Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Degradation of antipyrine in the Fenton-like process with a La-doped heterogeneous catalyst

A La-doped Co-Cu-Fe catalyst was synthesized for the antipyrine (ANT) removal. The La-doped catalyst had higher ANT removal than the control (95% vs. 54%). La reduced the particle size and increased the specific surface area of catalyst. The aim of this study was to synthesize a novel lanthanum (La) doped catalyst and to investigate antipyrine removal in wastewater using the Fenton-like process with the catalyst. The La-doped Co-Cu-Fe catalyst was synthesized using the modified hydrothermal method. Results showed that the La-doped catalyst had higher specific surface area and lower particle size than the catalyst without La doping (i.e., the control) (267 vs. 163 m²/g and 14 vs. 32 nm, respectively). Under the conditions of catalyst dosage 0.5 g/L, H₂O₂ concentration 1.70 g/L, and NaHCO₃ 0.1 g/L, the antipyrine removal within 60 min using the Fenton-like process with the La-doped catalyst was much higher than that with the control (95% vs. 54%). The hydroxyl radical concentration with the La-doped catalyst within 60 min was two times higher than that with the control (49.2 vs. 22.1 mg/L). The high catalytic activity of La-doped catalyst was mainly attributed to its high specific surface area based on the X-ray photoelectron spectroscopy result. Our La-doped catalyst should have great potential to remove antipyrine in wastewater using the heterogeneous Fenton-like process.     

Magnetic graphene-based nanocomposites as highly efficient absorbents for Cr(VI) removal from wastewater

Environmental Science and Pollution Research - Due to the merits of their high adsorption and convenient separation, magnetic graphene-based composites have become a promising adsorbent in terms of...     

岩豆凝集素的纯化及其分子残基的化学修饰和活性关系

岩豆种子经侵取、硫酸铵分级、ＤＥＡＥ－纤维素离子交换和ＳｅｐｈａｄｅｘＧ－１００分子筛层析，获得ＦＰＬＣ上单一的凝集素样品，对此纯化的凝集素样品用Ｎ－溴代丁二酰亚胺、Ｎ－乙基顺丁烯二酰亚胺、二流苏糖醇，碘乙酸和对氯汞苯甲酸修饰其分子内的色氨酸和巯基．经计算，该凝集素分子内含有４个色氨酸和２４个流基，当色氨酸被修饰后其凝集活性全部丧失，而巯基被修饰后对其凝血活性无任何影响，表明巯基与凝集素分子的凝血活性无关，而色氨酸则是凝集活性所必需的基团．     

珠江三角洲经济区农业生态环境现状与对策

珠江三角洲经济区耕地锐减，水资源分布不均，工业和农业污染严重，农业生态环境日趋恶化。经济发展不平衡，农业趋于萎缩状态，本文针对这些问题，提出了珠江三角洲农业生态环境治理的指导思想、发展目标和基本措施。     

燃煤电厂排放颗粒物中重金属形态的研究

本文分析用模拟酸雨浸提和Ｔｅｓｓｉｅｒ形态分离法，对燃煤电厂排放颗粒物中重金属形态进行了研究。结果表明，痕量金属绝大部分以稳定态存在，微米级飞灰中有较大活性的形态高于灰渣，煤燃烧高温条件使颗粒物中活性较大的形态含量减小。     

推进GIS在环境规划中应用的探讨

本文在分析了地理信息系统引入环境规划带来的优越性的基础上，通过对目前我国环境领域中ＧＩＳ应用现状及实例研究，得出要深化ＧＩＳ在我国环境科学中的应用，就必须加强ＧＩＳ上的模型分析，并最终建立起ＧＩＳ模型库。     

论流域水质与水量集成规划

“水量”与“水质”是流域大系统的两个特征,水环境研究偏重于水质,而水资源研究则更偏重水量,但是“质”与“量”是不能截然分开的,它们之间既相互关联,又互影响,相互制约,构成矛盾的统一体,基于这一出发点,本文从规划方法学的历史发展与流域水环境大系统的结构分析入手,系统阐述了提出流域水质与水量集成规划基本概念,目标及其策略与技术路线。     

分光光度法测定COD_(Cr)的试验条件选择

用分光光度法测定水中化学需氧量ＣＯＤＣｒ,通过正交试验选择氧化的最佳选择。试验结果表明对ＣＯＤＣｒ值为５０～１０００ｍｇ／Ｌ的水样：氧化剂Ｋ２Ｃｒ２Ｏ７用量为０．２０～０．４０ｍｏｌ／Ｌ,催化剂Ａｇ２ＳＯ４用量为１０ｇ／ＬＨ２ＳＯ４,消解时间１０ｍｉｎ,加热温度１８０℃。用ＣＯＤＣｒ为１３８ｍｇ／Ｌ的质控标样进行验证试验,其绝对误差为０．５～３．０ｍｇ／Ｌ。与标准方法相比用分光光度法测定ＣＯＤＣｒ具有分析误差小,省时、省力,节约药剂的特点。