An environmental forensic investigation at a bio-medical waste treatment and disposal facility in Kerala,India

Indian statutes identify twelve different types of biomedical wastes and give the treatment and disposal options for each. Since it is not possible for every generator of biomedical waste to go for their own treatment and disposal facility, the small-scale generators take the service of centralized treatment and disposal facilities available to them on payment. In the state of Kerala in India, where the basic health indicators match those of many developed countries, the centralized biomedical waste treatment facility is run by Indian Medical Association (IMA), Kerala, under the banner IMAGE (IMA Goes Eco-Friendly) at a place called “Kanjikode” in the Palakkad District. The facility receives biomedical waste from around 4500 hospitals across the State and an equal number of medical laboratories. The plant incinerates the incinerable waste and the other kind of waste are disinfected and decontaminated. The residual ash and dried sludge are then moved to the landfill area. Recently, the facility was in the middle of a controversy due to the alleged health hazards it posed to the surrounding population. An environmental forensic investigation was carried out at the site to establish the merits of the allegation. The reported study is a part of the investigation where groundwater was analysed for the presence of heavy metals. As the biomedical waste contain heavy metals like Zn, Pb, Cd, Cr, and Hg, the presence of these were analysed to establish contamination of groundwater by the facility. The study area is bounded by Malampuzha dam and Korayar river. Groundwater contaminant transport modelling was done for a 3430 m × 3960 m area surrounding the waste treatment facility using Visual MODFLOW and MODPATH. Ground water flow direction and particle pathlines were computed to track the movement of contaminants. Groundwater samples were collected from the area shown to be polluted by the model, if metals were discharged by the facility, and also from outside this area. Water samples were collected conforming to the guidelines in the “Pollution Crime Forensic Investigation Manual” published by INTERPOL. The collected water samples were tested for heavy metal concentration using atomic absorption spectroscopy (AAS). The water sample analysis showed that the groundwater is not contaminated by heavy metal discharge from the biomedical treatment facility.     

Solid phase microextraction applied to the analysis of organophosphorus insecticides in fruits

Trace amounts of organophosphorus pesticides (OPs) were determined in various fruits by headspace solid phase microextraction (HS-SPME) and gas chromatography–nitrogen phosphorous detection (GC-NPD). Sampling from the headspace enhanced method selectivity, whereas at the same time improved fiber life time and method sensitivity. Diazinon, parathion, methyl parathion, malathion and fenithrothion were determined in various fruits: more than 150 samples of 21 types of fruits were studied. SPME-GC-NPD provided a useful and very efficient analytical tool: method linearity ranged from 1.2 to 700 ng/ml. Limits of detection (LODs) and quantitation (LOQs) ranged from 0.03 to 3 ng/ml and 0.12 to 10 ng/ml respectively, values well below the residue limits set by the EU. Less than 2% of the samples were found positive containing amounts higher than the EU limits. The effect of fruit peeling and washing was also investigated.     

Use of dolomite phosphate rock (DPR) fertilizers to reduce phosphorus leaching from sandy soil

There is increasing concern over P leaching from sandy soils applied with water-soluble P fertilizers. Laboratory column leaching experiments were conducted to evaluate P leaching from a typical acidic sandy soil in Florida amended with DPR fertilizers developed from dolomite phosphate rock (DPR) and N-Viro soil. Ten leaching events were carried out at an interval of 7 days, with a total leaching volume of 1,183 mm equivalent to the mean annual rainfall of this region during the period of 2001-2003. Leachates were collected and analyzed for total P and inorganic P. Phosphorus in the leachate was dominantly reactive, accounting for 67.7-99.9% of total P leached. Phosphorus leaching loss mainly occurred in the first three leaching events, accounting for 62.0-98.8% of the total P leached over the whole period. The percentage of P leached (in the total P added) from the soil amended with water-soluble P fertilizer was higher than those receiving the DPR fertilizers. The former was up to 96.6%, whereas the latter ranged from 0.3% to 3.8%. These results indicate that the use of N-Viro-based DPR fertilizers can reduce P leaching from sandy soils.     

