Assessment of thermodynamics performance with sustainable propulsion indicators of a seaplane engine for different temperatures in the same altitude

Seaplanes have become an important tool along with rapidly developing technology in modern transportation for many countries related to sea. Considering the environmental evaluation for these aircraft, decreasing fossil fuels consumption and energy efficiency are important points for sustainability. For this purpose, in this study, first, the energy and exergy analyses based on the real data of a turboprop engine used in seaplane taken as the reference were performed. Then, new indicators developed for the sustainable propulsion index were examined and evaluated separately. The analyses were made for an altitude of 9000 ft and three different dead state temperatures of ?33°C, ?3°C, and 27°C. According to the analyses, while the average energy efficiencies were found to be 34.7%, 37.8%, and 40.7%, the average exergy efficiencies were found to be 19.24%, 21.25%, and 23.20%, respectively. In addition, the improvement potential due to irreversibility and entropy production for each case was also calculated and the results of the sustainable emission index were found to be very low. At the end of the study, the results were evaluated and some suggestions for the effective use of energy in the seaplanes were made.     

Heavy Metal Levels in Biota and Sediments in the Northern Coast of the Marmara Sea

Concentration of Cd, Co, Cr, Ni, Zn, Fe, Mn, Pb and Cu were determinedin biota and sediment samples collected from the Marmara Sea in Turkey. The levels of Zn, Fe, Mn, Pb and Cu in the macroalgae are higher than previous studies in the Marmara Sea. Moreover, Cu and Zn concentrations at the present study are significantly high than Bosphorus and Black Sea algae. The order heavy metal concentrations in the mussel samples was: Fe > Zn > Ni > Mn > Cu > Pb > Cr > Cd > Co. The metal concentrations are generally lower when compared with the Black Sea mussels except Pb. At the same time, concentrations of Pb, Cu and Zn in the mussel species are lower when compared with the results in the Aegean Sea. The ranges of Mn and Cu in the tested fish samples are higher than Black Sea fish. On the other hand, Cd, Co, Cr, Zn and Pb concentrations are lower. The northern coast of the Marmara Sea having the highest metal concentrations in sediments as follows: Co, Cr, Ni, Fe at ?arköy ; Pb, Cu at M. Ere?li; Cd, Zn, Mn at Menek?e. The heavy metal levels in the sediment samples are lower than other areas in the Marmara Sea.     

Energy recovery from municipal solid waste in Nigeria and its economic and environmental implications

An assessment of potential biomass resources in Nigeria for the production of methane and power generation is presented in this paper. Nigeria, as an underdeveloped and populous country, needs an uninterrupted source of energy. The country's energy problems have crippled large sectors of the economy. The percentage of people connected to the national grid is 40%. These 40% experience electricity supply failure on average 10–12 hours daily. Energy generation from municipal solid waste (MSW) is an effective MSW management strategy. Yearly waste generation has increased from 6,471 gigagrams (Gg) in 1959 to 26,600 Gg in 2015. This amount is projected to reach 36,250 Gg per year by 2030. Methane emission for 2015 was 491 Gg, and it is projected to reach 669 Gg in 2030. These values translate to 3.48 × 10⁹ kilowatt hours (kWh) of electricity for 2015, with a projected 4.74 × 10⁹ kWh by 2030. The revenue to be derived from the electricity that is generated could have been US$365.04 × 10⁶ for 2015, and it is estimated that it will reach US$473.82 × 10⁶ by 2030. It was found that methane emissions from MSW increased with time, and capturing this gas for energy production will lead to a sustainable waste management.     

Correction to: Sustainable development goals assessment of Erzurum province with SWOT‑AHP analysis

Environment, Development and Sustainability -     

A method to assess soil erosion from smallholder farmers’ fields

Soil erosion by water is a major threat to sustainable food production systems in Africa. This study presents a qualitative soil erosion assessment method that links the number of broken ridges (NBRS) observed on a smallholder farmer’s field after a rain event to factors of soil erosion (e.g., rainfall intensity, slope steepness, crop canopy height, and conservation practice) and to soil loss data measured from a runoff plot and receiving small streams. The assessment method consists of a rapid survey of smallholder farmers combined with field monitoring. Results show an indirect relationship between NBRS and factors of soil erosion. Results also show a direct relationship between NBRS and suspended sediment concentrations measured from an experimental runoff plot and receiving streams that drain the sub-watersheds where farmers’ fields are located. Given the limited human and financial resources available to soil erosion research in developing countries, monitoring NBRS is a simple, cost-effective, and reliable erosion assessment method for regions where smallholder farmers practice contour ridging.     

