Mesoporous carbon adsorbents from melamine-formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), elemental(CHN) analysis, Fourier transform infrared(FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO_2 capture.The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO_2 adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO_2 adsorption capacity among the synthesized adsorbents. Breakthrough time and CO_2 equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO_2 system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

金属铜原子氧效应研究

目的获取金属铜空间原子氧环境适应性数据,提升材料空间环境适应性设计水平。方法将金属铜样品置于射频源原子氧辐照面积内开展原子氧辐照试验,束流密度为2.5×1016/(cm2·s),最长辐照时间为300 min。研究随辐照时间增加样品表面成分、形貌以及性能的变化。结果原子氧辐照后,金属铜表面变得粗糙,300 min辐照样品出现了氧化层脱落现象;随辐照时间增加,样品质量呈增加趋势,300 min辐照样品质量增加0.035 mg;试验后样品太阳吸收比升高最大值达0.07,光谱反射系数下降;原子氧作用导致金属铜表面疏水性能提高,摩擦磨损性能下降。结论得到了金属铜原子氧环境效应数据,可为航天器空间环境效应防护设计提供技术支撑。     

Diurnal and spatial variations of soil NOx fluxes in the northern steppe of China

NO_x emissions from biogenic sources in soils play a significant role in the gaseous loss of soil nitrogen and consequent changes in tropospheric chemistry. In order to investigate the characteristics of NO_x fluxes and factors influencing these fluxes in degraded sandy grasslands in northern China, diurnal and spatial variations of NO_x fluxes were measured in situ. A dynamic flux chamber method was used at eight sites with various vegetation coverages and soil types in the northern steppe of China in the summer season of 2010. Fluxes of NO_x from soils with plant covers were generally higher than those in the corresponding bare vegetation-free soils, indicating that the canopy plays an important role in the exchange of NO_x between soil and air. The fluxes of NO_x increased in the daytime, and decreased during the nighttime, with peak emissions occurring between 12:00 and 14:00. The results of multiple linear regression analysis indicated that the diurnal variation of NO_x fluxes was positively correlated with soil temperature (P < 0.05) and negatively with soil moisture content (P < 0.05). Based on measurement over a season, the overall variation in NO_x flux was lower than that of soil nitrogen contents, suggesting that the gaseous loss of N fromthe grasslands of northern China was not a significant contributor to the high C/N in the northern steppe of China. The concentration of NO_x emitted from soils in the region did not exceed the 1-hr National Ambient Air Quality Standard (0.25 mg/m³).     

锌在模拟工业大气环境下的腐蚀行为研究

目的研究不同时间下锌在SO2环境中的腐蚀特性。方法采用室内加速试验法,向大气加速腐蚀箱中通入25 mg/L SO2气体,进行模拟工业大气环境下的加速腐蚀试验。对腐蚀后金属材料进行质量增量测量和电化学测试,通过XRD,SEM等表征锌腐蚀产物及腐蚀形貌,研究腐蚀特性。结果初期阶段锌在SO2环境中的腐蚀速率逐渐增加,到腐蚀后期逐渐降低,1/Rct值先增大后减小,锌的腐蚀产物中的元素包括Zn,O和少量的S,主要产物为Zn4SO4(OH)6。结论初期在锌表面生成的腐蚀产物疏松,SO2能够通过产物层到达基体,促进腐蚀,不具有保护性。到后期,产物增多并且致密使SO2与基体接触的概率降低,从而使腐蚀速率减缓。     

基于可靠性分配的整机加速因子计算方法研究

目的验证长寿命高可靠整机产品的可靠性。方法基于RPN数据的可靠性分配方法,得到子系统在各故障模式下的失效率,接着针对导致各故障模式发生的多种应力,研究温度循环、温度驻留、湿度、振动应力下的加速因子,推导出整机加速因子计算公式,并以某典型电子产品加速试验为例,验证该方法的有效性。结果整机加速因子为322.5,比传统方法计算得到的4.78×105更符合实际情况。结论基于可靠性分配的整机加速因子计算方法为整机可靠性验证提供了合理的理论依据。     

