柴油机排放碳颗粒物的催化燃烧

在热天平装置上考察了柴油机和碳颗粒物燃烧催化剂的活性，讨论了样品制备因素对样品失重的影响，这些因素包括碳颗粒物组成、催化剂栽体、催化剂与碳颗粒物质量比，着重筛选了催化剂的组份，得到了组份催化剂ＣｕＣｌ２－ＫＣｏ－ＮＨ４ＶＯ３其５５０℃焙烧后能使样品的Ｔｍ和Ｔｆ值都降低１８０℃以上，并对催化剂的热稳定性进行了研究。     

蔗糖厂酒精废醪液资源化浓缩治理

酒精废醪液浓缩法是一种资源化处理技术。将废醪液用石灰乳中和后，经多效蒸发加以浓缩，然后或者直接干燥为干粉，或者与干蔗髓混匀后干燥成蔗髓干粉，或者直接用作复合肥原料。此技术已在广东、广西和云南的部分糖厂使用，均取得较好的环境、社会和经济效益。     

重金属在牡蛎(Crassostrea virginica)中的生物积累及其影响因素的研究

牡蛎软体，贝壳和沉积物中Ｃｄ、Ｃｒ、Ｃｕ、Ｆｅ、Ｍｎ、Ｐｂ和Ｚｎ等重金属元素被同步分析研究，研究结果表明，重金属在牡蛎中的生物积累是牡自身的新陈代谢、重金属元素的地球化学性质和环境诸因素综合影响的结果，其中牡蛎斩生理作用对重金属在软体中的积累产生的影响尤为重要，而贝壳中重金属的积累对来自环境的影响更为敏感。     

建材资源开发的生态环境补偿费探讨

应用新的资源价值观念与环境经济学中ＭＯＣ框架及其它理论，给出了建材资源的生态环境补偿费的定义与确定方法，建立了相应的理论模型。在此基础上，根据不同地区的经济发展水平与环境现状等实现情况，用认可系数对计算的补偿费进行修正。     

溶剂萃取--蒸汽蒸馏法处理含油污泥

为了实现含油污泥的资源化和无害化，对含油污泥进行了室温下的三氯甲烷溶剂萃取，然后在温度３２０～４８０℃、压力０．２ＭＰａ下进行水蒸汽蒸馏０～９０ｍｉｎ的掊油实验，结果表明含油污泥中加入３倍的萃取溶剂进行萃取，再按１ｇ油泥加０．５ｍＬ的水在４００℃下蒸馏，４５ｍｉｎ效果较好，脱油率达８０％～９５％。     

二步法腈纶废水有机污染物组成分析研究

采用色谱技术,对二步法腈纶生产废水中所含的有机污染物,进行了系统的分析研究.结果表明,二步法腈纶废水的可生化性极差,其BOD5/CODcr的比值在0.1～0.2之间.其中所含有机污染物主要有芳香族及酚类的2,6-二(1,1-二甲基乙基)酚、硫代邻氨基苯酚、苯甲酸苄酯、邻二甲苯;腈类的丙烯腈、丁二腈、戊腈、己腈、β,β＇-亚氨基二丙腈;烷烃类的壬烷异构体、十二烷及其异构体、十三烷及其异构体、十五烷及其异构体、十六烷;其它有N,N-二甲基乙酰胺、2,2'-二硫基乙醇、硫醇(丙硫醇、乙硫醇)、丙烯酸甲酯、甲基丙烯磺酸钠等.     

沼泽红假单胞菌H3对酸性红B2GL染料的厌氧脱色和降解作用

从印染厂污泥中分离到一株沼泽红假单胞菌（ＲｈｏｄｏｐｓｅｕｄｏｍｏｎａｓｐａｌｕｓｔｒｉｓＨ３），在光照厌氧条件下该菌生长细胞可将１００ｍｇ／Ｌ酸性红Ｂ２ＧＬ染料去除到３０ｍｇ／Ｌ．完整细胞脱色的最适条件为ｐＨ７０，温度３０℃，细胞浓度２０—２５ｍｇ／ｍＬ（湿重）．低浓度的阳离子对脱色影响不大．在通Ａｒ气使严格厌氧和加有还原性辅酶Ｉ的条件下无细胞提取液的脱色活性最高，比活率为１５４×１０－２ｍｇ／（ｍｇ·ｈ）．根据降解产物的分析，推断了该菌对酸性红染料的降解代谢途径．     

煤中部分潜在毒害微量元素在表生条件下的化学活动性

利用连续化学浸取实验方法，对采自贵州省二叠经龙潭组的３２个煤样中的１０种潜在毒害微量元素化学的活动性进行了研究，结果表明：煤中Ｈｇ、Ａｓ、Ｓｅ、Ｃｄ等元素具有极强的化学活动性，其中平均８３．８％的Ｈｇ、９３．５％的Ａｓ、８０．３％的Ｓｅ．６３．３％的Ｃ在．１％的Ｃｕ的８６．８％的Ｐｂ可以被带出煤中而进入表生环境；煤中Ｚｎ的化学活动性次之，只有平均４６．６％的Ｚｎ可能迁移进行环境中；Ｔｌ、Ｃｒ、Ｎｉ     

Groundwater pollution due to discharge of tannery effluents in Upper Palar basin, Tamilnadu, India: an assessment through mass transport modeling

The groundwater regime in Upper Palar basin, Tamilnadu has been highly contaminated in several locations due to discharge of effluents from a large number of tanneries. At some places total dissolved solids (TDS) concentration in groundwater was found as high as 8000 mg/l. Transmissivity and storativity of the regional aquifer were estimated at a few locations. The porosity and dispersivity values were not determined in the field. These parameters were assumed based on data available for similar geological formations elsewhere. The aquifer conceptualization thus arrived at formed the basis of a numerical groundwater flow model which was constructed using the finite difference method. The flow model was calibrated for steady state and then for transient condition for the period of 1984-92. The computed heads and calibrated parameters of the flow model were used to compute groundwater velocities. The migration of contaminants for a 20 year period was computed using the hydraulic heads and effective porosity value in a pathline model using FLOWPATH software. Mass transport model was constructed using Method of Characteristics (MOC) computer code in a separate model. The seepage rate of effluent is assumed at a rate of 30% of that discharged on the surface. The mass concentration of solute in the effluent reaching the water table was assumed as 40%, the same as in the surface effluent. The mass transport model was calibrated for a 20 year period. Prediction of contaminant migration from different clusters in the basin was analyzed. The prediction results indicated elevated TDS concentration of more than 4000 mg/l from most clusters. Also the area of the contaminated zone is likely to double in 20 years from contaminated zone of 1992.     

三槽式切换氧化沟运行工况数学模式及应用

三槽式切换氧化沟运行工况呈周期性的变化。根据理论分析，建立了各槽活性污泥浓度变化及相互关系的数学模式，并进行了验证。同时就数字模式在周期程序设置及排泥方式选择时的应用做了说明。