How does “the Belt and Road” and the Sino-US trade conflict affect global and Chinese CO2 emissions?

Environmental Science and Pollution Research - In the context of the rapid development of the Belt and Road (B&R) Initiative, the continuous transfer of Sino-US trade to the B&R...     

High crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin for heavy metal adsorption: its characteristics and mechanisms

Environmental Science and Pollution Research - A lower expansive heavy metal adsorbent, high crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin (HCAA), has been...     

Effects of rainfall on surface environment and morphological characteristics in the Loess Plateau

Environmental Science and Pollution Research - Slope failure is a one of major process that causes severe landform variation and environment variation, and slope failure has become a major hidden...     

NOx attenuation in flue gas by •OH/SO4•--based advanced oxidation processes

Environmental Science and Pollution Research - The combustion of fossil fuels has resulted in rapidly increasing emissions of nitrogen oxide (NOx), which has caused serious human health and...     

Effects of reciprocal hybridization on cadmium accumulation in F1 hybrids of two Solanum photeinocarpum ecotypes

In this study, farmland and mining ecotypes of Solanum photeinocarpum (a potential cadmium (Cd) hyperaccumulator plant) were reciprocally hybridized each other, and the Cd accumulation characteristics of the F1 hybrids were studied. In pot experiments, higher biomasses and Cd extraction abilities were found for two S. photeinocarpum F1 hybrids than for the parents, but the Cd contents in various organs were lower in the hybrids than the parents. However, the differences between the Cd contents in the two hybrids were not significant. The antioxidant enzyme (superoxide dismutase and peroxidase) activities were higher for the S. photeinocarpum F1 hybrids than the parents. Less DNA methylation was found in the hybrids than the parents because more demethylation occurred in the hybrids than the parents. The biomass, Cd content, and Cd extraction ability effects in field experiments were similar to the effects in the pot experiments. It was concluded that reciprocally hybridizing different S. photeinocarpum ecotypes improved the ability of S. photeinocarpum to be used to phytoremediate contaminated land.

     

不同装煤方式和炭化室高度的焦炉周边环境空气总悬浮颗粒物碳组分特征

研究了山西省4座典型焦炉周边环境空气中总悬浮颗粒物(TSP)碳组分特征,分析了不同装煤方式和炭化室高度对其的影响。结果表明:(1)焦炉周边环境空气中TSP质量浓度为711.95～2 938.41μg/m3,其中有机碳(OC)、元素碳(EC)的质量浓度分别为189.45～595.90、285.38～806.71μg/m3,总碳占TSP的质量分数为44.81%～67.45%;捣固焦炉周边的TSP及其碳组分浓度高于顶装焦炉,炭化室高度越高的焦炉周边环境空气中TSP及其碳组分浓度越低。(2)4座焦炉周边环境空气TSP中OC和EC质量比为0.66～1.04,说明焦炉周边环境空气中碳组分以一次污染为主。(3)4座焦炉周边环境空气TSP中碳组分的分歧系数为0.092～0.490,均小于0.5,总体来说装煤方式和炭化室高度都对焦炉周边环境空气TSP中碳组分的分布有一定影响,特别是装煤方式和炭化室高度都不同的焦炉周边环境空气TSP中碳组分差异较大。     

电气石强化生物膜系统处理中药废水的启动及生物膜特性分析

将电气石与生物膜技术结合构建电气石强化生物膜系统处理中药废水,通过电气石调节生物膜微环境,以增强微生物代谢活性,从而提高了反应系统的处理能力。结果表明:电气石强化厌氧流化床(AFBR)反应系统经历160 d完成中药废水的启动实验,反应系统COD去除率达到87.8%,容积负荷达到5.34 kg·(m3·d)~(-1),生物膜产甲烷活性达到126.4 mL·(g·d)~(-1);电气石强化好氧流化床(FBR)反应系统统经历35 d完成启动实验后,出水COD稳定在76.5 mg·L~(-1),反应系统对应的COD去除率和容积负荷分别为90.3%和1.4 kg·(m~3·d)~(-1)。中药废水依次经AFBR和FBR处理后,出水水质满足《中药类制药工业水污染物排放标准》(GB 21906-2008)排放要求。以上结果可为实际工程项目提供理论依据和参考。     

一起直流单极连续3次闭锁故障仿真分析

宁夏电网目前已接入3回直流,其中第1回直流为±660 kV接入,容量为4 GW;第2回直流为±800 kV,容量为8 GW;第3回直流为±800 kV,容量为10 GW,并正式形成了送端直流群。随着特高压直流的接入,宁夏电网发生直流故障的次数逐渐增多。针对第2回直流某次典型单极连续3次闭锁故障,详细介绍了事故发生的过程和故障前后宁夏电网运行方式及系统动态特性的变化情况。利用PSASP程序建立宁夏电网仿真模型,还原了故障前电网运行方式,并仿真再现了故障后的电网动态过程。通过仿真与实测结果的对比,进一步明确了直流故障期间电网特性的变化情况,同时验证了仿真模型的准确性。     

颗粒流冲击力研究现状及讨论∗

颗粒流包括滑坡、泥石流、碎屑流、雪崩等,通常对桥梁、公路、居民区具有较大危害。分析了颗粒流的运动过程及其侵蚀、堆积和爬高等特性;此外,对颗粒流冲击力计算模型及其野外观测结果进行阐述。结果表明:现有冲击力计算模型认为冲击力在结构全断面呈均匀分布,忽略了颗粒流的运动特性对冲击力的影响;大块石冲击力计算忽略了颗粒破碎和浆体垫层效应对冲击力的影响,造成巨大的计算误差;由于传统传感器的缺陷,现有野外观测结果也存在较大误差。对此本文提出野外观测需要通过引入或开发新式压力传感器以得到更准确的颗粒流冲击力大小及其分布形式,从而更精确的修正理论模型;理论计算模型研究工作需要考虑颗粒流浆体的垫层效应、流体与基底的相互作用及块石冲击破碎等对流体冲击力的影响,从而推导出更准确的冲击力计算模型,指导工程实际。     

速差自控器新标准使市场更规范——GB 24544-2009《坠落防护速差自控器》解读

1 防坠落的现状 坠落事故是一种较为常见的事故类型,在发生的各类生产安全事故中往往占有较大比例. 目前较为常见的防坠落装备包括速差自控器、自锁器、安全带、防坠网等.坠落防护装备相比其他个体防护装备品类而言,关注度较低,而速差自控器更是防坠落装备中的细分领域.所以,在很长一段时期内,速差自控器没有被相关方给予足够的重视....