Mobility of toxic metals in sediments: Assessing methods and controlling factors

<正>Metals and metalloids(termed as metals in this article)are important constituent elements of the earth's crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined as toxic metals.Toxic metals in the environment can be divided into two groups:those that     

400g-t复合环境试验离心机研制

目的研制一种容量达到400g-t的复合环境试验模拟离心机,能够实现离心-振动、离心-温度等复合环境模拟试验的开展。方法分解离心机的技术指标,进行总体部件设计、主驱动控制设计以及关键部件设计。系统配置静、动平衡检测装置,同时设计静态平衡调节装置。结果设计的静态平衡调节装置最大能调节6 t负载。系统预留多种复合模拟试验接口,可以实现离心-振动、离心-温度等复合环境模拟试验的开展。结论设计的400g-t综合环境试验离心机达到设计指标,满足工程应用与科学研究需求。     

动态飞行模拟器运动控制系统软件设计

目的研究动态飞行模拟器(DFS)运动控制系统软件功能、架构、模块、接口设计以及软件具体实现方法。方法在DFS工程控制系统功能及软件设计基础上,对运动控制系统功能及其与工程控制系统关系进行分析,结合现有软件设计方法及数据通讯方式,对软件进行架构设计、接口设计、模块设计,并结合软件运行环境对系统上位机软件进行设计。结果采用合适的编程语言实现了运动控制系统软件及其上位机软件的设计,并通过了工程实践对软件设计方法有效性的验证。结论工程实践表明文中所述DFS运动控制系统软件设计方法切实可行,能够满足工程应用要求。     

气相防锈技术在电器设备防腐中的应用

目的研究新型气相防锈剂对电器设备的防护效果及电性能的影响,解决电器设备服役过程中的腐蚀防护问题。方法采用中性盐雾试验对新型气相防锈剂对电器设备的防护效果进行测试,并通过绝缘电阻、介电常数、电容、表面电阻、体积电阻、电阻、耐击穿电压等测试了新型气相防锈剂对电器元件、电器设备电性能的影响。结果中性盐雾试验240 h后,无新型气相防锈剂保护的电器设备锈蚀严重,有新型气相防锈剂保护的电器设备锈蚀相对微弱;电路板原材料环氧树脂板、安规电器元件、电器设备与气防锈发散体直接接触720 h后,各自的电性能基本上没有变化,同时电器设备的正常功能也不受影响。结论新型气相防锈剂对电器设备有较好的防护效果,且不影响其电性能,可将其应用到电器设备实际运行过程中,解决电器设备服役过程中的腐蚀防护问题。     

Al-Cu-Mg系铝合金耐环境腐蚀性能研究

目的研究2D12铝合金耐环境腐蚀性能。方法对不同规格的Al-Cu-Mg系2D12铝合金的耐环境腐蚀性能包括晶间腐蚀、剥蚀性能以及抗应力腐蚀性能,按照标准试验方法进行测试、分析、评定试验数据。结果得到了不同规格2D12铝合金晶间腐蚀深度、剥蚀等级、应力腐蚀断裂时间及KISCC等。自然时效状态2D12铝合金具有晶间腐蚀倾向,最大晶间腐蚀深度为0.18 mm。不同规格2D12铝合金抗剥落腐蚀性倾向不同,从P级到EC级。2D12铝合金材料的拉伸应力腐蚀断裂寿命随试验应力的增加而降低,两种薄板(δ=1.5 mm和δ=2.0 mm)和型材(EL2805)临界应力腐蚀门槛值分别为160,140,230 MPa。2D12铝合金在S-L和S-T方向的应力腐蚀开裂门槛应力强度因子分别为22.6 MPa·m1/2和27.1 MPa·m1/2。结论 2D12铝合金抗应力腐蚀测试结果表明,S-L方向比S-T方向的抗应力腐蚀的性能低,其应力腐蚀开裂门槛应力强度因子与C环应力腐蚀结果一致,断口呈现典型的沿晶断裂应力腐蚀脆性断裂特征。