Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

小分子有机酸对紫色土及其溶液中Pb的赋存影响

以紫色土中铅(Pb)为研究对象,采用以0.01 mol·L~(-1)硝酸钠(NaNO_3)为背景电解质的一步提取法,研究了不同浓度下乙酸,酒石酸和柠檬酸对土壤中Pb的释放作用,并通过土壤重金属形态的分步提取法和地球化学平衡软件Visual MINTEQ v3.0,进一步分析和预测了小分子有机酸作用下土壤中Pb以及土壤溶液中Pb的形态变化.在此基础上,分析了小分子有机酸对Pb作用的环境意义与环境风险.结果表明,3种小分子有机酸均显著增加了紫色土中Pb的释放量,活化效果表现为柠檬酸酒石酸乙酸.在有机酸作用下,土壤中交换态Pb总量增加,碳酸盐结合态Pb和铁锰氧化物结合态Pb总量降低;土壤溶液中Pb以有机结合态为主,占总Pb质量的45.16%~75.05%,游离态次之,占22.71%~50.25%,且随着浓度增加,柠檬酸和酒石酸作用下的土壤溶液中的游离态Pb和无机结合态Pb增加,而有机结合态Pb减少,乙酸则呈相反趋势.总体上看,小分子有机酸提高了紫色土中Pb的生物有效性,且存在地下水的淋溶风险,其中柠檬酸的淋溶风险远大于酒石酸和乙酸.     

我国不同区域玉米施肥的生命周期评价

以吉林、陕西、河南、湖南、广西等玉米主产省份为例,以生产1t玉米为评价的功能单元,应用生命周期评价(LCA)方法,比较了不同生态区玉米生产过程中施肥的资源环境影响潜力.结果表明,五省环境影响综合指数大小依次为广西0.315、湖南0.309、河南0.273、陕西0.238、吉林0.183.几种资源环境影响中,潜力大小依次是富营养化、环境酸化、温室效应、土地利用和能源消耗,其中,施用氮肥引起的氨挥发是导致富营养化和酸化的主要原因.农户间玉米施肥的资源环境影响潜力差异很大,环境影响综合指数变异范围在41.2%～81.6%之间,且以湖南省最高,吉林省最低.如果将玉米追肥由撒施都改为穴施,五省的环境影响综合指数将降低8.5%～34.1%.总体而言,在目前生产条件下,吉林省具有资源环境影响较低的优势;富营养化是最主要的环境影响类型,而改进施肥方式、减少氨挥发是降低玉米施肥资源环境影响的关键技术途径.     

Differences in rheological and fractal properties of conditioned and raw sewage sludge

Rheological tests for raw and conditioned activated sludge(AS) or anaerobic digested sludge(ADS) show that power-law relationships can be used to describe the evolution of several rheological parameters,i.e.,limiting viscosity(η∞),yield stress(τy),cohesion energy of the sludge network(Ec),and storage modulus(G’),with total suspended solid(TSS) content in raw and conditioned sludge.A gel-like structure that behaves similar to weak-link flocs/aggregates was observed in AS and ADS.As derived from the double-logarithmic plots of G’-TSS content,the mass fractal dimensions of the raw and conditioned AS or ADS flocs/aggregates were 2.70 and 2.53 or 2.85 and 2.79,respectively.The rheological tests also indicate that both polymer conditioning and increased TSS content led to improved elastic behavior,cohesion energy,and yield stress of the sludge network,as well as expanded the corresponding linear viscoelastic range.The porosity of AS or ADS flocs/aggregates will be improved by polymer conditioning.     

长三角典型村域次降雨条件下氮素非点源输出特征

研究长三角典型都市农业村镇不同土地利用下的氮素非点源输出特征,以期为治理该区域的面源污染提供科学依据.通过典型次降雨径流事件中氮形态和输出负荷变化的研究发现:监测点总氮(TN)的事件平均浓度(EMC)为20.01～22.83mg/L,其中溶解态氮(DN)占TN的比例最大;研究区非点源氮流失以溶解态为主,DN又以溶解态有机氮(DON)为主.耦合各形态氮浓度与径流量特征,发现非点源氮素输出呈现2个峰值,且出现在径流峰值之前4～55min;TN、DN和硝态氮(NO3--N)浓度随降雨时间增加呈现减少趋势;氮素负荷受其浓度和径流量的共同作用,基本上呈现与氮素浓度相同的变化特征,但起伏变化较为平缓.氮素污染负荷积累曲线分析表明,村域地表径流各形态氮素均存在初期冲刷效应.     

