气相连通罐组群罐燃爆风险定量评估技术研究

炼化企业气相连通罐组存在群罐重大火灾风险,需要采取系统评估、层层设防的思路进行防控。采用HALOPA技术,结合中国石化风险矩阵标准,建立基于风险的气相连通罐组重大燃爆风险控制准则、不同罐容的事故后果等级划分标准、各类保护措施的风险消减因子和燃爆事件可能性评估方法以及相关重要设计要求。案例分析表明,VOCs气相连通罐组群罐燃爆风险定量评估方法可对群罐火灾风险进行快速量化评估,可用于气相连通罐组的风险评估和工程安全设计。     

HAZOP方法在炼化企业供电系统评估中的应用

基于HAZOP的方法对炼化企业电力系统进行分析,可以有效提高炼化企业电气安全平稳运行水平,降低发生大面积停电事故的风险。该分析方法不同于化工企业的HAZOP分析方法,在分析流程细节中,结合电气专业化的特点,形成了一套具有炼化企业供电系统风险评估特色的评价方法,为炼化企业供电系统在规划、设计、运行等阶段提供依据。     

烟花爆竹燃放对大气污染物及PM2.5组分影响

为了解烟花爆竹燃放对保定市大气污染物和PM_2.5中水溶性离子及有机碳(OC)、元素碳(EC)浓度的影响,对保定市春节期间大气污染物和颗粒物组分的浓度特征进行了分析,并评估了烟花爆竹的贡献.结果表明:2019年春节期间烟花爆竹集中燃放期PM_2.5、PM10、SO2、NO2、CO平均浓度比非集中燃放期分别增加了1.3、1.0、1.1、0.4、0.02倍;保定市春节期间禁燃措施施行后,除夕、初一2d污染物平均浓度、最高浓度和高浓度持续时间均明显下降,集中燃放期烟花爆竹燃放对PM_2.5、PM10和SO2浓度贡献量从50%左右(2018年、2017年)下降至30%左右(2019年),其中SO2贡献量下降幅度超过PM_2.5和PM10;组分分析表明,接待中心站点(主城区)、涿州站点(区县建成区)烟花爆竹燃放期K⁺、Mg²⁺、Cl^-浓度在水溶性离子中的总占比分别为39.3%、51.1%,比非燃放期的占比显著上升;烟花爆竹燃放对PM_2.5     

小型燃煤机组烟气重金属排放特征研究

100 MW以下燃煤机组呈单台容量小、总台数大的特点,是燃煤重金属污染的主要排放源之一.选择7台12 MW燃煤机组,采用美国环境保护局Method 29法现场检测燃煤机组烟气重金属排放浓度,分析烟气中Hg、Pb、Cr、As的排放特征;采集机组产生的飞灰和底灰,分析除尘技术对重金属的富集特性.结果表明:100 MW以下燃煤机组烟气中重金属经脱硝除尘脱硫装置协同控制后,ρ（Hg）为0.20~0.44 μg/m3,烟气Hg以气态形式存在,其占比为100.0%;ρ（Pb）为0.5~2.6 μg/m3,烟气Pb主要以气态形式存在,其占比为38.7%~92.1%;ρ（As）为0.6~3.0 μg/m3,烟气As主要以气态形式存在,其占比为67.8%~100.0%;ρ（Cr）为3.6~23.9 μg/m3,烟气Cr主要以颗粒态形式存在,其占比为65.8%~99.2%.飞灰富集Hg、Pb、Cr、As的能力大于底灰.重金属主要富集于飞灰中的细颗粒物中,采取除尘技术可有效协同控制烟气中的Hg、Pb、Cr、As;飞灰中重金属元素Hg、Pb相对富集系数均与煤中硫含量呈负相关,半干法脱硫+袋式除尘技术对飞灰富集Hg有促进作用.小型燃煤机组烟气重金属Hg、Pb、Cr、As的排放因子分别为0.002 2~0.005 1、5~17、42~160、7~24 mg/t.研究显示,100 MW以下燃煤机组与100 MW及以上燃煤机组烟气重金属Hg、Pb、Cr、As排放特征不同,100 MW以下燃煤机组烟气Hg排放浓度较小,二者烟气Pb、Cr、As排放浓度相近,选用湿式电除尘技术可进一步降低烟气Hg、Pb、Cr、As的排放浓度.      

融合Lamb-Jenkinson分型法和LSTM神经网络的PM2.5预测研究

文章采用NCEP/NCAR逐日海平面气压场资料,利用Lamb-Jenkinson环流分型法对张家口大气环流进行分型,分析环流型与PM_(2.5)质量浓度之间的关系,并针对PM_(2.5)浓度的预测,提出一种融合Lamb-Jenkinson环流分型和LSTM神经网络混合模型的方法,即以环流指数为预测因子基于LSTM方法搭建PM_(2.5)质量浓度的预测模型。结果表明:影响张家口地区的主要环流型有反气旋型、气旋型、偏北平直型、西南平直型、偏西平直型、东北平直型等、西北平直型、偏东平直型。PM_(2.5)污染日出现的主要环流型为南气旋平直型、东南平直型、偏南平直型、偏东气旋型、西南气旋平直型、偏东平直型、气旋型等,而反气旋型和反气旋式平直环流型不利于污染出现。张家口地区的PM_(2.5)污染与地面环流有着密切的联系,当存在PM_(2.5)污染时,张家口地区处于日本海高压后部的均压场区域,污染越严重,日本海高压中心强度越强。模型预测结果的均方根误差为9.88、平均绝对误差为5.84、拟合优度达0.80,表明该模型具有一定的预报能力。     

Cr(Ⅵ)踪迹指标现场测定用于铬污染地下水源解析

根据研究区地下水样品测试结果,该文选定与Cr(Ⅵ)极强相关,且物理化学性质较稳定的钠离子作为研究地下水中Cr(Ⅵ)迁移规律的踪迹指标,并采用钠离子复合电极建立了踪迹指标现场检测方法。实验结果表明,钠离子浓度在5～500 mg/L线性范围内的电极响应斜率为-61.09 mV/pNa(103%),方法检出限为0.69 mg/L,加标回收率为92.8%～103.4%,现场测试结果与实验室测试结果一致。该研究根据踪迹指标钠离子与污染物现场检测数据,构建了钠离子与Cr(Ⅵ)浓度比值的对数函数,并有效识别出主污染源、次级污染源、污染物迁移主路径、潜在污染区、潜在影响区及背景区,为铬渣类污染场地土壤和地下水环境风险评价及污染修复提供了技术支撑和参考依据。     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate(TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl-and PO₄^3- of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system ...     

On-going nitrification in chloraminated drinking water distribution system (DWDS) is conditioned by hydraulics and disinfection strategies

Within the drinking water distribution system (DWDS) using chloramine as disinfectant,nitrification caused by nitrifying bacteria is increasingly becoming a concern as it poses a great challenge for maintaining water quality.To investigate efficient control strategies,operational conditions including hydraulic regimes and disinfectant scenarios were controlled within a flow cell experimental facility.Two test phases were conducted to investigate the effects on the extent of nitrification of thre...     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds(BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol(SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity.In places with high plant cover in the tropics and in China where air pollution is serious,the effect of BVOCs on ozone and secondary organic aerosols is strong.The present research aims to provide a comprehensive review ...