餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.     

Distribution and ecological risk assessment of organochlorine pesticides in surface sediments from the East Lake,China

Organochlorine pesticides (OCPs) are ubiquitous pollutants, and their presence in urban lakes is a concern for human and ecological health. Surface sediments in the East Lake, China, were collected in winter 2012 and summer 2013 to investigate concentrations, distribution patterns, possible sources, and potential ecological risks of OCPs in this area. The total concentrations of 14 OCPs ranged from 6.3 to 400 ng g^?1 dry weight (dw) with an average concentration of 79 ng g^?1 dw. The mean values of hexachlorocyclohexanes (HCHs) (α-, β-, γ-, and δ-HCH) and dichlorodiphenyltrichloroethanes (DDTs) (p,p’-DDE, p,p’-DDD, and p,p’-DDT) were 36 and 7.6 ng g^?1 dw, accounting for 45 and 10 % of the total OCPs, respectively. The concentrations of OCPs in sediment samples collected in winter were significantly higher than those in summer, especially the HCHs, of which in winter were two times greater than summer. Composition analyses indicated that DDTs and endosulfan were mainly from historical contribution. Historical use of technical HCH and new input of lindane were probably the source of HCHs in the East Lake. Most sampling sites of HCHs and DDTs were found to have the potential ecological risk based on levels specified in the sediment quality standards.     

循环流化床锅炉燃煤技术热电厂生命周期评价

运用生命周期评价方法,应用Gabi5.0软件对采用循环流化床锅炉燃煤技术的热电企业进行资源耗竭和环境影响分析,计算各生产单元生命周期清单的全球变暖潜值、酸化效应潜值、富营养化潜值、非生物资源耗竭潜值、人体毒性潜值以及光化学烟雾和臭氧生成潜值等主要环境影响类型,对燃煤发电过程进行生命周期评价。结果表明,全球变暖和非生物资源耗竭为发电运行过程中主要的环境影响因素,分别占53%和15.05%;锅炉燃烧阶段的环境影响最重,占整个生命周期影响值的77.12%,并且除生物耗竭潜值外的其他5项指标均为发电运行阶段各个单元中最高。采用SNCR脱硝技术减少燃烧过程中NOx的排放量,并对该技术方案进行生命周期评价,比较方案实施前后的环境影响。     

抗铬菌株的筛选鉴定及其生物学特性和吸附特性

利用微生物分离纯化技术,在培养基中加入不同浓度的Cr3+、Cr6+,经过长时间驯化,从污染土壤中筛选出2株对Cr具有较高抗性的菌株(A和B),对其进行了形态、生理生化特性及分子生物学鉴定,并研究了其最佳生长条件及对Cr3+的生物吸附规律。结果表明,菌株A和B分别为蜡状芽孢杆菌(Bacillus cereus)和米根霉菌(Rhizopus oryzae)。菌株A和B的最适生长pH值均为7,最适生长温度均为30℃,最佳装液量为80~100 mL(250 mL摇瓶)。在培养时间一定时,随着Cr3+浓度的增加,菌株对Cr3+的吸附率减少,而生物吸附量则逐渐增大;在Cr3+浓度一定时,随着培养时间的延长,菌体对Cr3+的吸附率呈现出先增加后减少的趋势,这与生物吸附量的变化趋势基本一致。在Cr3+浓度为100 mg/L时,菌株A和B对Cr3+的吸附率达到最大,分别为51.47%和46.36%。     

Biodegradation of beta-cypermethrin by a novel Azoarcus indigens strain HZ5

A novel strain HZ5 was isolated from the activated sludge of a pesticide manufacturer in Hangzhou, which was capable of degrading beta-cypermethrin (beta-CP). Based on its physiological characteristics and analysis of 16S rDNA gene, strain HZ5 was identified as Azoarcus indigens, which was a new genus that can degrade beta-CP effectively. Strain HZ5 could degrade beta-CP over a wide range of temperature (20 to 40°C) and pH (5.5 to 9.0), and the optimal temperature and pH were 30°C and 7.0. The highest degradation rate was approximately 70% of 50 mg/L beta-CP within 144 h at pH 7.0 and 30°C in MSM. An additional carbon source could enhance the biodegradation of beta-CP. Studies on biodegradation of the beta-CP showed no significant enantioselectivity. During the process, two main intermediate metabolites were produced by strain HZ5 and determined as 3-phenoxybenzaldehyde and 3-phenoxybenzoic acid by gas chromatography-mass spectrometry (GC-MS) analysis. The results indicated that strain HZ5 may have potential application in bioremediation of beta-CP polluted environment.     

袋式除尘器覆膜滤袋的缝制

袋式除尘器用覆膜滤袋在制作过程中需要特殊的工艺来保证表层覆膜不被破坏。本文从细节上探讨了如何保证覆膜滤袋的缝制质量,包括合理选择与制作滤袋的配件、缝制技术,以及如何正确选择缝线、针法、缝纫机和接缝,并注意同步输送等方面。     

火电厂脱硝的尿素制氨技术概述

选择性催化还原法（简称SCR）脱硝用还原剂氨气的制备原料主要有液氨、氨水及尿素三种。由于液氨工艺系统简单,运输、投资、运行成本较低,在目前的工程中已广泛应用,但存在的缺点是对系统的安全性要求较高。根据《危险化学品重大危险源辨识标准》（GB18218—2009）,液氨储量超过10吨视为重大危险源,因此,某些特殊地区（如北京、广州等地）要求还原剂制备系统采用安全性要求较低的尿素工艺。尿素工艺又分为热解法和水解法制氨,本文分别说明了两种工艺的技术原理、工艺流程。     

高加速应力试验装置技术参数的测量

气锤驱动的高加速应力试验装置,能产生温度和非高斯随机振动应力,其中振动应力是由多个气锤作六自由度运动产生的。一般用来进行高温步进、低温步进、快速温度变化、振动、快速温变和振动复合试验。目前国家标准和校准规程中均无关于该试验装置的技术参数的校准方法。本文结合试验装置的技术特点,提出了几个关于温度和振动技术参数的测量方法,如:温度偏差、温度波动度、温度均匀度、温度过冲量、温度变化速率、均方根加速度、横向振动比、功率谱密度等。     

氯消毒新工艺对大肠杆菌灭活作用的研究

研究了短时游离氯后转氯胺的联合消毒方法对大肠杆菌的灭活作用,并对其协同作用以及pH值和温度对协同作用的影响进行了探讨。结果表明：pH值在6．5～8范围内,温度不超过30℃时,短时游离氯后转氯胺的消毒方法对大肠杆菌的灭活具有协同作用,且随pH值的降低而加强,在低温下该方法的协同效果更加明显。