Lead and zinc accumulation and tolerance in populations of six wetland plants

Wetland plants such as Typha latifolia and Phragmites australis have been indicated to show a lack of evolution of metal tolerance in metal-contaminated populations. The aim of the present study is to verify whether other common wetland plants such as Alternanthera philoxeroides and Beckmannia syzigachne, also possess the same characteristics. Lead and zinc tolerances in populations of six species collected from contaminated and clean sites were examined by hydroponics. In general, the contaminated populations did not show higher metal tolerance and accumulation than the controls. Similar growth responses and tolerance indices in the same metal treatment solution between contaminated and control populations suggest that metal tolerance in wetland plants are generally not further evolved by contaminated environment. The reasons may be related to the special root anatomy in wetland plants, the alleviated metal toxicity by the reduced rooting conditions and the relatively high innate metal tolerance in some species.     

Effects of sampling,preparation and defecation on metal concentrations in selected invertebrates at urban sites

In order to obtain basic information for designing standardized test preparation methods, the heavy metals Zn, Cu, Cd and Pb were measured in gastropods (Xerolenta obvia), oligochaetes (Lumbricus terrestris), isopods (Armadillidium vulgare, Trachelipus rathkei) and carabids (Harpalus rubripes, Calathus fuscipes) using different sampling methods and different modes of sample treatment. In some of the experiments, higher Zn, Cd and Pb, and lower Cu-contents were observed in isopods and carabids trapped with formalin-pitfalls compared to manually collected specimens (which were allowed to defecate). Defecation had marked effects on the levels of all four metals investigated in oligochaetes, and on Cd and Pb in gastropods and isopods. Cellulose was fed as an accelerator of gut passage and showed a significant effect on the Pb concentration in the soft body of gastropods. Deionate-washed isopods (A. vulgare) showed higher Cd concentrations than ultrasonic-cleaned individuals. No marked differences were observed between heat-dried and freeze-dried isopods. Carabids showed strong sex-specific differences in metal concentrations. Based on these and previous results, invertebrates should be: collected in vivo, allowed to defecate, be freeze-fixed and (at least in arthropods) ultrasonic-cleaned, determined to species level and in certain groups (carabids) also to sex, and then be sized or sorted by size (age) before further preparation and analysis. If any of these treatments is impractical, comparable sampling and preparation methods are recommended as a minimum requirement in order to avoid bias in the results and/or interpretation.     

Spatial distribution and vertical variation of arsenic in Guangdong soil profiles, China

Total of 260 soil profiles were reported to investigate the arsenic spatial distribution and vertical variation in Guangdong province. The arsenic concentration followed an approximately lognormal distribution. The arsenic geometric mean concentration of 10.4 mg/kg is higher than that of China. An upper baseline concentration of 23.4 mg/kg was estimated for surface soils. The influence of soil properties on arsenic concentration was not important. Arsenic spatial distributions presented similar patterns that high arsenic concentration mainly located in limestone, and sandshale areas, indicating that soil arsenic distribution was dependent on bedrock properties than anthropogenic inputs. Moreover, from A- to C-horizon arsenic geometric mean concentrations had an increasing tendency of 10.4, 10.7 to 11.3 mg/kg. This vertical variation may be related to the lower soil organic matter and soil degradation and erosion. Consequently, the soil arsenic export into surface and groundwaters would reach 1040 t year-1 in the study area.     

Fuzzy risk assessment of oil and gas offshore wells

Risk evaluation of offshore wells is a challenging task, given that much of the available data is highly uncertain and vague, and many of the mechanisms are complex and difficult to understand. Consequently, a systematic approach is required to handle both quantitative and qualitative data as well as means to update existing information when new knowledge and data become available. Each Basic Risk Item (BRI) in a hierarchical framework is expressed as a fuzzy number, which is a combination of the likelihood of a failure event and the associated failure consequence. Analytical Hierarchy Process (AHP) is used to estimate weights required for grouping non-commensurate risk sources. Evidential Reasoning (ER) is employed to incorporate new data for updating existing risk estimates. It is envisaged that the proposed approach could serve as a basis for benchmarking acceptable risks in offshore wells.     

