200 ng/g) and from 72–1300 ng/g (median of 740 ng/g), respectively. Concentrations of the two types of BFRs described above were most dominant among the investigated BFRs in the dust samples. It is inferred that BFR and PBDD/DF concentrations are on the same level as those in house and office dust samples reported based on past studies. Regarding concentrations of 11 OPs, 7 OPs were detected on the order of micrograms per gram, which are equivalent to or exceed the BFR concentrations such as PBDEs and HBCDs. Concentrations of the investigated compounds were not uniform among dust samples collected throughout the hotel: concentrations differed among floors, suggesting that localization of source products is associated with FR concentrations in dust. Passive air sampling was also conducted to monitor BFRs in the indoor air of hotel rooms: the performance of an air cleaner placed in the room was evaluated in terms of reducing airborne BFR concentrations. Monitoring results suggest that operation of an appropriate air cleaner can reduce both gaseous and particulate BFRs in indoor air.