Assessing Mn, Fe, Cu, Zn, and Cd pollution in bottom sediments of Wadi Al-Arab Dam, Jordan

Thirty five bottom sediment samples were collected in a grid pattern from Wadi Al-Arab Dam. The present study focuses on the levels of Mn, Fe, Cu, Zn, Cd, total organic matter (TOM) and carbonate content (CO(3)(-2)) in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of the dam. Concentration data were processed using correlation analysis and factor analysis. The results of correlation analysis and factor analysis show low positive and negative correlations among Mn, Fe, Cu, Zn, Cd, TOM, and CO(3)(-2) and indicate that heavy metals in sediments of Wadi Al-Arab have different anthropogenic and natural sources. The results also confirm the complicated behavior of these pollutants, that can be influenced by many factors. Sediments pollution assessment was carried out using enrichment factor and the geoaccumulation index. The calculation of enrichment factors showed that Mn and Cu are depleted by 0.76, and 1.33, respectively, whereas Cu, Zn, and Cd are enriched by 3.6, and 30, respectively. The results of geoaccumulation index reveal that sediments of Wadi Al-Arab are uncontaminated with Mn, Fe, and Cu, moderately contaminated with Zn, and strongly to extremely contaminated with Cd. Some of the elevated concentration of Zn and Cd are probably due to anthropogenic sources nearby the dam site. These sources mainly include fertilizers and pesticides used in agricultural activities, and the effluent of Irbid City treatment plant. Environmental risks of Cd and Zn were evaluated using the risk assessment code (RAC) and sequential extraction method. Zn poses a low environmental risk, whereas Cd poses a medium environmental risk.     

DNA damage effect of cyprodinil and thiacloprid in adult zebrafish gills

Cyprodinil and thiacloprid are two of the most commonly used pesticides in Turkey. It is more likely to reach humans or animals due to their widespread use. This study aims to investigate whether there is a DNA damage risk due to cyprodinil and thiacloprid exposure. Zebrafish, which is used as a model organism in health and environmental research, and comet assay were chosen to demonstrate this damage. Ten zebrafish per group were exposed to 2 different concentrations for each pesticides (0.31 and 0.155 mg/L for cyprodinil and 1.64 and 0.82 mg/L for thiacloprid) for 21 days. After, gills were excised and comet assay was performed. Photos of an average of 50 cells per slide were taken and were analyzed with visual evaluation program. DNA damage was found to be increased in the 0.31 mg/L cyprodinil, 0.82 mg/L thiacloprid, and 1.64 mg/L thiacloprid treatment groups when compared to the control group (p < 0.001). Average tail DNA percentage parameter values were 9.45 ± 0.51, 10.30 ± 0.34, 11.17 ± 0.33, and 2.47 ± 0.06 respectively. Cyprodinil and thiacloprid were identified as genotoxic agents that should be investigated further.

     

Enhancing Hyrdological Simulation Program – FORTRAN Model Channel Hydraulic Representation1

Abstract: The hydrological simulation program – FORTRAN (HSPF) is a comprehensive watershed model that employs depth‐area‐volume‐flow relationships known as the hydraulic function table (FTABLE) to represent the hydraulic characteristics of stream channel cross‐sections and reservoirs. An accurate FTABLE determination for a stream cross‐section site requires an accurate determination of mean flow depth, mean flow width, roughness coefficient, longitudinal bed slope, and length of stream reach. A method that uses regional regression equations to estimate mean flow depth, mean flow width, and roughness coefficient is presented herein. FTABLES generated by the proposed method (Alternative Method) and FTABLES generated by Better Assessment Science Integrating Point and Nonpoint Sources (BASINS) were compared. As a result, the Alternative Method was judged to be an enhancement over the BASINS method. First, the Alternative Method employs a spatially variable roughness coefficient, whereas BASINS employs an arbitrarily selected spatially uniform roughness coefficient. Second, the Alternative Method uses mean flow width and mean flow depth estimated from regional regression equations whereas BASINS uses mean flow width and depth extracted from the National Hydrography Dataset (NHD). Third, the Alternative Method offers an option to use separate roughness coefficients for the in‐channel and floodplain sections of compound channels. Fourth, the Alternative Method has higher resolution in the sense that area, volume, and flow data are calculated at smaller depth intervals than the BASINS method. To test whether the Alternative Method enhances channel hydraulic representation over the BASINS method, comparisons of observed and simulated streamflow, flow velocity, and suspended sediment were made for four test watersheds. These comparisons revealed that the method used to estimate the FTABLE has little influence on hydrologic calibration, but greatly influences hydraulic and suspended sediment calibration. The hydrologic calibration results showed that observed versus simulated daily streamflow comparisons had Nash‐Sutcliffe efficiencies ranging from 0.50 to 0.61 and monthly comparisons had efficiencies ranging from 0.61 to 0.84. Comparisons of observed and simulated suspended sediments concentrations had model efficiencies ranging from 0.48 to 0.56 for the daily, and 0.28 to 0.70 for the monthly comparisons. The overall results of the hydrological, hydraulic, and suspended sediment concentration comparisons show that the Alternative Method yielded a relatively more accurate FTABLE than the BASINS method. This study concludes that hydraulic calibration enhances suspended sediment simulation performance, but even greater improvement in suspended sediment calibration can be achieved when hydrological simulation performance is improved. Any improvements in hydrological simulation performance are subject to improvements in the temporal and spatial representation of the precipitation data.