Characterization of ambient volatile organic compounds at a landfill site in Guangzhou,South China

Ambient air monitoring was conducted at Datianshan landfill, Guangzhou, South China in 1998 to investigate the seasonal and horizontal variations of trace volatile organic compounds (VOCs). Twelve sampling points over the Datianshan landfill were selected and samples were collected simultaneously using Carbontrap(TM) adsorption tubes. Thirty eight VOCs were detected in the winter, whereas 60 were detected in the summer. The VOC levels measured in summer were alkanes, 0.5-6.5 microg/m(3); aromatics, 2.3-1667 microg/m(3); chlorinated species, 0.2-31 microg/m(3); terpines, 0.1-34 microg/m(3); carbonyl species, 0.3-5.6 microg/m(3) and naphthalene and its derivatives, 0.4-27 microg/m(3). Compared to the summer samples the VOC levels in winter were much lower (mostly 1-2 orders of magnitude lower). The aromatics are dominant VOCs in landfill air both in winter and summer. High levels of alkylbenzene and terpines such as methyl-isopropylbenzene (max 1667 microg/m(3)) and limonene (max 162 microg/m(3)) cause undesirable odor. The similar correlation coefficients of BTEX in summer and winter suggest VOCs emissions were from landfill site sources. The variation of BTEX ratio at landfill site is different from that in the urban area of Guangzhou. It shows that the ambient VOCs at landfill site were different from the urban areas.     

Effect of Hybrid Tackifiers on Adhesion Properties of Epoxidized Natural Rubber-Based Pressure-Sensitive Adhesives

Viscosity, peel and shear strength of epoxidized natural rubber (ENR)-based pressure-sensitive adhesive was studied by using hybrid tackifiers consisting of a mixture of coumarone-indene resin and petro resin. The coumarone-indene resin concentration was fixed at 40 parts per hundred parts of rubber (phr). The concentration of petro resin, however, was varied from 20 to 80 phr. Toluene and polyethylene terephthalate (PET) film were used as the solvent and coating substrate respectively throughout the experiment. Viscosity of adhesive was determined by a HAAKE Rotary Viscometer whereas peel and shear strength was measured by a Lloyd Adhesion Tester. Results show that viscosity and shear strength decreases with increasing petro resin concentration. However, peel strength exhibits a maximum value at 40 phr petro resin, an observation which is attributed to maximum wettability and compatibility of adhesive on the substrate. ENR 25-based adhesive exhibits higher viscosity and peel strength but lower shear strength compared to the ENR 50 adhesive system.     

Use of waste plastic in concrete mixture as aggregate replacement

Industrial activities in Iraq are associated with significant amounts of non-biodegradable solid waste, waste plastic being among the most prominent. This study involved 86 experiments and 254 tests to determine the efficiency of reusing waste plastic in the production of concrete. Thirty kilograms of waste plastic of fabriform shapes was used as a partial replacement for sand by 0%, 10%, 15%, and 20% with 800 kg of concrete mixtures. All of the concrete mixtures were tested at room temperature. These tests include performing slump, fresh density, dry density, compressive strength, flexural strength, and toughness indices. Seventy cubes were molded for compressive strength and dry density tests, and 54 prisms were cast for flexural strength and toughness indices tests. Curing ages of 3, 7, 14, and 28 days for the concrete mixtures were applied in this work. The results proved the arrest of the propagation of micro cracks by introducing waste plastic of fabriform shapes to concrete mixtures. This study insures that reusing waste plastic as a sand-substitution aggregate in concrete gives a good approach to reduce the cost of materials and solve some of the solid waste problems posed by plastics.