Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]     

Toxic effects of wastewater from various phases of monosodium glutamate production on seed germination and root elongation of crops

To make a comprehensive assessment on monosodium glutamate (MSG) wastewater pollution, a pollution exposure experiment was carried out on the seed germination and root elongation of wheat, Chinese cabbage and tomato by using the wastewater discharged from different processing phases of MSG production. The results showed that there were significantly positive linear relationships between the inhibitory rates of wheat seed germination and root elongation and the COD_cr of the mother liquor scraps. The toxicity of MSG wastewater to the test crops was in the order of tomato > Chinese cabbage > wheat, indicating that tomato was the most sensitive to the wastewater, and could be considered as an ideal toxic bioindicator. The half-effect concentrations (IC₅₀) based on the seed germination and root elongation of the test crops exposed to the wastewater discharged from various processing phases of MSG production was 22.0–32 432 and 17.3–3320 mg/L, respectively. Translated from Chinese Journal of Applied Ecology, 2006, 17(7): 1286–1290 [译自: 应用生态学报]     

一种超声速气体冲击射流噪声的屏蔽抑制方法

根据对冲击射流离散频率噪声产生的反馈机理的认识，提出了一种能够有效地破坏反馈环的形成，从而抑制冲击射流离散频率噪声的喷嘴屏蔽方法。这种方法是通过阻隔反馈声波使其不能到达喷嘴唇口、同时屏蔽物不与射流接触来实现降噪的目的，实验结果表明，对于合适的屏蔽罩参数，正常降噪效果达5dB以上。分析表明这种降噪方法对射流冲击平板的推力和除尘除水效率的提高有帮助。     

生物硝化池污水中硝化细菌的快速定量研究

实验采用聚合酶链式反应（PCR）技术与最大几率数法（MPN）相结合的MPN－PCR法对生物硝化池污水中的硝化细菌进行快速定量。所用的一对PCR引物是在对硝化细菌的16SrRNA基因进行系统比较的基础上设计合成的，可以扩增出大小为388bp的DNA片段。以从生物硝化池污水中抽提的含硝化细菌DNA的混合DNA为模板，进行PCR扩增并确定合适的扩增条件。运用MPN－PCR法进行定量检测的整个过程可在几小时之内完成。     

冷拉螺旋叶片展开的精确算法

提出了一种新的、更趋精确合理的关于冷拉螺旋叶片坯料的展开与放样计算方法 ,并从实践中探索出叶片在展开与放样时其内径的精确修正系数k之值。     

中国产品生命周期影响评价方法研究

讨论了确定中国产品生命周期影响评价所需的标准化基准和权重的确定方法和程序，包括产品系统环境影响潜值计算，数据标准化，加权评估 以及计算环境影响负荷和资源耗竭系数4个步骤。标准化基准采用1990年中国人均环境影响总潜值来表达，而权重采用1990年的基准与2000年中国政府的削减目标所估算的基准之间的比值计算。     

电解制备聚合铝过程中Alb形态生成条件研究

考察了电解法制备聚合铝过程中AIb的最佳形成条件。AIb的形成与电流密度、极板间距、电解液的温度、铝的浓度以及电解时间等因素有关。在制备AI浓度为2．0mol/L的聚合氯化铝时，最佳的电流密度和极板间距分别为1．1A／dm^2和10mm。由于电化学过程中产生的不均匀的界面pH差值较大而生成较多的AI（OH）4^-作为AIb结构的结晶核心，因此能形成更多的AIb聚合形态。     

耐热粉末铝合金筒体热旋成形试验

介绍了喷射沉积耐热铝合金管坯经挤压变形 ,变薄旋压筒体的研制过程 ;重点论述了热旋成形筒体的工艺路线。试验探讨了耐热铝合金的旋压温度为 35 0～ 45 0℃ ,道次变薄率约为2 0 % ,累计变薄率约 5 0 % ,需中间退火 ,退火温度宜取 35 0℃。热旋结果认为 ,喷射沉积耐热粉末铝合金铸坯直接热旋成形困难 ,需经挤压比大于 4的变形致密 ,有助于热旋成形。耐热粉末铝合金挤压坯加热变薄旋压 ,应采用小压下量多道次的变形过程 ,逐渐细化晶粒组织 ,才能旋出综合性能良好的筒形件。     

矿区复合生态系统中土壤演替和植被演替的相互影响

在讨论矿区复合生态系统涵义的基础上，以平朔安太堡露天煤矿为例，探讨了大型露天矿区复合生态系统演替与原生态系统演替的不同，即露天矿区复合生态系统演替极大地受着社会--经济--自然三方面的控制，在演替过程中土壤演替与植被演替相互影响、相互协调，共同作用了矿区复合生态系统。同时，还阐述了进行矿区生态重建的两大关键措施：生态环境建设和群落建设。     

Decolorization of Direct Black 22 by Aspergillus ficuum

ＩｎｔｒｏｄｕｃｔｉｏｎＳｙｎｔｈｅｔｉｃｄｙｅｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅｆｉｅｌｄｏｆｐｒｉｎｔｉｎｇａｎｄｄｙｅｉｎｇｏｆｔｅｘｔｉｌｅｓ,ｐａｐｅｒｐｒｉｎｔｉｎｇ,ｌｅａｔｈｅｒａｎｄａｓａｄｄｉｔｉｖｅｓｉｎｐｅｔｒｏｌｅｕｍｐｒｏｄｕｃｔｓ.Ｗｉｔｈｔｈｅｌａｒｇｅｏｕｔｐｕｔｏｆｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒ,ｔｈａｔｄｙｅｓａｒｅａｃｃｕｍｕｌａｔｅｄｉｎｔｈｅｅｎｖｉｒｏｎｍｅｎｔｌｅａｄｔｏｓｅｒｉｏｕｓｅｎｖｉｒｏｎｍｅｎｔｐｏｌｌｕｔｉｏｎ .Ｂｅｃａｕｓｅｏｆｔ…