Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Cu fractions, mobility and bioavailability in soil-wheat system after Cu-enriched livestock manure applications

Fertilization of crops with livestock manure (LM) is a common waste disposal option, but repeated application of LM containing high concentrations of heavy metals such as Cu could lead to crop toxicity and environmental risk. To examine the Cu availability and uptake by wheat in a Mollisol affected by Cu-enriched LM, pot experiments were conducted. LM (376 mg kg⁻¹ Cu originally) was spiked with different concentrations of Cu (0, 100, 200, 400, 600 and 800 mg kg⁻¹ soil, added as CuSO₄) to simulate soil Cu contamination by LM application. The results indicated that Cu was predominately distributed in organic bound fraction, while the most drastic increase was found in reducible fraction. Acid-extractable fraction played a more important role than other fractions in controlling the mobility and bioavailability of Cu. DTPA-extractable Cu may overestimate the Cu bioavailability since DTPA solution could extract soluble and part of stable forms. The application of LM at 1% level significantly decline the Cu mobility, but that at 3% level exhibited the opposite effect.Although the quantities of Cu in wheat was very low compared with the accumulation in soil, Cu concentrations in roots increased evidently from 12 to 533 mg kg⁻¹ and that in aerial parts were in a narrow range from 12.1 to 32.7 mg kg⁻¹, indicating the more sensitivity of roots to the Cu toxicity. The Cu concentrations in grains after 3% manure application did not approach the threshold for Cu toxicity (<20 mg kg⁻¹) even at higher Cu addition rates.     

Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region

A precise estimate of polarization induced by surface is crucial for polarized remote sensing dedicated to monitoring aerosol properties over urban area. The accurate knowledge of interaction between surface and aerosol polarized reflectance is essential for accurately achieving aerosol properties. In order to study surface and aerosol polarized reflectance for aerosol retrievals over urban area, a new airborne directional polarimetric camera (DPC) with high spatial resolution (4 m at 4000 m a.g.l) was developed. The surface polarized reflectance over distinct surface covers of urban area (forest, shrub, and soil) were studied using DPC measurements during a field campaign in the Pearl River Delta (PRD), China. The large variations were found in surface polarized reflectance of distinct urban covers due to surface type variability. For all surface types, the empirical BPDF model cannot describe accurately surface polarized reflectance at all possible illumination and observation geometries. From the quantitatively study of relationship between surface and aerosol polarized contribution to DPC measurements, we show that the polarized contributions of aerosol, which optical properties were defined by ground-based measurements, are much larger than the polarized contribution of surface, and found that the polarized contribution of surface covers increases with decreasing NDVI. The effect of polarization accuracy of measurements on aerosol retrieval was also investigated using DPC measurements, and found that 0.1% polarization accuracy of measurements can be neglected when AOD is retrieved using polarized measurements. Based on the information of effects of polarized reflectance differences between distinct surface covers and polarization accuracy of polarized measurements on retrieved aerosols over urban area, we found that the accuracy of aerosol retrieval over forest covers is higher than other surface types using polarized remote sensing.     

Cosmic exergy based ecological assessment for a wetland in Beijing

Wetlands research and restoration has become one of the critical concern due to their importance in providing ecosystem services. This study proposes a holistic methodology to assess the wetland ecosystem based on cosmic exergy as a thermodynamic orientor. This new approach is applied to two typical wastewater treatment facilities (an activated sludge system and a cyclic activated sludge system) and to a constructed wetland ecosystem in Beijing for comparison. Results show that the Beijing wetland ecosystem gains positive net present ecological value of 3.08E+14 J_c regarding its total life cycle. Comparison with the activated sludge system and cyclic activated sludge system, shows that the wetland ecosystem has greater dependencies on local resources (22% vs. 0% vs. 0%) and renewable resources (67% vs. 38% vs. 31%) as well as a larger ecological sustainability index (0.64157 vs. 0.00005 vs. 0.00008). This implies that the wetland ecosystem is more environmentally friendly and sustainable method for water treatment.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Mobility of acid-treated carbon nanotubes in water-saturated porous media

The production, use, and disposal of nanomaterials may inevitably lead to their appearance in water. With the development of new industries around nanomaterials, it seems necessary to be concerned about the transport of nanomaterials in the environment. In this paper, the transport of acid-treated carbon nanotubes (CNTs) in porous media was investigated. Before the mobility investigation, the stability of acid-treated CNT dispersions was studied using ultraviolet-visible spectra and it was indicated that, under the chemical conditions employed in this work, there was no apparent aggregation. The mobility investigation showed that transport of acid-treated CNTs increased with treatment time due to increase in particle zeta potential. Carbon nanotubes treated with nitric acid for 2, 6, and 12 h possessed measured zeta potentials of -30.0, -43.0, and -48.5 mV, respectively. Utilizing clean-bed filtration theory, we showed that acid-treated CNTs have the potential to migrate 3.28, 5.67, and 7.69 m in saturated glass beads, respectively. We showed that solution ionic strength and pH have important effects on the mobility of acid-treated CNTs. Increasing the pH from 6.0 to 7.9 resulted in an increase in migration potential from 2.96 to 10.86 m. Increasing the ionic strength from 0.005 to 0.020 M resulted in a decrease in CNT migration potential from 5.67 to 1.42 m.     

