Pesticides in precipitation in the Gdańsk region (Poland)

Selected organonitrogen, organophosphorus and organochlorine pesticides have been determined in precipitation samples collected at 10 sites in the Gdańsk region (northern Poland) over a period of one year (1998). Compounds which were detected most often included simazine (0.11-5.80 ng/l), fenitrothion (0.1-2.10 ng/l), chlorfenvinfos (0.1-1.30 ng/l), gamma-HCH (0.012-5.06 ng/l), heptachlor epoxide (0.05-3.28 ng/l) and aldrin (0.02-3.28 ng/l). The pesticide concentrations in precipitation samples revealed seasonal fluctuations, with higher concentrations observed during the application periods (June and July). The concentrations observed were also affected by the inflow of polluted air masses from the southwest. The total pesticide concentration in the precipitation samples was strongly related to the abundance of green areas in the vicinity of the sampling sites. A weak correlation was also found between the total concentration of organonitrogen and organophosphorus pesticides, and the total concentration of organochlorine pesticides in the samples collected.     

Photocatalytic activity of TiO2 films grown on different substrates

Titanium dioxide films were prepared on glass, indium-tin oxide (ITO) glass and p-type monocrystalline silicon and studied for the photocatalytic degradation of rhodamine B in an aqueous medium. Raman, AFM, and XPS spectroscopic investigations of these films indicated that microstructure of titanium oxide films were greatly affected by the substrate materials. Rutile was confirmed to be easily formed on the surface of ITO glass, and TiO2 tended to grow as closely packed particles that were elongated strips with an average size of 20 nm, and had lovely contrast with the perfectly round particles grown on p-type monocrystalline silicon. Charge transfer between the film and silicon substrate was verified by surface photovoltage spectra. This may be the real reason why the films grown on ITO glass and silicon substrates exhibit higher photocatalytic reactivity than the film on glass substrate. Moreover, the different surface properties also seem to be responsible for the different activity.     

Copper contamination in paddy soils irrigated with wastewater

Copper (Cu) contamination was investigated in paddy soils where Cu-rich wastewater (12 mg Cu/l) was used for irrigation. The results showed that Cu contamination increased the soil Cu content from 17.0 mg Cu/kg in the non-wastewater irrigated soils (NWIS) to 101.2 mg Cu/kg in the wastewater irrigated soils (WIS), and Cu accumulated mostly in the surface layer (0-10 cm) of the paddy soil. The average Cu contents in brown rice, rice hull and rice straw from NWIS were 1.4, 7.3 and 14.5 mg Cu/kg, while those from WIS were 15.5, 133.2, and 101.4 mg Cu/kg, respectively. Correlation analysis revealed that the relationship between the Cu content in the rice straw and the rice hull with the total Cu content of the soil could be described by an exponential function (R2 = 0.921 and 0.831, respectively; P <0.01). Rice plants grown in the WIS showed symptoms of black roots, less effective tiller, etc. Subsequently, the rice yield decreased by 18-25%, compared with that grown in NWIS.     

Effects of metabolites of benzo(a)pyrene on unschedule DNA synthesis in BALB/3T3 cell line

In order to explore the damage from metabolites of benzo(a)pyrene on DNA of mammalian cells, the effects of four metabolites of benzo(a)pyrene (anti-BPDE, syn-BPDE, 3-OH-BP and 9-OH-BP) on synthesis of DNA and unschedule DNA synthesis (UDS) in BALB/3T3 cells were assayed, by methods of single-labeling and double-labeling. The results showed that all of the four agents were able to increase the synthesis of DNA, but only three of them (apart from syn-BPDE) induced UDS in BALB/3T3 cells. The above indicates that the metabolites of benzo(a)pyrene are able to damage DNA in BALB/3T3 cells, and that this effect may be relative to the sterical structure of metabolites of benzo(a)pyrene.     

Bioaccumulation and physiological effects of excess lead in a roadside pioneer species Sonchus oleraceus L

Seedlings of Sonchus oleraceus L. were transplanted to soil supplied with lead acetate at dosages of 0, 800, 1600 and 3200 mg kg(-1) DW. Measures of chlorophyll content, peroxidase (POD) activity, shoot length, biomass and Pb content in the plant tissues were obtained from the experimental plants. With increasing amounts of Pb in the soil, the chlorophyll content, shoot length and biomass decreased, while POD activity and Pb content in the plant tissues increased. At 3200 mg kg(-1) Pb treatment, Pb content in the plant leaf, stem and root were 65.67, 149.82 and 1113.24 mg kg(-1), respectively. Only at 3200 mg kg(-1) Pb treatment did chlorophyll content, shoot length and biomass significantly increase by 18, 15 and 44%, respectively, while POD decreased by 39% over the control. The potential of applying this species in phytoremediation of Pb contaminated roadside soils and thus restoration of the roadside vegetation are discussed.     

