超高效液相色谱串联质谱检测猪粪中残留的四环素类抗生素

本研究建立了超高效液相色谱/四极杆-飞行时间串联质谱(UPLC/Q-ToF Ms/Ms)测定猪粪中残留土霉素、四环素和金霉素的方法.样品分别经Mc Ⅰ lvaine-Na2EDTA缓冲液和超声提取、SPE固相萃取后,采用超高效液相色谱分离,紫外检测外标法定量,四级杆-飞行时间串联质谱仪正离子模式定性.在0.5mg·kg-1DW-10 mg·kg-1Dw(dry weight)范围内,土霉素、四环素、金霉素的标准曲线R2均大于0.99,相对标准偏差小于3%,样品加标平均回收率在70.0%-113.0%之间;采用该方法,土霉素、四环素和金霉素的检测可在5min内完成,它们的检出限分别为0.1 mg·kg-1,0.1 mg·kg-1和0.2 mg·kg-1.北京地区万头养猪场猪粪样品的检测结果表明,这3种四环素均有不同程度的检出,其中土霉素浓度范围10.5mg·kg-1DW-513.4 mg·kg-1DW,四环素浓度范围12.53-77.10 mg·kg-1Dw,金霉素浓度范围0.0-19.22 mg·kg-1Dw.     

土壤钙的生物有效性及与其它元素的相互作用

根据国内有关土壤钙素的研究文献、总结了土壤钙的生物有效性.土壤钙与其它元素的相互作用,以及钙在土壤中的固定、移动的研究进展,提出了钙肥的施用原则.其施用原则应该是平衡且适量。     

TiO2@palygorskite composite for the efficient remediation of oil spills via a dispersion-photodegradation synergy

• A novel and multi-functional clay-based oil spill remediation system was constructed. • TiO₂@PAL functions as a particulate dispersant to break oil slick into tiny droplets. • Effective dispersion leads to the direct contact of TiO₂ with oil pollutes directly. • TiO₂ loaded on PAL exhibits efficient photodegradation for oil pollutants. • TiO₂@PAL shows a typical dispersion-photocatalysis synergistic remediation. Removing spilled oil from the water surface is critically important given that oil spill accidents are a common occurrence. In this study, TiO₂@Palygorskite composite prepared by a simple coprecipitation method was used for oil spill remediation via a dispersion-photodegradation synergy. Diesel could be efficiently dispersed into small oil droplets by TiO₂@Palygorskite. These dispersed droplets had an average diameter of 20–30 mm and exhibited good time stability. The tight adsorption of TiO₂@Palygorskite on the surface of the droplets was observed in fluorescence and SEM images. As a particulate dispersant, the direct contact of TiO₂@Palygorskite with oil pollutants effectively enhanced the photodegradation efficiency of TiO₂ for oil. During the photodegradation process, •O₂⁻and •OH were detected by ESR and radical trapping experiments. The photodegradation efficiency of diesel by TiO₂@Palygorskite was enhanced by about 5 times compared with pure TiO₂ under simulated sunlight irradiation. The establishment of this new dispersion-photodegradation synergistic remediation system provides a new direction for the development of marine oil spill remediation.     

Modeling porosity reductions caused by mineral fouling in continuous-wall permeable reactive barriers

A study was conducted to assess key factors to include when modeling porosity reductions caused by mineral fouling in permeable reactive barriers (PRBs) containing granular zero valent iron. The public domain codes MODFLOW and RT3D were used and a geochemical algorithm was developed for RT3D to simulate geochemical reactions occurring in PRBs. Results of simulations conducted with the model show that the largest porosity reductions occur between the entrance and mid-plane of the PRB as a result of precipitation of carbonate minerals and that smaller porosity reductions occur between the mid-plane and exit face due to precipitation of ferrous hydroxide. These findings are consistent with field and laboratory observations, as well as modeling predictions made by others. Parametric studies were conducted to identify the most important variables to include in a model evaluating porosity reduction. These studies showed that three minerals (CaCO3, FeCO3, and Fe(OH)2 (am)) account for more than 99% of the porosity reductions that were predicted. The porosity reduction is sensitive to influent concentrations of HCO3-, Ca2+, CO3(2-), and dissolved oxygen, the anaerobic iron corrosion rate, and the rates of CaCO3 and FeCO3 formation. The predictions also show that porosity reductions in PRBs can be spatially variable and mineral forming ions penetrate deeper into the PRB as a result of flow heterogeneities, which reflects the balance between the rate of mass transport and geochemical reaction rates. Level of aquifer heterogeneity and the contrast in hydraulic conductivity between the aquifer and PRB are the most important hydraulic variables affecting porosity reduction. Spatial continuity of aquifer hydraulic conductivity is less significant.     

