贸易、外商直接投资、经济增长与环境污染

选取1990—2002年中国30个省市贸易、外商直接投资(FDI)、经济和环境相关数据，从定性和定量描述的角度探讨贸易、FDI对我国环境库兹涅茨曲线(ECK)的影响。研究表明：贸易对中国的ECK没有直接影响。但考虑到贸易对经济增长的贡献，以及它在引进先进污染防治技术和环境管理思想方法方面的积极作用，积极发展对外贸易将有助于改善我国经济增长带来的环境污染问题。另一方面。FDI与污染物排放之间呈现出显著的正相关关系。在中国接受经济全球化影响的过程中，由于部分地区急于吸引外资，加之环境管理体系的不完善，外商直接投资在某些方面对我国环境造成了一定的负面影响。     

我国居室内空气中甲醛污染现状分析及对策研究

介绍了我国目前居室空气中甲醛污染现状,分析了居室空气中甲醛的来源及污染的成因。在实际工作中,摸索、总结了一套以在房间布局中设立衣帽间为核心的、防止因装修引起的居室空气中甲醛污染的具体办法。该办法简单、经济、适用面广,效果明显, 值得提倡和普及。     

基于线切割 3B编程CAI软件的探讨

利用VB语言作为编程工具,探讨了开发线切割3B格式自动编程软件的过程.通过该软件,可以直观显示线切割加工的轨迹图及其3B程序.     

基于生态安全的快速城市化地区空间冲突测度 ——以长株潭城市群为例

空间冲突是城市化过程中各种矛盾形成与激化的直接原因,是影响区域可持续发展的关键因素,合理测度快速城市化地区的空间冲突水平,对于优化区域发展模式、 避免区域生态风险具有重要意义。在利用遥感与GIS技术分析长株潭近年来空间格局变化的基础上,量化影响区域生态安全的空间外部压力值、 生态风险暴露值、 生态风险效应值3个因子,构建基于生态安全的空间冲突测度模型,对长株潭地区的空间冲突水平进行评估。研究表明:近年来长株潭地区的空间冲突作用强度总体呈现上升趋势,1993—2008年其冲突指数均值由0.264增长到0.323,且严重失控级别空间冲突的区域面积比例增幅最大,达1.07倍;不同空间类型的空间冲突强度不同,林地、 耕地的空间冲突水平相对较低,建设用地的空间冲突水平较高;城乡过渡地带是空间格局变化最为频繁、 空间冲突最为激烈的区域,其次是城市内部,农村地区的空间冲突强度远远低于城市。     

Novel Co-Mg-Al-Ti-O catalyst derived from hydrotalcite-like compound for NO storage/decomposition

Catalysts of Co_1.5Mg_1.5/Al_0.9Ti_0.1O and Co_1.5Mg_1.5/AlO were successfully prepared by calcinations of corresponding hydrotalcite-like compounds at 800℃ for 4 hr. The derived oxides were of spinel phase and a small quantity of Ti substitution did not change the crystal purity. Their catalytic performance for the NO storage/decomposition was investigated. Ti incorporation enhanced the NO decomposition activity while has an opposite effect on the storage capacity of catalyst. In situ FT-IR spectra of the catalysts showed that the final adsorption species on the catalysts was coordinated nitrates/nitrites. In addition, NO storage/decomposition mechanism has been discussed on the basis of these observations.     

