Uncurtaining the pivotal role of ABC transporters in diabetes mellitus

Environmental Science and Pollution Research - The metabolic disorders are the edge points for the initiation of various diseases. These disorders comprised of several diseases including diabetes,...     

Distribution and availability of potentially toxic metals in soil in central area of Belgrade,Serbia

Belgrade, capital city of Serbia, has over 1,600,000 inhabitants and over 400,000 vehicles trafficking every day on its streets. The investigation of soil pollution was performed by sequential extraction analysis to investigate the availability of potentially toxic metals (Zn, Cd, Pb, Co, Ni, Cu, Cr and Mn) under different oxidation and pH conditions. All investigated metals were mainly extracted from soils with neutral or acidic extractants. Serious pollution was observed along roads and streets with high traffic frequency, but Pb and Ni pollution was the highest since their concentrations exceed both soil Serbian standard and Canadian guidance values and is characteristic for all investigated sites. Cd, Cu, Cr and Zn concentrations are moderately high since they are between Canadian guideline and Serbian standard.     

Systematic Development of an Artificial Neural Network Model for Real-Time Prediction of Ground-Level Ozone in Edmonton,Alberta, Canada

Abstract

Ground-level ozone is a secondary pollutant that has recently gained notoriety for its detrimental effects on human and vegetation health. In this paper, a systematic approach is applied to develop artificial neural network (ANN) models for ground-level ozone (O₃) prediction in Edmonton, Alberta, Canada, using ambient monitoring data for input. The intent of these models is to provide regulatory agencies with a tool for addressing data gaps in ambient monitoring information and predicting O₃ events. The models are used to determine the meteorological conditions and precursors that most affect O₃ concentrations. O₃ time-series effects and the efficacy of the systematic approach are also assessed. The developed models showed good predictive success, with coefficient of multiple determination values ranging from 0.75 to 0.94 for forecasts up to 2 hr in advance. The inputs most important for O₃ prediction were temperature and concentrations of nitric oxide, total hydrocarbons, sulfur dioxide, and nitrogen dioxide.     

Analyses of phenolic compounds occurring in olive oil mill wastewaters by GC–MS

Phenolic compounds in olive oil mill wastewaters were analysed by HRGC–MS after extracting the acidified solution with ethyl acetate and derivatization with N,O-bis(trimethylsilyl)trifluoroacetamide. Both simple and complex phenols were detected with the latter being the most abundant. 1,2-dihydroxybenzene (catechol), p-hydroxyphenyl ethanol (tyrosol), 3,4-dihydroxyphenyl ethanol (hydroxytyrosol) and 4-hydroxy-3-methoxyphenyl ethanol (homovanillyl alcohol) predominated among the simple phenols using a gas chromatograph coupled with a mass selective detector.     

Residues of PCDD,PCDF, and PCBs in some marine organisms in Lake Temsah,Ismailia, Egypt

Residues of PCDDs/F, non-ortho, mono-ortho PCBs, and other PCBs were monitored in the tissues of mullet fish, bolti fish, bivalves and crab taken from Lake Temsah, at Ismailia, Egypt.

Results showed that 2,3,7,8 Tetra CDD and 1,2,3,7,8 Penta CDD were the most frequently detected PCDD congeners. Similarly, 2,3,7,8 Tetra CDF, 1,2,3,7,8 Penta CDF and 2,3,4,7,8 Penta CDF were the most frequently detected PCDF congeners. No relationship was apparent between the concentrations of detected PCDDs congeners and the degree of chlorination, except with crab samples in which an increase in the chlorination coincided with a decrease in the concentrations of the congeners.

In PCDF congeners, detected residues have had a reversed relationship with chlorination increase. In PCDD congeners, Octa CDD had the highest detected concentrations in the two fish species, while in the bivalves and crab, 2,3,7,8 Tetra CDD had the highest concentrations. The mullet fish had the highest total PCDDs concentration, at 0.398?pg/g fresh weight, followed by crab at 0.395?pg/g fresh weight, then bivalves and bolti fish at 0.187 and 0.062?pg/g fresh weight, respectively. In all the examined organisms, the total concentrations of PCDFs were much higher than the total concentrations of the PCDD congeners. The WHO–TEQ values were 11.92, 39.12, 25, and 3.6?pg/g fresh weight, for mullet fish, bolti fish, bivlaves and crab, respectively. The concentration of the mono-ortho congeners CB 118 was the highest detected of all non-ortho and mono-ortho PCBs congeners, with values of 0.382, 0.022, 0.231 and 0.357?ng/g fresh weight, in mullet fish, bolti fish, bivalves and crab, respectively. The WHO–TEQ concentrations were 0.799, 0.003?pg/g fw, 0.05?pg/g fresh weight, 0.676?pg/g, and 0.799?pg/g fresh weight, for the same species, respectively. The total concentration of PCBs 28, 52, 95, 99, 101, 105, 110, 118, 138, 146, 149, 151, 153, 170, 177, 180, 187 were 6.86?ng/g fresh weight for mullet fish, 0.2?ng/g fresh weight, for bolti fish, 2.72?ng/g fresh weight for bivalves and 2.8?ng/g fresh weight for crab, respectively.     

Potential environmental impact of dissolution of raw phosphate in sea water of the Gulf of Aqaba

Dissolution of raw phosphate (apatite) in sea water of the Gulf of Aqaba was investigated through lab incubation experiments. Three types from three different sources (Al-Hasa, Al-Abyad and Esh-Shydiya) have been used for these experiments. Impact of quantity, grain size, and source (type) of raw phosphate on dissolution rate were studied. Statistical analysis shows significant differences between the results obtained from comparing each two weights; as weight of apatite increased, dissolved inorganic phosphate-phosphorus (DIP) and fluoride in sea water solution increased. The differences between the dissolution rates of raw phosphate from the three sites were not significant while the differences between the different grain size fractions were significant. Dissolution rates were inversely related to particle size. Using a worst-case scenario, a conservative estimate of the maximum increase in DIP in seawater of the Gulf of Aqaba due to the apatite particles lost to the sea during ship loading resulted in DIP concentrations of 0.03 μM per year. As the residence time of the water in the Gulf of Aqaba is about one year, the DIP concentration will not increase by more than 0.03 μM under the estimated annual quantity of exported phosphate. Fluoride will not increase by more than 0.03 mg/l under the same conditions.     

Validation of QuEChERS-based method for determination of flusilazole residues in grape by high-performance liquid chromatography with photodiode array detector

A high-performance liquid chromatography with photodiode array detector analytical method was developed to determine the residue levels of flusilazole in grape and investigate the dissipation pattern and safety. The results showed that the mean recoveries were in the range of 86%–90%. Limits of detection and quantification were 0.008 and 0.02 mg/kg, respectively. The residue levels of flusilazole were best described by first-order rate kinetics and with half-lives ranging from 4.2 days (recommended dose) to 4.6 days (double the recommended dose). In conclusion, flusilazole at the recommended or even at double the recommended doses does not pose any apparent hazards to consumers.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Correction to: Municipal wastewater viral pollution in Saudi Arabia: effect of hot climate on COVID-19 disease spreading

Environmental Science and Pollution Research -