Characterization of chlorine and heavy metals for the potential recycling of bottom ash from municipal solid waste incinerators as cement additives

Bottom ash is an inevitable by-product from municipal solid waste (MSW) incineration plants. Recycling it as additives for cement production is a promising disposal method. However, the heavy metals and chlorine are the main limiting factors because of the potential environmental risks and corrosion of cement kilns. Therefore, investigating heavy metal and chlorine characteristics of bottom ash is the significant prerequisite of its reuse in cement industries. In this study, a correlative analysis was conducted to evaluate the effect of the MSW components and collection mode on the heavy metal and chlorine characteristics in bottom ash. The chemical speciation of insoluble chlorine was also investigated by synchrotron X-ray diffraction analysis. The results showed that industrial waste was the main source of heavy metals, especially Cr and Pb, in bottom ash. The higher contents of plastics and kitchen waste lead to the higher chlorine level (0.6 wt.%–0.7 wt.%) of the bottom ash. The insoluble chlorine in the MSW incineration bottom ash existed primarily as AlOCl, which was produced under the high temperature (1250°C) in incinerators.

Open image in new window

     

Organochlorine and organotin compounds in Caspian seals (Phoca caspica) collected during an unusual mortality event in the Caspian Sea in 2000

Polychlorinated biphenyls (PCBs), organochlorine pesticides and organotin compounds were determined in the blubber and liver of Caspian seals (Phoca caspica) found stranded on the coast of the Caspian Sea during an outbreak of canine distemper virus (CDV) in 2000. Among organochlorines analyzed, DDTs were the most dominant contaminants with concentrations ranging from 6.3 to 470 microg/g on a lipid-weight basis. Caspian seals collected in 2000 during the epizootic had higher concentrations of organochlorines than healthy individuals sampled in 1998. However, the blubber layer was generally thinner in the seals collected in 2000 than those in the previous surveys. Although compositions of organochlorine pesticides in seals suggested that the contamination status in the Caspian Sea is improving, the levels found in Caspian seals in 2000 were comparable to those in other marine mammals that have suffered from epizootics. This implies that the present status of contamination found in Caspian seals poses a risk of immunosuppression. Concentrations of butyltin compounds in livers of seals ranged from 0.49 to 17 ng/g on a wet-weight basis and octyltin compounds were below limit of detection in all the samples analyzed, suggesting less contamination by organotin compounds in the Caspian Sea.     

Atmospheric NO2 and CO concentration in Lima,Peru

The atmospheric concentration of NO2 in Lima, Peru was measured through 1 year using passive samplers. The concentration was stable and evident seasonal change was not observed. Also, the distribution of NO2 concentration in entire Lima was monitored twice in different seasons. The average NO2 concentrations at 33 and 27 sites of these monitoring were 17.1 and 15.3 ppb, respectively. NO2 distribution was high in the downtown area and decreased gradually with distance from there. The wind that almost always blew from the ocean had a great influence on it. High NO2 level and the change of CO concentration suggest that the residential area in the northeast side forms a topological channel among hills to blow out the pollutants from the downtown area.     

Determination of dissolved oxygen limitation in aerobic biofilm reactors

The concentration of dissolved oxygen (DO) strongly influences the performance of aerobic biofilm reactors because organic oxidation is limited by the availability of oxygen. However, it is not necessary to maintain a high DO level in the reactors in order to overcome this limitation. Excessive aeration wastes energy. Therefore, the determination of the onset of DO limitation against organic substrate removal in aerobic biofilm reactors is important for their effective operation. This study is aimed at developing an expression to determine the onset of DO limitation and hence to control the aeration system. The expression developed is as follows: , where S_b and C_b are the bulk concentrations of organic substrate and DO, respectively; D_ws and D_wc are the diffusion coefficients of organic substrate and oxygen in the reactors respectively; and R_b is an overall ratio of oxygen consumption to organic substrate removal in the reactors. The latter is the key parameter in the equation, and is determined by the characteristics of the substrate, biofilm, and reactor. In order to measure the value of R_b, the authors have developed a micro-biofilm reactor. The value of R_b was determined to be 0.13 (mg O₂ mg⁻¹ COD_cr) for glucose removal with this reactor. The equation has, subsequently, been verified with data from batch and continuous experiments.     

