Isolation,identification, Pb(Ⅱ) biosorption isotherms and kinetics of a lead adsorbing Penicillium sp. MRF-1 from South Korean mine soil

A heavy metal contaminated soil sample collected from a mine in Chonnam Province of South Korea was found to be a source of heavy metal adsorbing biosorbents. Chemical analyses showed high contents of lead (Pb) at 357 mg/kg and cyanide (CN) at 14.6 mg/kg in the soil. The experimental results showed that Penicillium sp. MRF-1 was the best lead resistant fungus among the four individual metal tolerant fungal species isolated from the soil. Molecular characterization of Penicillium sp. MRF-1 was determined using ITS regions sequences. E ects of pH, temperature and contact time on adsorption of Pb(II) by Penicillium sp. MRF-1 were studied. Favorable conditions for maximum biosportion were found at pH 4 with 3 hr contact time. Biosorption of Pb(II) gradually increased with increasing temperature. E cient performance of the biosorbent was described using Langmuir and Freundlich isotherms. Adsorption kinetics was studied using pseudo first-order and pseudo second-order models. Biosorbent Penicillium sp. MRF-1 showed the maximum desorption in alkali conditions. Consistent adsorption/desorption potential of the biosorbent in repetitive cycles validated the e cacy of it in large scale. SEM studies given notes on surface modification of fungal biomass under metal stress and FT-IR results showed the presence of amino groups in the surface structure of the biosorbent. In conclusion, the new biosorbent Penicillium sp. MRF-1 may potentially be used as an inexpensive, easily cultivatable material for the removal of lead from aqueous solution.     

Vaporization reduction characteristics of aqueous ammonia solutions by the addition of ethylene glycol, glycerol and glycine to the CO2 absorption process

Aqueous ammonia (NH₃) solution can be used as an alternative absorption for the control of CO₂ emitted from flue gases due to its high absorption capacity, fast absorption rate and low corrosion problem. The emission of CO₂ from iron and steel plants requires much attention, as they are higher than those emitted from power plants at a single point source. In the present work, low concentration ammonia liquor, 9 wt.%, was used with various additives to obtain the kinetic properties using the blast furnace gas model. Although a solution with a high ammonia concentration enables high CO₂ absorption efficiency, ammonium ions are lost as ammonia vapor, resulting in reduced CO₂ absorption due to the lower concentration of the ammonia absorbent. To decrease the vaporization of ammonia, ethylene glycol, glycerol and glycine, which contain more than one hydroxyl radical, were chosen. The experiments were conducted at 313 K similar to the CO₂ absorption conditions for the blast furnace gas model.     

Empirical equation for transverse dispersion coefficient based on theoretical background in river bends

There are different approaches to estimating the transverse dispersion coefficient in river mixing. Theoretical approaches have derived the dispersion coefficient from the concept of shear flow, which has dominant effects on the transverse mixing. Empirical approaches have developed an equation using the hydraulic and geometric data of rivers through dimensional analysis and regression techniques. These two equations interact closely with each other. For example, the complicated theoretical equation can be simplified by empirical approaches, and the functional relationships of the empirical equation can be derived from theoretical bases. In this study, a new empirical equation for the transverse dispersion coefficient has been developed based on the theoretical background in river bends. As a regression method, the least-square iterative method was used because the equation was a nonlinear model. The estimated dispersion coefficients derived by the new equation were compared with observed transverse dispersion coefficients acquired from natural rivers and coefficients calculated by the other existing empirical equations. From a comparison of the existing transverse dispersion equations and the proposed equation, it appears that the behavior of the existing formula in a relative sense is very much dependent on the flow condition and the river geometry. Moreover, the proposed equation does not vary widely according to variation of flow conditions. Also, it was revealed that the equation proposed in this study becomes an asymptotic curve as the curvature effect increases.     

Determination of soil contamination sources in mining area using Zn/Cd ratios with mobile Cd

Environmental Geochemistry and Health - Paddy fields near metalliferous mining area are sometimes contaminated by tailings or mine water. In the contaminated paddy fields around the abandoned...     

Spatially mixed crops to control the stratified dispersal of airborne fungal diseases

Intraspecific crop diversification is thought to be a possible solution to the disease susceptibility of monocultured crops. We modelled the stratified dispersal of an airborne pathogen population in order to identify the spatial patterns of cultivar mixtures that could slow epidemic spread driven by dual dispersal mechanisms acting over both short and long distances. We developed a model to simulate the propagation of a fungal disease in a 2D field, including a reaction-diffusion model for short-distance disease dispersal, and a stochastic model for long-distance dispersal. The model was fitted to data for the spatio-temporal spread of faba bean rust (caused by Uromyces viciae-fabae) through a discontinuous field. The model was used to compare the effectiveness of eight different planting patterns of cultivar mixtures against a disease spread by short-distance and stratified dispersal. Our combined modelling approach provides a reasonably good fit with the observed data for the spread of faba bean rust. Similar predictive power could be expected for the management of resource-mediated invasions by other airborne fungi. If a disease spreads by short-distance dispersal, random mixtures can be used to slow the epidemic spread, since their spatial irregularity creates a natural barrier to the progression of a smooth epidemic wave. In the context of stratified dispersal, heterogeneous patterns should be used that include a minimum distance between susceptible units, which decreases the probability of infection by long-distance spore dispersal. We provide a simple framework for modelling the stratified dispersal of disease in a diversified crop. The model suggests that the spatial arrangement of components in cultivar mixtures has to accord with the dispersal characteristics of the pathogen in order to increase the efficiency of diversification strategies in agro-ecosystems and forestry. It can be applied in low input agriculture to manage pathogen invasion by intercropping and cultivar mixtures, and to design sustainable systems of land use.     

