抗灾减灾效益估计方法探讨

从综合角度阐述减灾效益的概念,进而以减灾效益内容为基础,提出了估计减灾效益的方法。     

企业环保信用评价的发展历史与现状思考

回顾了国内外企业环保信用评价发展历史,指出与国外相比,我国企业环保信用评价起步较晚,目前各地区评价标准主要以监管性指标和处罚决定为依据,其中以监管性指标评价较全面但操作繁琐,以处罚决定评价更为客观但对中小型企业监管力度较低。提出,我国企业环保信用评价体系还需要进一步优化,统一评价标准,完善动态评价机制,增强企业与责任人的关联,以促进社会信用体系向更为完备的方向发展。     

秦巴山区降雨侵蚀力时空变化特征

降雨侵蚀力时空变化特征的研究对区域土壤侵蚀风险评估及水土保持规划具有重要的意义。利用秦巴山区及周边地区共63个气象站1961~2016年的逐日降雨量数据计算各站的降雨侵蚀力,借助Kriging空间插值法、Mann-Kendall趋势检验、Pettitt突变检验等方法分析了秦巴山区降雨侵蚀力的时空变化特征。结果表明：秦巴山区年均降雨侵蚀力为3 696 MJ·mm/(hm²·h·a),年内变化呈单峰型,7月最大,占全年的26.6%;四季中,夏季最大,冬季最小。代际间,20世纪80年代的降雨侵蚀力最大,90年代最小。年际间,年降雨侵蚀力存在明显的阶段性,但未表现出显著的趋势性和突变性特征。秦巴山区多年平均降雨侵蚀力呈南高北低的分布格局,不同地区年均降雨侵蚀力变化于787~8 858 MJ·mm/(hm²·h·a)之间;整体而言,年降雨侵蚀力随纬度增加而减小,随海拔升高而减小。     

基于资源环境承载力与开发建设适宜性的国土开发强度研究——以江苏省为例

以江苏省为研究区域,运用特尔斐法、线性拟合预测、Kaya分解模型和多要素空间叠置分析等方法,测算未来各地市基于资源环境承载力与开发建设适宜性的可承载国土开发强度,进而识别影响区域建设用地扩张的限制性因素。结果表明：（1）不同资源环境要素对江苏省建设用地扩张的约束作用呈现显著差异,水资源对国土开发的承载水平总体稍高于环境承载水平,而碳峰值承载水平为三者最低;（2）“不适宜”开发区主要分布在湖泊湿地和沿海滩涂地区,“适宜”开发区则以苏锡常环太湖一线、宁镇扬盐沿长江一线和滨海沿线为轴带集聚分布;（3）各地市未来可承载国土开发强度呈现地域性、时间性和结构性差异,苏南地区主要面临环境和碳排放的双重约束,苏中和苏北则受水、环境和碳排放的交替约束。国土开发强度承载水平预测可为制定区域差异化的用地规模调控与生态保护政策提供理论与数据支撑。     

Temporal and Spatial Variations of Phytoplankton Community Structure in Lake Erhai,a Chinese Plateau Lake,with Reference to Environmental Factors

Russian Journal of Ecology - Temporal and spatial variations of phytoplankton community in Lake Erhai were investigated from May 2010 to April 2011. A total of 124 species belonging to 8 phyla and...     

热解含油污泥制备吸附材料浅析

介绍了含油污泥热解技术及热解实验方法,提出热解产生的残渣进行适当处理可成为具有吸附性的材料。进行了含油污泥热解正交实验,得出影响最大的因素分别是热解温度、热解时间、升温速率,并得出最佳的热解温度、热解时间、升温速率等。分析了含油污泥热解的机理,探讨了热解含油污泥制备吸附材料的活化改性,并在此基础上对所制备吸附材料的脱硫性和除油性进行了研究。     

羟胺强化Fenton反应降解水中氯酚

针对传统Fenton体系Fe（Ⅲ）累积和pH适用范围过窄等缺点,采用羟胺（HA）强化的HA-Fenton体系,以对氯苯酚（4-CP）为目标污染物进行降解实验,考察了Fe（Ⅱ）投加量、H2O2投加量、HA投加量和溶液pH等工艺条件对4-CP去除率的影响。实验结果表明：HA-Fenton体系适用于酸性和弱酸性条件,最佳pH范围为3.0~4.0;在溶液pH为3.0、Fe（Ⅱ）投加量为5.0 μmol/L、H2O2投加量为0.4 mmol/L、HA投加量为0.20 mmol/L的最适条件下,反应10 min, 4-CP去除率达64.25 %。     

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO₂ evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu²⁺ could decrease the degradation percentage and the enzyme inhibition effect of Cu²⁺ was not the linear effect, but the “low-dosage effect”.     

Sustainable Use of Coffee Husks For Reinforcing Polyethylene Composites

The utilization of the coffee husk fiber (CHF) from the coffee industry as a reinforcing filler in the preparation of a cost-effective thermoplastic based composite was explored in this study. The chemical composition and thermal properties of the CHF were investigated and compared with those of wood fiber (WF). CHF proved to be mainly composed of cellulose, hemicellulose and lignin, and exhibited similar thermal behavior to WF. High density polyethylene (HDPE) composites with CHF loadings of from 40 to 70% were prepared using melt processing and extrusion. The processing properties, mechanical behavior, water absorption and thermal performance of these composites were investigated. The effect of maleated polyethylene (MAPE) used as a coupling agent on the composite was explored. The experimental results showed that increasing the CHF loading in the HDPE matrix resulted in an increase in the modulus and thermal properties of the composites, but resulted in poor water resistance. The addition of a 4% MAPE significantly improved the interfacial behavior of the hydrophilic lignocellulosic fiber and the hydrophobic polymer matrix.