Effect of Poly(dioxolane) as Compatibilizer in Poly(ɛ-caprolactone)/Tapioca Starch Blends

The influence of poly(dioxolane) (PDXL), a poly(ethylene oxide-alt-methylene oxide), as compatibilizer on poly(ɛ-caprolactone) (PCL)/tapioca starch (TS) blends was studied. In order to facilitate blending; PCL, PDXL and TS must be blended together directly; so that PDXL is partially adhered at the TS surface as shown by scanning electron microscopy. The molecular weight effect of PDXL on the PCL/TS blends showed that mechanical properties of PCL/TS/PDXL blends from low molecular weight (M _n=10,000) and high molecular weight (M _n=200,000) PDXL were rather dependent on TS content. The enzymatic degradability of PCL/TS/PDXL blends using α-amylase increased as the TS content increased but was independent on the dispersion of tapioca starch in the PCL matrix.     

Biparental defence in a spider mite (Acari: Tetranychidae) infesting Sasa bamboo

Summary Field observations on the nesting pattern of Schizotetranychus celarius (Banks) (Acari: Tetranychidae) revealed that many individuals live gregariously in a united nest. Behavioural experiments recorded on video tape recorder and 16 mm film showed that adult males and females can effectively defend their nest and offspring from a phytoseiid predator, larvae of Typhlodromus bambusae Ehara (Acari: Phytoseiidae), through counterattacks. The male spider mite often killed the predator's larva and succeeded in defending offspring and nest completely. Comparison of the behaviour patterns recorded between a nest owner parent S. celarius and two kinds of intruders (predators and conspecific males or females) revealed conspicuous differences. I suggest that there is a kind of biparental care in S. celarius, and that the life-pattern of this species therefore fits the definition of subsociality originally framed for insects.     

Electrolytic aminated carbon materials for the electrocatalytic redox reactions of inorganic and organic compounds

Some kinds of amine groups can be introduced to the glassy carbon surface by the electrode oxidation of the carbon electrode surface in ammonium carbamate solution, and this amine groups modified electrode is named as an aminated glassy carbon electrode. The existences of not only primary amine but also secondary and tertially amines were confirmed by X ray photoelectron spectroscopy. The applications of the aminated carbon material for the electrocatalytic reductions of oxygen, hydrogen peroxide, and organic compounds such as quinones were carried out, and the effects of amination on the formation of electrocatalytic sites for many species were revealed. The electrocatalyzed cyclic voltammograms of metal ions and metal chelate compounds obtained by aminated glassy carbon electrodes are also discussed. Moreover, we intend to describe that the aminated carbon electrode can exhibit the large reduction waves of inorganic oxoacids such as N0₂? or bromide ion. The introduced functional groups containing nitrogen atom can change the distribution of the electron densities of the graphite carbon surface, and this specific electron distribution environment may generate the various electrocatalytic activities.     

Feasibility Study of Airbag Concept Applicable to Motorcycles Without Sufficient Reaction Structure

Objectives: An airbag system for motorcycle applications was developed and marketed in 2006 followed by many research projects on the system. In the airbag system, the bag should be supported during the kinetic energy–absorbing period of a rider in a collision. The previously developed system employed a configuration in which motorcycle structures support the airbag, such as a gauge unit and/or a steering structure. The supporting structure functions to receive the reaction force to hold the airbag during a crash to properly absorb the rider's kinetic energy. However, the previous system requires a larger area for this reaction structure and is applicable only to the motorcycles that can provide that area. To overcome this limitation, we propose an airbag system employing another concept. In this concept, the airbag does not use its vehicle structures as a reaction structure but uses the structures of an opposing vehicle, such as doors and/or pillars of an opposing vehicle. In this project, we aim to verify the effectiveness of the proposed system when installed in a motorcycle that cannot provide a larger area for the reaction structure.

Methods: In the system with this concept, it is assumed that the occupant protection performance is largely affected depending on impact configurations. Accordingly, full-scale motorcycle-to-car crash tests using 125 cm³ scooter-type models with and without the proposed system were conducted in various impact configurations. The 7 impact configurations specified in ISO 13232 were selected as the test configurations. Injury variables and injury indices of head, neck, chest, and abdomen were evaluated with the motorcyclist dummy.

Results: Injury variables and indices obtained from the crash tests with the airbag were compared to those of the baseline tests. In 2 impact configurations, the airbags were supported by the side structures of the opposing vehicle and performed to reduce the injury variable of head and/or chest compared to that of the baseline test.

Conclusion: Through the crash tests, beneficial protection effects of the airbag system were confirmed in particular impact configurations. No significant risk for the occupant due to the airbag was observed in the conducted crash tests. It was concluded that the proposed airbag system has feasibility to reduce rider injury in a collision of a motorcycle without sufficient reaction structure.