Size distributions and sources of elements in particulate matter at curbside, urban and rural sites in Beijing

Size distributions of 29 elements in aerosols collected at urban, rural and curbside sites in Beijing were studied. High levels of Mn, Ni, As, Cd and Pb indicate the pollution of toxic heavy metals cannot be neglected in Beijing. Principal component analysis (PCA) indicates 4 sources of combustion emission, crust related sources, traffic related sources and volatile species from coal combustion. The elements can be roughly divided into 3 groups by size distribution and enrichment factors method (EFs). Group 1 elements are crust related and mainly found within coarse mode including Al, Mg, Ca, Sc, Ti, Fe, Sr, Zr and Ba; Group 2 elements are fossil fuel related and mostly concentrated in accumulation mode including S, As, Se, Ag, Cd, Tl and Pb; Group 3 elements are multi-source related and show multi-mode distribution including Be, Na, K, Cr, Mn, Co, Ni, Cu, Zn, Ga, Mo, Sn and Sb. The EFs of Be, S, Cr, Co, Ni, Cu, Ga, Se, Mo, Ag, Cd, Sb, Tl and Pb show higher values in winter than in summer indicating sources of coal combustion for heating in winter. The abundance of Cu and Sb in coarse mode is about 2-6 times higher at curbside site than at urban site indicating their traffic sources. Coal burning may be the major source of Pb in Beijing since the phase out of leaded gasoline, as the EFs of Pb are comparable at both urban and curbside sites, and about two times higher in winter than that in summer.     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.     

不同曝气强度下SBMBBR和SBR脱氮除磷性能对比研究

对比考察了不同曝气强度下序批式活性污泥反应器(SBR)和序批式移动床生物膜反应器(SBMBBR)的脱氮除磷效果,并分析了反应器单个周期内有机物、氮和磷的转化过程.实验结果表明,SBMBBR和SBR脱氮主要是基于好氧段发生的同步硝化反硝化(SND)及进水、搅拌阶段发生的缺氧反硝化途径实现的,而除磷是基于常规生物除磷和反硝化除磷过程而完成.曝气强度会影响SBR和SBMBBR好氧阶段SND发生的程度,最佳曝气强度下两者通过SND作用去除的TN量分别达到去除总量的47.7%和79.0%.在采用先行厌氧的运行方式,保持系统内高浓度微生物,使反应器在进水C/N比只有2.2～3.5的条件下均取得了良好的脱氮除磷效果.两者相比,SBMBBR和SBR在COD和NH4-N去+除方面没有差异,而SBMBBR的反硝化、除磷效果更优,TN、TP去除率分别达到95.4%和93.5%,较SBR分别高出10.9%和4.1%.     

萘降解菌MQ合成靛蓝的研究

利用萘降解菌(丛毛单胞菌)MQ完整细胞对吲哚进行转化合成靛蓝,结果表明菌株MQ具有较好的靛蓝合成能力,靛蓝产量在4h左右即达到稳定.薄层色谱和高效液相色谱分析结果表明,合成的蓝色产物为靛蓝.考察了反应温度及摇床转速对靛蓝合成的影响,结果表明最适温度和转速分别为25℃和150r·min-1.随后,采用表面响应法确定了菌株MQ合成靛蓝的最优条件:菌株接种量OD6602.16,吲哚浓度200.55mg·L-1,pH=6.91.在最优条件下,菌株MQ合成靛蓝的产量为53.05mg·L-1,比初始条件下的产量提高了179%.     

MBR活性污泥培养驯化过程中生物多样性研究

以MBR反应器启动调试阶段的活性污泥为主要研究对象,系统考察了传统活性污泥法(Conventional activated sludge,CAS)污泥接种至MBR反应器内污泥培养驯化过程中生物多样性情况及微生物群落结构的演变规律.同时,在传统污水污泥检测指标的基础上,对各阶段污泥中总细菌基因组DNA进行提取,应用PCR-DGGE分子生物学技术获得了相应的凝胶电泳图谱并进一步分析了菌群间的相似性.结果表明,以CAS污泥为接种污泥在MBR反应器内培养驯化过程中微生物的多样性变化突出,细菌群落结构演替明显,不同阶段菌群间的相似性说明了各阶段菌群的演变关系:污泥培养驯化是一个逐步有序的过程,微生物随反应器内不同时期及环境的变化而调整,逐渐演变成适应MBR工艺的群落结构.