崂山水库上游区生态环境需水量的计算

本文建立了崂山水库上游区生态环境需水量的计算方法,并计算了该区域的生态环境需水量.结果表明崂山水库上游区生态环境需水量为3089.78×104m3,其中植被生态环境需水量为2792.7×104m3,河流生态环境需水量为291.95×104m3,水库生态环境需水量为5.13×104m3.崂山水库上游区生产生活用水总量为63.67×104m3,多年平均水资源总量为4032.7×104m3,说明从全年来看该区域生态环境需水能够得到基本满足.但径流量年内分配极不均匀,大部分集中于丰水期,枯水期的生态环境需水可能无法保障.     

Inhibitory effects of catechol accumulation on benzene biodegradation in Pseudomonas putida F1 cultures

The influence of benzene concentration on the specific growth rate (mu), CO(2) and metabolite production, and cellular energetic content (i.e., ATP content), during benzene biodegradation by Pseudomonas putida F1 was investigated. Within the concentration range tested (5-130mg benzene l(-1)) the mu, the specific CO(2) production, and the ATP content remained constant at 0.42-0.48h(-1), 1.86+/-0.21g CO(2) g(-1) biomass, and 5.3+/-0.4x10(-6)mol ATP g(-1) biomass, respectively. Catechol accumulated during process start-up at all tested concentrations. Catechol specific production increased with increasing benzene inlet concentrations. This confirms that the transformation of this intermediate was the limiting step during benzene degradation. It was shown that catechol inhibited both the conversion of benzene to catechol and its further transformation. In addition, catechol concentrations higher than 10mgl(-1) significantly decreased both benzene and catechol associated respiration, confirming the highly inhibitory effect of this intermediate. This inhibitory threshold concentration was approximately two orders of magnitude lower than the concentrations present in the culture medium during process start-up, suggesting that cellular activity was always far below its maximum. Thus, due to its toxic and inhibitory nature and its tendency to accumulate at high benzene loading, catechol must be carefully monitored during process operation.     

矿井用箱体防爆面加工安全技术研究

箱体零件是矿井机械中重要的基础零件。它的加工质量直接关系矿井设备的寿命、机器的性能和安全性。针对煤矿井下煤尘和瓦斯存在的环境特性、煤矿井用箱体防爆面加工的特殊要求,采用控制理论的信息流图,对工艺过程中传统方块图进行简化,使繁杂的方块图解采用信息流图表示工艺过程的工序(变量)之间关系。进而讨论箱体零件加工工艺过程误差转换模型、形状精度特征、传递图、描述方程、误差转换结构图;提出防爆面磨削工艺系统的数学模型;求解出振动特性、幅值和相位,得出了形状误差与工艺参数的关系曲线。实践证明,合理选择磨削参数,能够保证煤矿井下工作机械具有高的防爆性能,达到矿井安全生产的技术要求。     

德国特警的招募及培训

德国特警部队主要分为5支,他们是德国陆军特种部队（KSK--Kommando Spezial Kraefte）、德国国境警备部队9队（GSG-9--Bundesgrenzschutz Grenzschutzgruppe-9）、德国警察特别作战部队（SEK-Spezialeinsatzkommandos der deutschen Polizei）、德国海关中心支援部队（ZUZ）、德国水上战斗部队（实战部队3402）.     

造纸黑液木质素利用研究进展

本文对造纸黑液木质素利用研究现状进行了综述。内容包括木质素在肥料、混凝土减水剂、燃煤、水处理、石油开采、木材胶粘剂、橡胶补强剂和香兰素合成等方面的应用概况。这些技术成果是木质素工业化利用的重要基础。木质素来源丰富 ,具有优良的理化特性和广阔的应用前景 ,加强研究与应用开发对促进资源充分利用、环境保护与制浆造纸协调持续发展意义重大。     

伊犁河流域林业生态科技示范区建设对生态服务价值的影响

采用生态系统服务价值计算方法,估算伊犁河流域林业生态科技示范区建设前后生态服务价值变化.结果显示:草地退化前,示范区生态服务价值为64.0万元·a-1;近几十年由于超载过牧草地,生物量明显下降,2003年生态服务价值降至45.9万元.示范区建设以后,生态服务价值显著提高.与草地退化前相比,2006年生态服务价值增长64.5%;与草地退化后相比,生态服务价值增长129.2%,主要由生态服务间接利用价值提供.表明伊犁河流域林业生态科技示范区建设提升了该区生态服务价值,生态经济效益显著.     

NO oxidation performance and kinetics analysis of BaMO3 (M=Mn,Co) perovskite catalysts

Environmental Science and Pollution Research - Perovskite is an efficient and emerging catalyst for NO oxidation. In this study, BaMnO3 and BaCoO3 perovskite catalysts were synthesized by the...     

北京地区电镀项目环境保护验收特点及验收监测关键环节研究

北京市的电镀企业规模小,污染很大。根据建设项目竣工环境保护验收规范要求,针对北京市电镀项目环保验收特点,作者总结了此类项目验收的工作重点,提出废水、废气与固体废物并重、污染物浓度排放及总量排放兼顾的实施方案。除此以外,文章还具体介绍了在电镀项目的环保验收中怎样结合环保管理部门的要求,进行废气、废水的现场监测及固体废物处置、环境管理检查等工作。本文不仅能为环境管理部门提供管理、规范电镀行业污染的有效方法,同时,也对电镀企业提高其污染治理和资源综合利用水平指明了方向,大大促进了电镀产业逐渐向环境友好型产业发展,最终实现电镀无害化的发展目标。     

Microalgae cultivation using an aquaculture wastewater as growth medium for biomass and biofuel production

Microalgae as a main feedstock has attracted much attention in recent years but is still not economically feasible due to high algal culture cost. The objective of this study was to develop a comprehensive eco-friendly technology for cultivating microalgae Platymonas subcordiformis using aquaculture wastewater as growth medium for biomass and biofuel production. Platymonas subcordiformis was grown in pretreated flounder aquaculture wastewaters taken from different stages. Each of wastewater contained different levels of nutrients. The biomass yield of microalgae and associated nitrogen and phosphorous removal were investigated. The results showed that algal cell density increased 8.9 times than the initial level. Platymonas subcordiformis removed nitrogen and phosphorus from wastewater with an average removal efficiency of 87%-95% for nitrogen and 98%-99% for phosphorus. It was feasible to couple the removal of nitrogen and phosphorus from wastewater to algal biomass and biofuel production. However, further studies are required to make this technologies economically viable for algae biofuel production.