Environmental impacts of the shelter forests in Horqin Sandy land, northeast China

Assessing environmental effects of shelter forests is primarily necessary for realizing their greatest protective benefits. The Three-North Shelter Forest Program (TNSFP), the largest ecological afforestation program in the world, has been operated for three decades in China but so far lacks comprehensive assessment of its environmental impacts. Horqin Sandy Land (HSL) in Northeast China is one of the key areas in the TNSFP implementation. To identify the principal contributors to environmental changes in HSL, we evaluated impacts of variations in landscape features, shelter forest areas, climatic factors, and social factors on changes in sandy land areas from 1978 to 2007, by using Gray Relational Analysis. Our analysis showed that during the period 1978 to 2007, the sandy land area decreased by 3.9% in low aeolian dunes, 14.5% in low mountains and hills, and 98.9% in high elevation alluvial flats of HSL. Factors with Gray Correlation Degrees >0.9 were identified as the patch shape index (PSI) and the landscape isolation index (LII) of grasses in low aeolian dunes, PSI of grasses in mountains and hills, and area of broadleaved forests and LII of shrubs in alluvial flats. It is concluded that establishment of the shelter forests has played a significant role in controlling the expansion of sandy land in HSL. To sustain the long-term environmental benefits of the shelter forests in the remaining period for TNSFP construction, suitable tree species should be selected and planted at appropriate densities based on the local precipitation, groundwater and landform conditions, and the system stability of the total landscape.     

Emergy evaluation and economic analysis of three wetland fish farming systems in Nansi Lake area,China

Emergy and economic methods were used to evaluate and compare three fish production models, i.e., cage fish farming system, pond intensive fish rearing system and semi-natural extensive pond fish rearing system, in Nansi Lake area in China in the year 2007. The goal of this study was to understand the benefits and driving forces of selected fish production models from ecological and economic points of view. The study considered input structure, production efficiency, environmental impacts, economic viability and sustainability. Results show that the main difference among the three production systems was the emergy cost for fish feed associated with their feeding system, i.e., feeding on natural biomass such as plankton and grass or on commercial feedstock. As indicated by EYR, ELR and ESI, it can be clearly shown that the intensive production model with commercial feed is not a sustainable pattern. However, the point is that more environmentally sound patterns do not seem able to provide a competitive net profit in the short run. The intensive pond fish farming system had a net profit of 2.57E+03 $/ha, much higher than 1.27E+03 $/ha for cage fish farming system and slightly higher than 2.37E+03 $/ha for semi-natural fish farming system. With regard to the drivers of local farmer’s decisions, the accessibility of land for the required use and investment ability determine the farmer’s choice of the production model and the scale of operation, while other factors seem to have little effect. Theoretically, the development of environmentally sustainable production patterns, namely water and land conservation measures, greener feed as well as low waste systems is urgently needed, to keep production activities within the carrying capacity of ecosystems. Coupled emergy and economic analyses can provide better insight into the environmental and economic benefits of fish production systems and help solve the problems encountered during policy making.     

Direct on-filter assay of subtilisin-type proteolytic enzymes for rapid analysis of analyte captured from the workplace atmosphere

A simple assay for some proteolytic enzymes has been developed which can be performed directly on the surface of a cellulose nitrate filter used to capture the analyte during workplace monitoring for health and safety purposes. Following air sampling the analysis is performed on the filter which is retained within the air sampler. This involves two steps: first, a 15 min incubation in which the captured enzyme is dissolved and then digests an alkaline-phosphatase-labelled antibody immobilised as a small dot on the surface of the filter; and second, is a 10 min incubation with substrate solution, which follows an in situ wash under a vacuum. During the incubation colour develops on the spot at the location of the immobilised enzyme antibody conjugate. The intensity of the spot can be assessed visually within the sampler to ascertain the presence or absence of captured enzyme, or alternatively quantitative results can be obtained using an optical scanner. The limit of detection is 5 ng per filter for subtilisin (20 ng for visual discrimination between this standard and the zero). The assay is stable to the effects of ambient air sampling at 31 min(-1) for 18 h.