An overview of systems analysis methods in delineating environmental quality indices

Environmental quality indices (EQIs) have been developed for a variety of purposes ranging from enforcement of environmental standards, to analysis of trends of environmental degradation or improvement, to scientific research. EQIs currently in use are not organized within an integrated framework and thus it has been difficult to analyze adequately complex, multidisciplinary, large-scale, global phenomena. In this paper we compare four different approaches to developing EQIs within a systems perspective. Our analysis suggests that: (1) non-linear regression models that represent an ecosystem's response to different impacts within a stress-response framework (method of response functions) are useful tools for analysis of environmental data; (2) non-equilibrium thermodynamics models based on the concept of exergy, which represents the free energy a system possesses in relation to its environment, provide a common basis for representing many aspects of ecosystem development and response to environmental impacts as a single measure; (3) diagram models based on the concept of emergy, which represents both environmental values and economic values with a single measure, provide a common basis for integrating economic development and environmental protection values into one index; and (4) complex systems simulation models based on general systems theory, which use the methodologies of systems analysis and simulation to identify, quantify, and interrelate EQIs within a dynamic systems context, provide explicit linkages between causes and effects (vertical integration) and identify cross-linkages among different environmental issues (horizontal integration).     

Effect of mixing on NO removal in the selective noncatalytic reduction reaction process

The effect of mixing of NH₃ and NO on the selective noncatalytic reduction (SNCR) reaction was investigated using a bench-scale reactor. Three different experimental conditions were compared for the removal of NO in the bulk gas with NH₃, a reducing agent, by means of mixing and contacting. The temperature that gave the highest NO removal efficiency was about 800°C when NH₃ was injected with air or NH₃ was premixed and air was injected. It is suggested that control of mixing of the reducing agent and the injection conditions could be a good way to increase NO removal efficiency as well as to lower the reaction temperature. When NH₃ was injected with air, the NO removal efficiency increased with increasing injected air flow if the initial NO concentration was low, whereas for high NO concentrations, the NO removal efficiency slightly increased up to an injected air flow rate of 100 ml/min. A proposed mixed-flow model can be used as a prediction tool for the NO removal efficiency covering various conditions of the real SNCR process.     

Heavy metal immobilization in soil near abandoned mines using eggshell waste and rapeseed residue

Heavy metal contamination of agricultural soils has received great concern due to potential risk to human health. Cadmium and Pb are largely released from abandoned or closed mines in Korea, resulting in soil contamination. The objective of this study was to evaluate the effects of eggshell waste in combination with the conventional nitrogen, phosphorous, and potassium fertilizer (also known as NPK fertilizer) or the rapeseed residue on immobilization of Cd and Pb in the rice paddy soil. Cadmium and Pb extractabilities were tested using two methods of (1) the toxicity characteristics leaching procedure (TCLP) and (2) the 0.1 M HCl extraction. With 5 % eggshell addition, the values of soil pH were increased from 6.33 and 6.51 to 8.15 and 8.04 in combination with NPK fertilizer and rapeseed residue, respectively, compared to no eggshell addition. The increase in soil pH may contribute to heavy metal immobilization by altering heavy metals into more stable in soils. Concentrations of TCLP-extracted Cd and Pb were reduced by up to 67.9 and 93.2 % by addition of 5 % eggshell compared to control. For 0.1 M HCl extraction method, the concentration of 0.1 M HCl-Cd in soils treated with NPK fertilizer and rapeseed residue was significantly reduced by up to 34.01 and 46.1 %, respectively, with 5 % eggshell addition compared to control. A decrease in acid phosphatase activity and an increase in alkaline phosphatase activity at high soil pH were also observed. Combined application of eggshell waste and rapeseed residue can be cost-effective and beneficial way to remediate the soil contaminated with heavy metals.     