Comparative study of torrefaction of empty fruit bunches and palm kernel shell

Journal of Material Cycles and Waste Management - This paper describes the effect of torrefaction on the characteristics of empty fruit bunches (EFB) and palm kernel shell (PKS). The torrefaction...     

Analysis and evaluation of chlorinated persistent organic compounds and PAHs in sludge in Korea

The concentrations of 12 POPs listed in the Stockholm convention, chlorophenols (CPs) and PAHs were investigated in sludge samples from wastewater and sewage treatment plants (WWTPs and STPs). The concentrations of PCDD/Fs in the wastewater sludge ranged from 0.189 to 1092 ng-TEQkg(-1) dry wt., and most of the sludge samples had levels below the EU guideline for the land application of PCDD/Fs (<100 ng-TEQkg(-1) dry wt.) except one sample. Co-PCB congeners were analyzed from four WWTPs, with total concentrations ranging from 0.265 to 26.6 ng-TEQkg(-1) dry wt., which were similar to the results obtained from previous studies. The levels of PCDD/Fs and Co-PCBs varied according to the main source of the influent to each WWTP and the paper industry was the main source of these compounds in the sludge due to the chlorine bleaching process. In case of OCPs, HCB and p,p'-DDE were detected at relatively high levels in the sludge samples compared to other target compounds, ranging from 1.30 to 21.5 microg kg(-1) dry wt. and 0.758 to 14.8 microg kg(-1) dry wt., respectively. Different OCP distribution patterns were observed according to sludge types, with HCB and DDTs being dominant in the sludge from WWTPs and STPs, respectively. The total levels of PAHs and CPs ranged from 1.24 to 44.9 mg kg(-1) dry wt. and 0.340 to 3.85 mg kg(-1) dry wt., respectively. The PAHs and CPs were also shown to have various distribution patterns, possibly due to the different wastewater sources to the WWTPs.     

The environmental comparison of landfilling vs. incineration of MSW accounting for waste diversion

This study evaluates the environmental performance and discounted costs of the incineration and landfilling of municipal solid waste that is ready for the final disposal while accounting for existing waste diversion initiatives, using the life cycle assessment (LCA) methodology. Parameters such as changing waste generation quantities, diversion rates and waste composition were also considered. Two scenarios were assessed in this study on how to treat the waste that remains after diversion. The first scenario is the status quo, where the entire residual waste was landfilled whereas in the second scenario approximately 50% of the residual waste was incinerated while the remainder is landfilled. Electricity was produced in each scenario. Data from the City of Toronto was used to undertake this study. Results showed that the waste diversion initiatives were more effective in reducing the organic portion of the waste, in turn, reducing the net electricity production of the landfill while increasing the net electricity production of the incinerator. Therefore, the scenario that incorporated incineration performed better environmentally and contributed overall to a significant reduction in greenhouse gas emissions because of the displacement of power plant emissions; however, at a noticeably higher cost. Although landfilling proves to be the better financial option, it is for the shorter term. The landfill option would require the need of a replacement landfill much sooner. The financial and environmental effects of this expenditure have yet to be considered.     

Some aspects of the life history of the subarctic copepodNeocalanus cristatus (Calanoida) in Sagami Bay,central Japan

A typical subarctic copepod,Neocalanus cristatus, occurred in the mesopelagic layer (500 to 1000 m) in Sagami Bay, central Japan, throughout the year. Specimens were collected from 1982 to 1986. A small number of adult females were distributed from 800 to 900 m only, but no adult males were collected. This species appeared to be abundant in April and August, when intermediate Oyashio water flowed strongly into Sagami Bay. Mean prosome lengths of copepodite stages IV and V and adults were 4.33, 6.87 and 6.87 mm, respectively. The condition factor [wet wt/(prosome length)³ × 100] of copepodite stage V did not vary remarkably, and mean values ranged from 4.7 to 5.0. Prosome length, body weight and condition factor ofN. cristatus collected from Sagami Bay were smaller than those of copepods in the northern North Pacific.N. cristatus transported from the north cannot molt to adult stages (except for those originating in mesopelagic waters) due to the adverse environmental conditions in Sagami Bay; instead, they die in the mesopelagic layer and sink to the bathypelagic layer (1 000 to 1 400 m), close to the bottom. Since nauplii and early copepodite stages did not occur in any season,N. cristatus probably do not reproduce in Sagami Bay.     

Observations of aerosol-bound ionic compositions at Cheju Island,Korea

To investigate the regional cycle of aerosols and their ionic constituents, three field intensive campaigns were conducted during fall and winter of 1997 and spring of 1998. The concentrations of most ionic species were found to decrease significantly across fall, winter, and spring such that the sum for all cation (and anion) species of each season is computed as: 193 > 96 > 73.7 nequiv m(-3) (and 240 > 104 > 51.5 nequiv m(-3)). To examine the fundamental characteristics of aerosol compositions in the study area, we conducted correlation analysis in various manners. The results indicated that the concentrations of major ionic species were strongly affected by some meteorological parameters including wind speed. It was also seen that relative strengths of correlations between important parameters (e.g., between wind speed and most of major inorganic species) maintain close relationships with the factors associated with the air mass origin. In addition, the results of factor analysis indicated the existence of at least three major sources in the study area which include: sea-salt aerosol, secondary aerosol, and organic aerosol component. The springtime occurrence of unexpectedly low concentrations of most ionic constituents is found to sensitively reflect the influence of the inflow of southeasterly winds that prevailed during spring, while it is not common for that season of the year. Because most of those changes are closely tied with the variabilities in the regional circulation patterns for each measurement period, assessment of the ionic composition in concert with the temporal variations of meteorological conditions provided valuable insights into the source signals of different air masses that passed by the study area.