3株反硝化聚磷菌的分离与鉴定

通过烛缸法培养富集、分离,结合除磷试验、硝酸盐还原产气试验及异染颗粒和PHB颗粒染色辅助检验相结合的方法筛选,得到3株具有较高脱氮除磷效率的反硝化聚磷菌DNPA8, DNPA9和DNPA10。在富氮富磷培养基中培养48 h,各菌株的脱氮率均大于75%,除磷率均大于78%。采用多相分类的方法确定了3株反硝化聚磷菌的分类地位,DNPA8为嗜麦芽寡养单胞菌,DNPA9为水生丛毛单胞菌属首次发现的反硝化聚磷菌;DNPA10为约翰逊氏不动杆菌。该研究结果为富营养化水体的治理提供了有效的菌种资源。     

短程硝化—厌氧氨氧化组合工艺在脱氮领域的研究进展

基于全程硝化反硝化的传统生物脱氮工艺在硝化过程中需要大量氧气供应,反硝化过程需要有机物作为碳源,存在能耗与药耗过大的问题.为了降低废水脱氮的成本,短程硝化(PN)—厌氧氨氧化(ANAMMOX)组合工艺(PNA工艺)得到了高速发展.综述了PNA工艺的影响因素,重点介绍了4种基于PN与ANAMMOX原理开发的衍生PNA工艺...     

化学溶胀法分离废弃线路板中金属与基板

废弃线路板的粉碎和所含金属组分的高效解离是后续分选回收的前提条件。本研究分别使用乙二胺等10种溶剂浸泡废弃线路板,比较对线路板中铜箔与基板间剥离强度的影响,从而筛选出4种有代表性的溶剂,即溶剂D、溶剂F、丙酮和水, 比较废弃线路板经化学溶胀后的单体解离度和获得一定粒径分布的颗粒所需的破碎时间。研究结果表明,化学溶胀后破碎能大幅提高金属的单体解离度,浸泡效果的优良排序为：溶剂D>溶剂F>丙酮>水;浸泡时间越长,浸泡温度越高,对剥离强度的降低越有利;使用溶剂D在150℃、3 h或140℃、5 h的工艺下浸泡废弃线路板,可以使铜箔与基板自动脱落。研究结果为后续的分选提供了便利的条件。     

加油站地下储油罐压力管理系统的相关研究

在当前普遍采用的加油站真空辅助式第二阶段油气回收系统中,为了避免回收到地下储油罐中的油气再次通过P/V阀排空,必须对其中气相空间的压力实施有效控制。从国外的发展情况来看,地下储油罐的压力管理系统主要分为基于膜分离技术、基于弹性气囊和基于活性炭吸附三大类,其中膜法油气回收装置在国内已经得到了较多关注。首次系统介绍了气囊式压力管理系统的工作原理及其主要结构设计,具体包括管线布局、钢制压力容器壳体、位于容器顶部封头上的接口组件和全部位于容器内的气囊等;同时对另外一种可行方案进行了分析。     

C/N比和曝气量影响MBR同步硝化反硝化的研究

通过连续运行MBR研究了C/N比和曝气量对同步硝化反硝化的影响,结果表明,在环境温度13～23℃,MLSS为6.0～6.8 g/L,进水NH⁺₄-N浓度50 mg/L,曝气量0.5 m³/h,HRT为6 h实验条件下,总氮去除率随着进水C/N比的增加而增加,在C/N比为6∶1～8∶1时,TN去除率达到79%～89%,低的C/N比抑制反硝化,过高的C/N比增加了碳源补加的成本。改变反应曝气量,当C/N比为6∶1,曝气量为0.4 m³/h时,TN的去除率达到了最大值85%。曝气量过高或过低,TN去除率均下降。并对在不同曝气量下MBR 内的DO 值分布进行了初步研究。     

膜生物反应器处理微污染水源水的研究与应用现状

膜生物反应器及其组合工艺能实现水源水中微污染物的有效去除,是一种新型高效水处理工艺.总结了膜生物反应器处理微污染水源水的研究与应用现状、污染物去除效果和机制;在分析膜污染机制基础上归纳了膜污染控制和污染膜清洗方式,展望了膜生物反应器在给水领域应用需克服解决的技术难点.