Application of eggshell waste for the immobilization of cadmium and lead in a contaminated soil

Liming materials have been used to immobilize heavy metals in contaminated soils. However, no studies have evaluated the use of eggshell waste as a source of calcium carbonate (CaCO?) to immobilize both cadmium (Cd) and lead (Pb) in soils. This study was conducted to evaluate the effectiveness of eggshell waste on the immobilization of Cd and Pb and to determine the metal availability following various single extraction techniques. Incubation experiments were conducted by mixing 0-5% powdered eggshell waste and curing the soil (1,246 mg Pb kg?1 soil and 17 mg Cd kg?1 soil) for 30 days. Five extractants, 0.01 M calcium chloride (CaCl?), 1 M CaCl?, 0.1 M hydrochloric acid (HCl), 0.43 M acetic acid (CH?COOH), and 0.05 M ethylendiaminetetraacetic acid (EDTA), were used to determine the extractability of Cd and Pb following treatments with CaCO? and eggshell waste. Generally, the extractability of Cd and Pb in the soils decreased in response to treatments with CaCO? and eggshell waste, regardless of extractant. Using CaCl? extraction, the lowest Cd concentration was achieved upon both CaCO? and eggshell waste treatments, while the lowest Pb concentration was observed using HCl extraction. The highest amount of immobilized Cd and Pb was extracted by CH?COOH or EDTA in soils treated with CaCO? and eggshell waste, indicating that remobilization of Cd and Pb may occur under acidic conditions. Based on the findings obtained, eggshell waste can be used as an alternative to CaCO? for the immobilization of heavy metals in soils.     

Effect of soil aggregation on the biodegradation of phenanthrene aged in soil

A study was conducted to determine the possible role of soil aggregates in the sequestration of phenanthrene and thus in the declined biodegradation of the hydrocarbon. Phenanthrene aged in Lima loam (2-mm aggregates) showed declined biodegradation with time of aging to the test bacterium P5-2 capable of using sorbed phenanthrene. In contrast, the compound aged in a soil reconstructed with 68% clay-silt and 32% sand that had been separated from the Lima loam was readily mineralized. The percentages of each fraction used were the same as those of the original soil. Biodegradation of aged phenanthrene was not affected significantly by varying the ratios of each fraction in reconstructed mixtures. In experiments with Lima loam, its clay-silt fraction, and its sand fraction, mineralization extent was much lower in soil aggregates compared with the other samples while all had similar organic carbon content of ca. 1.51%. This suggests that aggregation may be another important determinant in the reduced biodegradation of aged phenanthrene.     

A novel BiVO4-GO-TiO2-PANI composite for upgraded photocatalytic performance under visible light and its non-toxicity

A novel non-toxic hybrid BiVO₄-GO-TiO₂-polyaniline (PANI) (BVGT-PANI) composite with superior photocatalysis was successfully prepared via a one-pot hydrothermal reaction. The structural and morphological characterizations of the synthesized compounds were analyzed by a series of techniques. We found excellent photocatalytic efficiencies for methylene blue (MB) and phenol degradation under visible light irradiation after adhering the PANI to the photocatalyst. The degradation rates of MB and phenol reach up to approximately 85% and 80%, respectively, after 3 h of irradiation. For photodegradation MB, BVGTA exhibit the highest k_app rate constant of about 1.06?×?10^?2 min^?1, which is about 1.63-fold faster than BVG and 2.94-fold faster than BVGT. For photodegradation of phenol, BVGTA exhibits the highest k_app rate constant, of about 8.86?×?10^?3min^?1, which is about 1.2-fold faster than BVG and 1.96-fold faster than BVGT. Furthermore, vitro toxicity test against Bacillus subtilis and Staphylococcus aureus demonstrated that the nanophotocatalyst is non-toxic.