Distribution of metals in grassland soils following surface applications of sewage sludge

In order to decide on a suitable sampling depth for grassland soil treated with sewage sludge and to assess implications for grazing animals, a field trial on two soils was designed to estimate the distribution of metals in grassland soil profiles following surface applications of sludge. Thus the sites represented permanent grassland where no form of cultivation had taken place. Soil cores were taken using specialised equipment to 30 cm depth and divided into seven sections. Movement from the soil surface to a depth of 10 cm was observed for all of the seven metals, Cd, Cr, Cu, Mo, Ni, Pb and Zn, but most of the metal (60%-100%, mean 87%) remained in the upper 5 cm of soil. It was concluded that sampling to a depth of 5 or 7.5 cm would be most suitable for monitoring long-term grassland treated with surface applications of sludge.     

Studies on water hyacinth as a biological filtre for treating contaminants from agricultural wastes and industrial effluents

The aquatic weed--water hyacinth [Eichhornia crassipes (Mart) Solms] showed a remarkable capacity to withstand the effects of pH changes ranging from 5 to 8 in the aquatic environment. Growth continued to be normal except when placed for longer periods in medium containing iron ions at pH 3.3. The ability of this plant to neutralize some very acid solutions of heavy metals such as salts of copper, cadmium and zinc individually and in combinations, is being reported. Plants placed in pure acid and alkali solutions were also able to neutralize the medium. Calcium appears to play an important role in the mechanism involved in the adaptability of these plants to such environments.     

A comparative study on the biosorption characteristics of some yeasts for Remazol Blue reactive dye

Biosorption capacities and rates of different kinds of dried yeasts (Saccharomyces cerevisiae, Schizosaccharomyces pombe, Kluyveromyces marxianus, Candida sp., C. tropicalis, C. lipolytica, C. utilis, C. quilliermendii and C. membranaefaciens) for Remazol Blue reactive dye from aqueous solutions were compared under laboratory conditions as a function of initial pH and initial dye concentration. Optimum initial biosorption pH was determined as 2 for all the yeasts. All the yeast species showed comparable and very high dye sorption at 100 mg/l initial dye concentration. The equilibrium sorption capacity of the biomass increased with increasing initial dye concentration up to 400 mg/l for Candida sp. C. lipolytica and C. tropicalis; up to 300 mg/l for C. quilliermendii and C. utilis and up to 200 mg/l for S. cerevisiae, S. pombe, K. marxianus and C. membranaefaciens while the adsorption yield of dye showed the opposite trend for all the yeasts. Among the nine yeast species, C. lipolytica exhibited the highest dye uptake capacity (Q(0) = 250 mg/g). Both the Freundlich and Langmuir adsorption models were found suitable for describing the biosorption of the dye by all the Candida yeasts (except C. membranaefaciens). The results indicated that the dye uptake process followed the pseudo-second-order kinetics for each dye-yeast system.     

Sample purification for analysis of organochlorine pesticides in sediment and fish muscle

The methods of sample purification for determinations of organochlorine pesticides (OCPs) in sediment and fish muscle were investigated in this study. A two-step procedure with preliminary cleanup and florisil column fraction was adopted. The working conditions of florisil column were firstly optimized. As to preliminary cleanup, liquid-liquid extraction by mixture of dimethyl formamide (DMF) and hexane and sulphonation by concentrated sulfuric acid were applied respectively and compared for the studied samples. The results indicated that liquid-liquid distribution could effectively separate lipids from fish muscle extracts, while failed in elimination of chlorophyll extracted from the relicts of hydrophytes in the sediment sample. In view of the sample appearance and clarity of gas chromatogram, sulphonation was more suitable to purify the sediment sample, however, the recoveries of the spiked standards were poor. The use of eluting solvent with stronger polarity could improve the corresponding recoveries significantly. Due to complete loss of Dieldrin, Endrin, and Endrin aldehyde after sulphonation, this pretreatment was improper to the three components. Sulfur, as the particular disturbing element in sediment, could be removed sufficiently by addition of activated copper powder. The relevant detection limits of the selected methods for OCPs in the studied substrates were also provided.