Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

TiO2@palygorskite composite for the efficient remediation of oil spills via a dispersion-photodegradation synergy

• A novel and multi-functional clay-based oil spill remediation system was constructed. • TiO₂@PAL functions as a particulate dispersant to break oil slick into tiny droplets. • Effective dispersion leads to the direct contact of TiO₂ with oil pollutes directly. • TiO₂ loaded on PAL exhibits efficient photodegradation for oil pollutants. • TiO₂@PAL shows a typical dispersion-photocatalysis synergistic remediation. Removing spilled oil from the water surface is critically important given that oil spill accidents are a common occurrence. In this study, TiO₂@Palygorskite composite prepared by a simple coprecipitation method was used for oil spill remediation via a dispersion-photodegradation synergy. Diesel could be efficiently dispersed into small oil droplets by TiO₂@Palygorskite. These dispersed droplets had an average diameter of 20–30 mm and exhibited good time stability. The tight adsorption of TiO₂@Palygorskite on the surface of the droplets was observed in fluorescence and SEM images. As a particulate dispersant, the direct contact of TiO₂@Palygorskite with oil pollutants effectively enhanced the photodegradation efficiency of TiO₂ for oil. During the photodegradation process, •O₂⁻and •OH were detected by ESR and radical trapping experiments. The photodegradation efficiency of diesel by TiO₂@Palygorskite was enhanced by about 5 times compared with pure TiO₂ under simulated sunlight irradiation. The establishment of this new dispersion-photodegradation synergistic remediation system provides a new direction for the development of marine oil spill remediation.     

用于青霉素废水处理的高效菌株的分离及特性研究

从某制药厂污水处理站的活性污泥中筛选出两株能以青霉素废水中有机物为惟一碳源和能源的高效降解菌k1和k2。通过形态及生理生化特征分析,初步鉴定2株菌为芽孢菌,其中k2为短小芽孢杆菌（bacillus pumilus）。2株菌的最适pH值分别为8和7,温度均为35℃,当废水含量50%时,菌株k1和k2对青霉素废水的COD去除率分别为79%和81%。单菌株与混合菌株对废水的降解特性试验表明,前48 h混菌对废水的去除率不及单菌株,而48 h后混合菌株去除率高于单菌株,60 h时达到最高为85%。     

Occurrence of PAHs, PCBs and organochlorine pesticides in the Tonghui River of Beijing, China

Tonghui River, a typical river in Beijing, People's Republic of China, was studied for its water and sediment quality, by determining the levels of 16 polycyclic aromatic hydrocarbons (PAHs), 12 polychlorinated biphenyls (PCBs) and 18 organochlorine pesticides in water and sediment samples. Total PAHs, PCBs and organochlorine pesticides concentrations in water varied from 192.5 to 2651 ng/l, 31.58-344.9 ng/l and 134.9-3788 ng/l, respectively. The total PAHs, PCBs and organochlorine pesticides concentrations in surficial sediments were 127-928 ng/g, 0.78-8.47 ng/g and 1.79-13.98 ng/g dry weight, respectively. The results showed that the concentration of these selected organic pollutants in sediment was higher than those in surface water. It may be due to the fact that organic hydrophobic pollutants tend to stay in the sediments. The PAHs were dominated by 2-, 3-ring components in water samples and by 3- and 4-ring compounds in sediment. For organochlorines, alpha-HCH, delta-HCH, Heptachlor, Endosulfan II, DDT are the major organochlorine pesticides in water while Heptachlor, Dieldrin and DDE composed of 95% of total organochlorine pesticides in sediment. For HCHs (HCHs=alpha-HCH+beta-HCH+gamma-HCH+delta-HCH), the predominance of alpha-HCH of total HCHs were clearly observed in water and sediment. PCB18, PCB31 and PCB52 were predominant in water, on average these compounds collectively accounted for 67% of total PCBs. But in sediment, the predominant compounds were PCB28, PCB31 and PCB153, which accounted for 71% of total PCBs in sediment. The levels of micro pollutants in our study areas were compared with other studies.     

Fenton试剂处理选矿废水机理研究

研究了用Fenton试剂处理选矿废水中残余的黄药,分别考查了氧化时间、反应初始pH值、Fe2+浓度及H2O2用量对黄药降解效果的影响,用正交试验确定了4个因素的最好条件。结果表明:初始pH值和H2O2用量是影响去除效果的主要因素;氧化时间为60 m in,反应初始pH=4,[Fe2+]=20 mg/L,[H2O2]=20 mg/L,黄药的浓度为125 mg/L时,黄药的去除率达到99.5%;初步探讨了Fenton试剂净化废水中黄药的机理是.OH自由基先将黄药氧化为过氧化黄原酸盐,再将其氧化为CO2,黄药得到去除。     