Persistent organochlorine residues in sediments of the Haihe River and Dagu Drainage River in Tianjin, China

Persistent organochlorine compounds were analyzed by means of GC-ECD in surface sediment samples from two selected rivers in Tianjin, Haihe River and Dagu Drainage River. A total of 16 surface sediment sites were selected along the both rivers. The frequency of detection of T-HCH and T-DDT in sediment samples both was up to 100%, which illustrated that the contamination of HCH and DDT was widespread in Haihe and Dagu Drainage Rivers. Results indicated that the concentrations of various pesticides in sediments from Haihe River were in the range of 3.30-75.96 ng/g dw for T-HCH and 1.57-211.57 ng/g dw for T-DDT. Compared with Haihe River, Dagu Drainage River was contaminated by HCHs and DDTs along the all locations and the values of T-HCH and T-DDT residues in sediments ranged from 2.30 to 124.61 ng/g dw and from 11.28 to 237.30 ng/g dw, respectively, The possible pollution sources were analyzed through monitoring results of organochlorine pesticides（OCPs） residues in sediments from the two rivers. The investigation also indicated that HCH was still used as pesticide in Tianjin partial area.     

纳米零价铁的制备及其去除水中对氯硝基苯的研究

通过FeSO4与KBH4反应,利用液相还原法制备纳米零价铁颗粒(NZVI),用XRD、SEM和BET对其性能进行表征。在常温常压下利用纳米铁还原废水中的对氯硝基苯(p-CNB),探讨了反应条件对还原率的影响。结果表明,制备过程中碱性物质(NaOH)的添加可以明显减小颗粒粒径,增大比表面积,提高纳米铁还原反应的效率。NZVI对于对氯硝基苯有很好的去除效果,NZVI用量、p-CNB初始浓度和pH值均对其去除效率产生影响。在纳米铁投加量为1 g/L,pH=2的条件下,添加NaOH的纳米铁能在120 min内将质量浓度为50 mg/L的对氯硝基苯基本完全降解,降解率为98.8%。此外,还对NZVI还原对氯硝基苯的机理进行了初步探讨。     

深圳大气PM2.5中水溶性有机物的来源特征

对2017年9月～2018年8月深圳市北部大气PM_2.5中水溶性有机物(WSOM)的质量浓度、质谱及来源结构进行测量和分析.结果表明:PM_2.5的质量浓度为(32.3±18.4)μg/m³,WSOM的质量浓度为(9.4±5.7)μg/m³,占颗粒物总有机物的(77.6%±14.0%).质谱分析显示,WSOM的氧碳比(O/C)平均值达到(0.57±0.09),属于二次有机物的O/C值范围,且生物质燃烧排放的离子碎片C₂H₄O₂⁺的丰度显著,说明WSOM的来源中有显著的生物质燃烧排放的有机气溶胶.为了明确WSOM的来源结构,利用正矩阵因子分解法(PMF)模型进行来源解析,发现3个合理因子:高氧化态有机气溶胶(MO-OOA),低氧化态有机气溶胶(LO-OOA)和生物质燃烧(BBOA),贡献比例分别为51.7%,31.8%和16.5%.MO-OOA和BBOA贡献浓度均呈现秋冬高、春夏低的季节变化特征,反向轨迹分析显示其与...     

中国危险废物和医疗废物焚烧处置行业二（口恶）排放水平研究

通过调研全国危险废物和医疗废物焚烧处置设施,对包含二噁英排放水平的设施按处置对象、炉型和处理量分类,并作系统分析和研究.结果表明现有危险废物焚烧设施烟气中二噁英的浓度比医疗废物低,达标率为74.19%;危险废物选用回转窑处置效果较好,达标率为66.67%;而医疗废物选用回转窑或热解炉,要综合考虑处置规模、生产成本和二英排放总量等因素;危险废物介于10~30 t·d-1和医疗废物介于10~20 t·d-1的处置设施要尤其注意二噁英的排放问题;医疗废物焚烧飞灰中二噁英的均值浓度为危险废物6倍以上,仅有16.67%满足填埋要求.二者烟气中二英的浓度分布以1,2,3,4,6,7,8-HpCDF、2,3,7,8-TCDF和OCDD为主.     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.