Pollution havens and industrial agglomeration

This paper examines the pollution haven hypothesis using a spatial-economy model of two countries and two sectors. The manufacturing sector generates cross-border pollution which reduces cross-sectoral productivity of agricultural goods, and lowers local income. We derive a demand-reducing effect that discourages firms to move to the country with laxer environmental regulations, in the absence of any comparative advantage. Our analysis also demonstrates that manufacturing agglomeration forces can alleviate the pollution-haven effect: a pollution haven may not arise if environmental regulation is slightly more stringent in the larger country.     

粉煤灰对垃圾填埋场黄土垫层的改性试验

通过击实、渗透试验得到粉煤灰改性-黄土的最佳配比为10%。对压实黄土和压实粉煤灰改性-黄土,分别用清水和渗滤液进行室内渗透试验,结果表明:渗滤液在压实粉煤灰改性黄土中的渗透系数≤1.0×10-7cm/s,在压实黄土中的渗透系数≤1.0×10-5cm/s,前者可作为填埋场防渗垫层,后者可作为填埋场防渗保护垫层。对COD、NH3-N的去除效果前者优于后者。     

Life cycle assessment of TV sets in China: A case study of the impacts of CRT monitors

Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China.     

区域高时空分辨率VOC天然源排放清单的建立

将中尺度气象模式MM5应用于估算VOC天然源排放的研究,建立了高时空分辨率VOC天然源排放清单的估算方法.根据方法需要,确定了我国部分树木排放异戊二烯和萜烯的标准排放因子,各植被类型排放各种VOC的标准排放因子,以及各植被类型季节平均的叶生物量密度.应用该方法估算了华南地区满足区域空气质量数值模拟要求的高时空分辨率VOC天然源排放清单.结果表明,华南地区夏季典型日的VOC天然源排放总量约1.12×10⁴t,VOC排放速率具有明显的时空分布,其中地理分布取决于植被类型及其分布,日变化规律则依赖于太阳辐射和温度的高低.并讨论了VOC天然源排放估算过程中误差的来源     

汽车排气污染问题的探讨

本文主要研究了汽车排气对城市造成的污染危害，在对本市汽车保有量发展趋势现状调查的基础上，探讨了汽车排气污染问题的主要污染源和主要污染成分，以及汽车污染控制各个阶段的控制技术     

云南稻核心种质F2主要形态性状变异及地理生态研究

种质资源是水稻育种的重要基因来源.掌握育种材料遗传背景信息,可为发掘优异种质,选育优良性状新品种提供依据.以548份云南稻核心种和云南主栽籼稻品利慎屯502(Oryza satica)、粳稻品种合系35(Oryzasatica)配制的杂种F2(498份)为材料,采用群体遗传学的方法,研究云南稻核心种质杂种F2代的11个形态性状的综合变异系数、遗传多样性指数(Shannon指数)及其地理分布.结果表明:(1)F2存在明显的性状分化和遗传变异,以有效穗、穗颈长、穗下节长、每穗实粒数、秕粒数、总粒数和结实率的综合变异系数高,遗传多样性丰富;(2)滇西南(临沧、思茅、德宏、西双版纳)和滇东南(文山、红河)的材料在表型性状上存在更大的分化,综合变异系数高,遗传多样性丰富;保山、昭通、曲靖次之;怒江、丽江、迪庆、大理最低.     

An integrated assessment method of urban drainage system: A case study in Shenzhen City, China

In recent years, the urban drainage system in China is facing the dual pressure of renovation and construction. This requires that the integrated assessment for the planning and operation of the urban drainage system is obligatory. To evaluate the urban drainage system, an integrated assessment methodology based on the analytic hierarchy process (AHP), integrated simulation, and fuzzy assessment is established. This method is a multi-criteria decision adding app roach to the assessment of the urban drainage system comprehensively. Through the integration of the Storm Water Management Model (SWMM), a simple wastewater treatment plant model, and a surface water quality model, an integrated modelling system for the urban drainage system is developed and applied as a key tool for assessment. Using the established method, a case study in Shenzhen City has been implemented to evaluate and compare two urban drainage system reno vation plans, the distributed plan and the centralized plan. Because of the particularity of this case study, the established method is not applied entirely. Considering the water environ mental impact, ecological impact, technological feasibility, and economic cost, the integrated performance of the distri buted plan is better. As shown in this case study, the proposed method is found to be both effective and practical.     

"珠三角"地区城市化对地下水水质影响案例研究

以珠海市东部沿海地区为例,探讨城市化地区地下水化学特征及污染状况的关系.结果表明土地利用类型与地下水水质变化密切相关.香洲区地下水化学组分差异较大,电导率范围为49.4~971 μS/cm.大部分地下水呈弱酸性,林地及果园用地地下水电导率较低,水化学类型多属于Na-HCO3型;老城区及新住宅区地下水类型多属于Ca-Mg-HCO3类型,电导率较高,受NO3-及Cl-污染较为严重.新住宅区地下水NO3-污染状况较老城区更为严重可能与旧村改造及市政排水设施不完善有关.除少数采样点外,地下水化学类型受季节变化影响不大.人为污染与自然风化过程是影响地下水化学类型的重要因素.     

云南粳稻核心种质杂种后代孕穗期耐冷性研究

以236份云南地方粳稻核心种质和云南主栽梗稻Oryza satica品种合系35配制的杂种F5、BC1F4、BC2F3和BC3F2为材料,在昆明自然低温平均17.8℃(冷害)条件下,对亲本及其后代进行孕穗期耐冷性研究.结果表明:①亲本耐冷性状间的相关性明显高于其杂种后代,不同世代间总体趋势为随着回交世代增加其性状间相关性减弱.在亲本及其杂种后代间耐冷指标性状穗颈长、穗下节长、每穗实粒数、每穗秕粒数与结实率均呈较高的(≥0.370)极显著(n=236,R0.01=0.181)相关.②株高、穗颈长、穗下节长等耐冷性状在亲本强弱耐冷系统群间的差异明显,表现为亲本耐冷性强的材料秆和穗较长、穗粒数较多,同一性状变异程度减小.但随着回交代数的增加,这些性状的平均值逐渐趋同于轮回亲本,差异减小.③穗颈长、穗下节长、每穗实粒数、每穗秕粒数与结实率在5个稻作区间的变化规律呈现一致性,亲本和F5的差异较大,而BC2F4、BC2F3和BC3F2的差异较小,且趋同于轮回亲本.通过连续回交,在BC3F1即可获得耐冷性状表现良好的材料.     

火电站污水处理厂最佳投药量优化试验研究

火电厂污水水质和水量变化较大,絮凝剂和助凝剂投药量准确与否决定去除效率和运行成本,本研究针对火电厂实际运行情况,通过静态和动态实验,比较去除效率。根据水质和水量的变化,找到最佳投药量,为污水处理厂的最佳运行提供了参考依据。