催化剂含氨氮污水治理技术的探讨

对高浓度氨氮污水的处理技术进行比较，结合兰州石化公司催化剂污水排放的实际和目前开展的治理研究，提出了综合治理催化剂含氨氮污水的设想。     

沉淀—树脂吸附法处理对氨基偶氮苯盐酸盐生产废水的研究

对氨基偶氮苯盐酸盐（ＰＡＢＳ）是生产染料的重要中间体。在ＰＡＢＳ生产过程中，排放出高浓度（ＣＯＤ４万～８万ｍｇ／Ｌ）、高色度（４万～８万）、高毒性（含苯胺和对氨基偶氮苯）和高氯（Ｃｌ－４万～１０万ｍｇ／Ｌ）的废水。利用中和沉淀—大孔吸附树脂吸附法进行了处理工艺的小试研究。结果表明，废水色度去除率达到９９９％，降到２０以下；出水中基本不含对氨基偶氮苯（ＰＡＢ）；出水中苯胺的浓度降到３ｍｇ／Ｌ。ＧＣ／ＭＳ分析的结果表明，乙醇脱附液中苯胺是最主要的有机物，所以利用该工艺能实现苯胺的回收。     

矿井通风系统模糊可靠性研究

定义模糊可靠度为一个服从正态分布的模糊数，并以模糊数作为通风系统的各风路可靠度，进而提出了矿井通风系统的模糊可靠度计算方法。同时在置信水平上，确定矿井通风系统的普通可靠度置信区间。若＝１，则模糊可靠度计算转化为可靠度计算。     

基于AHP的环境经济评价在污水处理厂清洁生产中的应用研究

环保类项目主要价值体现为环境效益,清洁生产中高费方案分析中,单纯分析经济费用效益,经常为不可行方案.文章以污水处理厂3个不同的清洁生产方案(增加化学除磷、污泥深度脱水、增加除臭设施)为例,对他们的环境效益进行了货币化估值,并将AHP确定权重的方法引入环境影响货币化估值中,对纳入环境价值的方案分析其内部收益率,从而分析清洁生产中方案的可行性.分析得出化学除磷和污泥深度脱水的内部收益率分别为12.89%和13.54%,具有可行性,因此优选实施污泥深度脱水方案.     

漓江沉积柱重金属垂向分布特征及污染评价

对桂林漓江3个采样点沉积柱状沉积物中主要重金属元素(Cd、Cr、Cu、Zn、Pb、As和Ni)的垂向分布进行了测定。结果表明:7种重金属元素具有相似的垂向变化特征;横向上表现为靠近市区的含量高远离,市区的含量低。地积累指数评价结果显示,远离市区的沉积柱7种金属污染程度较轻,仅有Cd和Ni属于无～中污染程度。临近市区的沉积柱形成污染的元素为Cd、Cu、Zn、Pb和As,主要集中在底层和次表层。     

K_2Cr_2O_7法和紫外分光光度法测定污水COD的对比研究

分别利用重铬酸钾法、重铬酸钾紫外分光光度法和紫外分光光度法测定污水的COD极差分别为2.43mg/L、1.19 mg/L和4.72 mg/L,RE%分别为0.84%、0.53%和1.36%,重铬酸钾紫外分光光度法和紫外分光光度法的线性范围分别在0~280 mg/L和0~400 mg/L.结果表明:重铬酸钾紫外分光光度法测定的准确度和精密度最高,简化了用标准溶液进行标定的步骤,缩短了实验时间;紫外分光光度法测定的结果准确度和精密度相对差一些,但是快速、操作简单、节省试剂,为广大环境工作者提供借鉴参考的实例。     

某木材加工企业安全评价中的危险因素辨识

木材加工生产中危险有害因素较多,发生人员伤害事故的风险比较高. 用安全系统的理论和方法,以某木材加工企业生产过程为研究对象,通过危险有害因素辨识,对造成人员伤害的危险事件发生的可能性和导致伤害后果的严重程度进行了分析,为提出相应的安全对策措施提供了依据.     

地铁多线换乘车站火灾模型实验研究—(1)模型装置设计

为研究地铁网络化运营枢纽车站火灾烟气扩散特征和防排烟技术,根据工程资料和标准规范对典型多线换乘车站进行1∶10火灾实验模型设计,并依据设计方案完成车站模型主体结构和通风排烟系统的搭建,同时在各个防烟分区设计安装温度、流速、烟气浓度和热辐射测量装置,可实现对“T”形、“十”形和“L”形换乘等不同换乘形式车站的火灾场景模拟和危险参数测量。研究结果表明:该模型装置能够开展一系列针对不同换乘形式和通风模式的火灾实验,对于全面揭示大型换乘车站火灾烟气运动规律、验证并优化火灾防排烟设计方法、支撑复杂结构枢纽车站火灾烟气控制技术具有重要意义。     

Efficient degradation of rhodamine B using modified graphite felt gas diffusion electrode by electro-Fenton process

The electro-Fenton (EF) process treatment of 0.1-M (rhodamine B) RhB solution was studied with different graphite cathode materials, and graphite felt (GF) was selected as a promising material in further investigation. Then, the degradation performances of gas diffusion electrode (GDE) and graphite felt (GF) were compared, and GDE was confirmed to be more efficient in RhB removal. The operational parameters such as Fe²⁺ dosage and current density were optimized, and comparison among different modified methods—polytetrafluoroethylene-carbon black (PTFE-CB), polytetrafluoroethylene-carbon nanotube (PTFE-CNT), electrodeposition-CB, and electrodeposition-CNT—showed 98.49 % RhB removal by PTFE-CB-modified cathode in 0.05 M Na₂SO₄ at a current density of 50 A/m² and an air flow rate of 1 L/min after 20 min. Meanwhile, after cathode modified by PTFE-CB, the mineralization efficiency and mineralization current efficiency performed absolutely better than the pristine one. Cyclic voltammograms, SEM images, contact angles, and BET surface area were carried out to demonstrate stronger current responses and higher hydrophilicity of GF after modified. The value of biochemical oxygen demand/chemical oxygen demand (BOD₅/COD) increased from 0.049 to 0.331 after 90-min treatment, suggesting the solution was biodegradable, and the modified cathode was confirmed to be stable after ten circle runs. Finally, a proposed degradation pathway of RhB was put forward.     

Efficacy of Si fertilization to modulate the heavy metals absorption by barley (Hordeum vulgare L.) and pea (Pisum sativum L.)

Silicon-based fertilizers and soil amendments can have direct and indirect positive influences on cultivated plants. The solid forms of Si-based substances, the most widespread in use, are efficient only at high application rates due to their low level of solubility. Several types of Si-based substances such as fumed silica, slags from the iron and steel industry, modified slags, and a Si-rich product were tested using barley and pea as silicon accumulative and non-accumulative plants, respectively, at two application rates. The plants were grown under toxic concentrations of heavy metals in a greenhouse. Si-rich materials high in water-soluble Si had a positive effect at both the low and high application rates, and for both plant species. This type of substance can be regarded as Si fertilizer, demonstrating greater efficiency at a low application rate and lessened efficiency at a high application rate for protection of the cultivated plants against accumulation of the heavy metals.