Influence of ship emissions on ozone concentrations around coastal areas during summer season

The influence of ship emissions on ozone (O₃) concentrations in a coastal area (CA) including Busan port, Korea was examined based on a numerical modeling approach during a high O₃ episode. The analysis was performed by two sets of simulation scenarios: (1) with ship emissions (e.g., TOTAL case) and (2) without ship emissions (e.g., BASE case). A process analysis (PA) (the integrated processes rate (IPR) and integrated reaction rate (IRR) analyses) was used to evaluate the relative contributions of individual physical and chemical processes in O₃ production in and around the CA (e.g., sites of Dong Sam (DS) and Dae Yeon (DY)). The model study suggested the possibility that pollutant gases emitted from the ships traversing Busan port can exert a direct impact on the O₃ concentration levels in the CA. Largest impacts of ship emissions on the O₃ concentrations were predicted at the coast (up to 15 ppb) and at inland locations (about 5 ppb) due to both the photochemical production of pollutant gases emitted from the ships and meteorological conditions. From the PA, the photochemical production of O₃ (P(O₃)) due to ship emissions in the CA was found to increase by a mean of 1.5 ppb h^?1 (especially by ≥10 ppb h^?1 at the DS site) during the day.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.     

Characteristic occurrence patterns of micropollutants and their removal efficiencies in industrial wastewater treatment plants

The concentrations and removal efficiencies of various kinds of micropollutants were investigated and the relationships between the input sources of industrial wastewater and occurrence patterns of each micropollutant were identified at nine on-site industrial wastewater treatment plants (WWTPs). The distribution pattern of each compound varied according to the WWTP type and several micropollutants were significantly related with specific industries: chlorinated phenols (ClPhs) with paper and metal industries, polycyclic aromatic hydrocarbons (PAHs) with petrogenic- and pyrogenic-related industries, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) with the paper industry, and chlorinated benzenes (ClBzs) with dye-related industries. The activated sludge (AS) process was very efficient in the removal of ClPhs and PAHs, and the filtration process in the removal of PCDD/Fs and 1,4-dioxane. Generally, the removal efficiencies of each micropollutant varied according to the WWTP type.     

Outcome of prenatally diagnosed trisomy 6 mosaicism

We report the prenatal diagnosis of trisomy 6 mosaicism via amniocentesis, in which trisomy 6 cells were identified in three of five culture vessels with 33% (5/15) of colonies showing trisomic cells. The pregnancy was electively terminated and examination revealed minor abnormalities (shortening of the femurs, micrognathia, posterior malrotation of the ears, and bilateral camptomelia of the second digit of the hands and fifth digits of the feet). Cytogenetic analysis of the placenta showed trisomy 6 in 100% of 20 cells studied. Karyotype was 46,XX in 100 cells examined from fetal skin. There are relatively few prenatally diagnosed cases of mosaic trisomy 6 at amniocentesis. Confined placental mosaicism (CPM) has been postulated in other cases where follow-up cytogenetic studies were not available. The present case differs from those previously reported, as it appears to represent CPM of chromosome 6 with phenotypic effects to the fetus. Copyright © 2002 John Wiley & Sons, Ltd.     

SPATIALLY DISTRIBUTED MODELING OF STREAM FLOW DURING STORM EVENTS1

ABSTRACT: The purpose of this paper is to present a new approach for the spatially distributed modeling of water flow during storm events. Distributed modeling of flow during storm events is an important basis for any environmental modeling, including turbidity or sediment transport. During the initial phase of a rainstorm, surface runoff is the main contributor of flow. To provide the spatial components for distributed hydrological modeling a Geographic Information System (GIS) was used to map and visualize contributing areas around a stream channel. Stream segments were defined using the hydrologic response unit (HRU) concept. Lateral flows were derived from GIS output for each segment of the stream and at each time interval of the rain storm and were routed using the kinematic routing equation. This approach is new in hydrological modeling and can be used to enhance many existing simulations. The model is also unique in the fine time scale (i.e., intervals are on the order of minutes). Model results showed good correlation with measured discharge values; however, further studies of contributing area behavior, its relationship with soil types and slope categories, and the influence of watershed size are needed to improve model performance. This model will be used in the future as the basis to model turbidity in streams.     

Combined steam-dry reforming of toluene in syngas over CaNiRu/Al2O3 catalysts

Cracking, steam reforming, dry reforming, and combined steam and dry reforming of toluene in model syngas were performed using catalysts to simulate tar removal produced during biomass gasification. The catalysts were prepared by adding Ru, Ca, and Mn to Ni-based catalysts, and their properties were measured using BET, pulse CO chemisorption, XRD and TG. In steam and dry reforming of toluene, a high toluene conversion was observed with increasing Ca content in the catalyst and catalysts containing Ca showed a higher activity than those containing Mn. In combined steam-dry reforming with syngas, 1%CaNiRu/Al₂O₃ indicated a conversion of 93.9% at 800°C.     

Kinetics of the reactions of soot surface-bound polycyclic aromatic hydrocarbons with the OH radicals

The kinetics of the heterogeneous reaction of OH radicals with 15 polycyclic aromatic hydrocarbons (PAHs) present in laboratory generated simulated kerosene combustion soot was studied at T = 290 K in a low pressure discharge-flow reactor combined with an electron-impact mass spectrometer. The kinetics of soot-bound PAH consumption in reaction with OH were monitored using off-line HPLC measurements of their concentrations in soot samples as a function of time of exposure to OH. Concentration of OH radicals in the gas phase was measured by mass spectrometry. The first-order rate constants measured for the individual PAH at T = 290 K ranged from 0.02 to 0.04 s^?1 and were found to be independent of the OH concentration ([OH] = (0.34–2.5) × 10¹² molecule cm^?3) and of the molecular structure of the PAH. In addition, the uptake coefficient of OH on soot surface and the diffusion coefficient of OH in He were measured to be 0.19 ± 0.03 (calculated with geometric surface area) and (615 ± 80) Torr cm² s^?1, respectively. Comparison of the results on the PAH + OH reaction to those from previous studies carried out on different carbonaceous substrates, indicates probable dependence of the heterogeneous reactivity of PAH toward OH on the substrate nature. Rapid reaction with OH can be an important potential pathway of the atmospheric degradation of non-volatile PAH present mainly in the particulate phase in the atmosphere.