纳米技术在环境保护中的应用

介绍了纳米技术在环境保护领域中的应用现状、存在问题和今后的研究方向。纳米光催化剂、纳米过滤技术和纳米级的水处理剂在水处理中有着广泛的应用;纳米级的汽车尾气净化催化剂和其它纳米催化剂在大气污染控制方面有着普通材料无法比拟的优势;纳米技术在噪声污染控制和环境监测等方面也有广泛的应用。但是,纳米技术同时也存在光催化时光利用率低、催化效率低、纳米功能材料工作条件要求高等问题。     

延平湖城区水环境石油类污染与控制

通过对延平湖城区水环境石油类污染的监测分析、评价，查找原因，并据此提出控制对策。     

Removal of high concentrated ammonia nitrogen from landfill leachate by landfilled waste layer

The landfill of municipal solid waste(MSW) could be regarded as denitrification reactor and involved in ammonia nitrogen biological removal process. In this research, the process was applied to municipal solid waste collected in Shanghai, China, which was characterized by high food waste content. The NH4^ removal efficiency in the system of SBR nitrifying reactor followed by fresh and matured landfilled waste layer in series was studied. In the nitrifying reactor, above 90% of NH4^ in leachate was oxidized to NO2^- and NO3^- . Then high concentrated NO2^- and NO3^- were removed in the way of denitrification process in fresh landfilled waste layer. At the same time, degradation of fresh landfilled waste was accelerated. Up to the day 120, 136.5 gC/(kg dry waste) and 17.9 gN/(kg dry waste) were converted from waste layer. It accounted for 50.15 % and 86.89 % of the total carbon and nitrogen content of preliminary fresh waste, which was 4.42 times and 5.17 times higher than that of reference column respectively. After filtering through matured landfilled waste, BOD5 concentration in leachate dropped to below 100 mg/L, which would not affect following nitrification adversely. Because the matured landfilled waste acted as a well methanogenic reactor, 23% of carbon produced accumulatively from fresh landfilled waste degradation was converted into CH4.     

我国热带地区胶—茶—鸡农林复合系统物质循环研究

以海南省文昌市典型的胶—茶—鸡农林复合模式为研究对象 ,以单作胶园、胶茶间作园为对照 ,采用定量研究与定性分析相结合的方法 ,研究其物质循环规律。结果表明 ,胶—茶—鸡农林复合系统的氮、磷输入、输出量最大 ,系统外物质投入率比另两系统明显减少 ,系统内养分循环量增加 ,因此 ,该系统具有较合理的物质循环结构。     

森林合理年伐量分析确定方法研究

森林合理年伐分析确定是年森林采伐限额编制的关键技术之一,也是森林经理学的重要内容之一。本文从森林永续利用理论出发,以消长比度、成熟林采伐度、龄级结构改善度、流量均衡度、需要满足度５个指标建立了分析确定的综合评价模型,提出了森林合理年伐量分析确定的精确化方法,从而有效地保证了结果的科学性和准确性。     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

电晕法处理易挥发性有机物(VOCs)的实验研究

叙述了电晕法处理易挥发性有机物（ＶＯＣｓ）的实验研究。从实验中得出ＶＯＣｓ去除率与电场强度和空管速度的关系。对比了有填料与无填料时线 管式反应器处理ＶＯＣｓ的效果     

一种特殊形状制件的成形工艺

对弹匣前口板这种特殊形状制件成形工艺进行了讨论,找到了一种具有较高材料利用率,较高生产效率及简便易行的成形方法.     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

哈尔滨市交通噪声监测与评价

本文结合哈尔滨市历年交通噪声的状况及变化趋势,探讨了其近几年交通噪声的状况,并对部分路段进行了实际监测.根据调查结果和实际监测结论,本文综合系统地分析了哈尔滨市交通噪声强度和主要影响因素的发展变化趋势,对哈尔滨市交通噪声进行了初步评价,提出了全市交通噪声控制对策.