3种短链脂肪酸对活性污泥储存PHA的影响

采用经乙酸钠驯化培养具有一定聚羟基烷酸酯(PHA)储存能力的活性污泥,考察乙酸、丙酸和丁酸3种短链脂肪酸,以及乙酸、丁酸分别与丙酸按1∶1、1∶2、2∶1比例组合成的6种混合酸作为碳源时对活性污泥中PHA的储存和转化的影响。实验结果表明,在3种短链脂肪酸中,以丁酸为碳源得到活性污泥PHA储存量最高,为40.53 mg/g;在混合酸中,乙酸与丙酸按1∶2组合时,系统PHA储存量最高,为773.4 mg/g。混合酸相对于单一的脂肪酸碳源更有利于活性污泥储存PHA。在混合酸总量一定的条件下,随着丙酸比例的增加,乙酸与丙酸混合比丁酸与丙酸混合更有利于微生物的PHA储存。     

玉米芯掺杂对污泥基活性炭性能的影响

针对以城市污水厂剩余污泥为原料制备的污泥基活性炭微孔性差、比表面积低的缺陷,将一定比例玉米芯掺杂到污泥中以期改善活性炭性质。通过对活性炭的比表面积、孔结构、碘值、表面官能团测定以及表面电镜分析,探讨了不同比例玉米芯掺杂对活性炭物理化学性质的影响,并以苯酚和硝基苯为目标物,对比考察所制活性炭对有机物的吸附性能。实验结果表明,随着玉米芯掺杂比例的提高,活性炭微孔体积及比表面积明显增大,但活性炭表面官能团种类及数量变化不明显。所制活性炭表面都以酸性基团为主。结果显示苯酚和硝基苯吸附值与活性炭表面酸性基团含量关系密切,因此,玉米芯的掺杂对苯酚和硝基苯的吸附没有明显的促进作用。     

巯基化合物在万寿菊镉解毒中的作用

采用水培实验方法研究了万寿菊体内镉积累和解毒与巯基化合物含量的关系。万寿菊植株分别在镉浓度为0、0.1、0.5、2和8 mg/L的营养液中暴露7 d,测定了根、茎、叶中镉、非蛋白巯基(NPT)、半胱氨酸(Cys)、γ-谷氨酰半胱氨酸(γ-EC)、谷胱甘肽(GSH)和植物络合素(PCs)的含量。植物根、茎、叶中镉含量都随着镉暴露浓度的增加而增加。当溶液中镉浓度较低(0.1～2 mg/L)时,茎叶中NPT、PCs、Cys和γ-EC含量随着镉浓度增加而增大;当镉浓度较高(8 mg/L)时,茎叶中PCs含量迅速降低,GSH含量大幅度增高。在根部,这些巯基化合物的含量几乎不受镉处理影响,且含量较低。以上研究结果表明:PCs在万寿菊镉的解毒机制中发挥一定的作用,暴露于高浓度的镉,GSH比PCs起着更为重要的解毒作用。     

改性TiO_2光催化降解三苯甲烷类污染物

以硫酸钛为原料采用水热法制备了掺Fe3＋TiO2晶体粉末,采用X射线衍射仪（XRD）对样品的结构进行了表征。在可见光条件下,用溴酚蓝、甲基绿、甲基蓝、孔雀石绿、甲基紫和碱性品红等6种典型三苯甲烷类化合物为目标降解物,研究了以自制的掺Fe3＋TiO2晶体粉末对它们的催化降解作用。实验结果表明,制备的掺Fe3＋TiO2晶体属于锐钛矿型。6种化合物的光催化降解反应遵循拟一级动力学规律,且可用Langmuir-Hinshelwood（L-H）动力学模型描述,其表观反应速度常数（k）的大小顺序为：溴酚蓝〈甲基绿〈甲基蓝〈孔雀石绿〈甲基紫〈碱性品红,大小变化次序与其半衰期t1/2成反比,并从分子结构上对它们的降解规律进行定性解释。     

锰污染土壤根际微生物分离及耐Mn2+特性

为了研究锰污染土壤的生物修复,在湘潭锰矿不同植物根际土壤中分离得到7株真菌和8株细菌,依次命名为F1-7和B1-8。经耐锰性能测定,获得高耐锰性真菌3株,F3-5、细菌3株,B1、B2和B7。其中,F3耐锰浓度最高可达600mmol/L,细菌B7最高耐锰浓度为80 mmol/L。当Mn2+浓度小于300 mmol/L时,对3种真菌的生长均具有一定的促进作用,高于此浓度时,产生较大程度的抑制作用。在低Mn2+浓度(20~40 mmol/L)条件下,Mn2+对3种细菌的生长均表现出一定的促进作用,尤其是对B2作用明显。当Mn2+浓度逐渐增加到80 mmol/L时,抑制作用明显。在Mn2+浓度为300mmol/L时,F3对锰的吸附率约为60%,达到峰值。而在Mn2+浓度为60 mmol/L时,细菌B2对锰的吸附率约为70%,达最大值。