     

Understanding Anglers’ Preferences for Fishing Tournament Characteristics and Policies

Saltwater fishing tournaments in the United States are generally not regulated nor are there different fishing regulations for tournament and nontournament anglers. Although much is known about those who participate in fishing tournaments in terms of their fishing motivations, attitudes, and characteristics, much less is known at the angler population level regarding their preferences for tournament opportunities. Using a stated preference choice model with hypothetical scenarios to simulate participation choices and understand preferences, study objectives were to identify angler preferences for various types of tournament fishing “products.” Four tournament policy characteristics were investigated: promotion of catch and release, bait restrictions, whether a percentage of the tournament entrance fee should go to support fishery management activities, and whether a tournament should be a nonprofit or profit-making venture. Three expectation attributes were inserted: tournament size, trip cost per day, and whether a tournament is family friendly. We sent seven different versions of the mail questionnaire to 1,633 anglers. Of 795 returns, 648 were used for estimating conditional logit models. Analysis indicated that a scenario with no management interventions was not most preferred. Anglers most preferred a conservation-oriented option that introduced additional management measures. Overall, scenarios with management interventions were more favored than the status quo situation (with no management interventions). Although respondents showed reluctance to adopt other management-related options, results generally indicated they were increasingly concerned with sustainability of fish stocks and potential conflicts between tournament and nontournament users and preferred tournament products that reflect these concerns.     

Alleviation of Cd toxicity by composted sewage sludge in Cd-treated Schmidt birch (Betula schmidtii) seedlings

We investigated alleviation of Cd toxicity and changes in the physiological characteristics of Betula schmidtii seedlings following application of composted sewage sludge to Cd-treated plants. Plants were grown under four test conditions: control, Cd treatment, sludge amendment, and Cd treatment with sludge amendment. B. schmidtii treated with Cd only accumulated the greatest amount of Cd in the leaves, but absorbed Cd was also highly concentrated in the roots. In contrast, Cd concentrations in the Cd and sludge amendment treated seedlings were the lowest in the roots. Since sludge amendment increased the growth of seedlings, it may have alleviated toxicity by dilution of Cd. Additionally, the absorbed Cd was more widely distributed since it was transported from the roots and accumulated in the stems and leaves of Cd and sludge treated plants. Cd treatment inhibited the growth and physiological functions of B. schmidtii seedlings, but sludge amendment compensated for these effects and improved growth and physiological functions in both Cd-treated and control plants. SOD activity in the leaves of seedlings was increased in the Cd-treated plants, but not in the Cd and sludge amendment treated seedlings. In conclusion, alleviation of Cd toxicity in response to sludge amendment may be related to a dilution effect, in which the Cd concentration in the tissues was effectively lowered by the improved growth performance of the seedlings.     

Decision-Tree-based data mining and rule induction for predicting and mapping soil bacterial diversity

Soilmicrobial ecology plays a significant role in global ecosystems. Nevertheless, methods of model prediction and mapping have yet to be established for soil microbial ecology. The present study was undertaken to develop an artificial-intelligence- and geographical information system (GIS)-integrated framework for predicting and mapping soil bacterial diversity using pre-existing environmental geospatial database information, and to further evaluate the applicability of soil bacterial diversity mapping for planning construction of eco-friendly roads. Using a stratified random sampling, soil bacterial diversity was measured in 196 soil samples in a forest area where construction of an eco-friendly road was planned. Model accuracy, coherence analyses, and tree analysis were systematically performed, and four-class discretized decision tree (DT) with ordinary pair-wise partitioning (OPP) was selected as the optimal model among tested five DT model variants. GIS-based simulations of the optimal DT model with varying weights assigned to soil ecological quality showed that the inclusion of soil ecology in environmental components, which are considered in environmental impact assessment, significantly affects the spatial distributions of overall environmental quality values as well as the determination of an environmentally optimized road route. This work suggests a guideline to use systematic accuracy, coherence, and tree analyses in selecting an optimal DT model from multiple candidate model variants, and demonstrates the applicability of the OPP-improved DT integrated with GIS in rule induction for mapping bacterial diversity. These findings also provide implication on the significance of soil microbial ecology in environmental impact assessment and eco-friendly construction planning.