人工湿地堵塞机理及防堵措施浅析及研究

人工湿地作为一种高效率、低投资、低运行费用、低能耗的污水处理技术,越来越受到世界各国的关注。随着人工湿地的不断推广与应用,堵塞是影响其应用和推广的主要因素之一。湿地发生堵塞后,基质的渗透系数会急剧下降,过水能力也随之降低,大量引入湿地系统的污水直接雍积在湿地表面,长期积水引发恶臭、导致蚊蝇滋生,恶化运行环境。本文通过对人工湿地运行过程中出现的填料堵塞机理与特点进行分析,归纳和总结了人工湿地堵塞的影响因素,提出了人工湿地堵塞相应的解决措施,提高人工湿地对污水的处理效果,以期能够为人工湿地的应用及推广提供参考。     

Removal and transformation of organic matters in domestic wastewater during lab-scale chemically enhanced primary treatment and a trickling filter treatment

To find a simple and economical way for treating the domestic wastewater in small counties and towns, a process combining chemically enhanced primary treatment and a trickling filter (CEPT-TF, representing the physical and biological effects) was constructed and operated in laboratory conditions. The characteristic behaviors of dissolved organic matter in raw wastewater and effluents were examined during steady-state operation. Experimental results showed that the process of CEPT and TF in series was beneficial for the removal of hydrophobic and hydrophilic organics. Specially, the hydrophobic and aromatic materials could be preferentially removed in the CEPT unit, and the hydrophilic fraction in the TF. Structural changes of the organic fractions during the operation of the different units were also characterized via spectrum analysis.     

光催化膜反应器的设计及其在水处理中的应用

作为一种新型的水处理装置,光催化膜反应器具有反应迅速、降解效率高、降解彻底、无二次污染等特点,在节水减排、微污染水处理、中水回用等方面具有重要的应用价值。总结目前国内外各种不同类型的光催化膜反应器的设计、特点及在水处理中的应用情况,并对其今后的发展提出建议。     

养殖废水新型处理技术中试

针对畜禽养殖污染废水传统处理方法效率不高、噪声较大等缺点进行改进,采用"水解酸化池-塔式膜生物反应器-悬浮澄清池"工艺进行处理,结果表明:COD、氨氮去除率分别为97.5%和91%,出水水质可达GB 18596—2001《畜禽养殖污染物排放标准》。     

巢湖流域水资源可持续性评价方法研究

水资源可持续性评价模型(WRSEM,Water Resource Sustainability Evaluation Model)能够定量地评价流域水资源的可持续性,是流域水资源管理的一个有效工具。本文为了科学地衡量巢湖流域水资源开发、利用和管理的可持续性,构建了巢湖流域水资源可持续性评价模型和评价指标体系。巢湖流域水资源可持续性评价指标体系由4个一级指标(经济效率、社会公平、环境保护和保障能力)和20个二级指标构成。最后根据相对权重综合计算得到流域水资源可持续性指数。评价结果表明了巢湖流域水资源可持续性的程度,同时研究结果为巢湖流域水资源管理及其相关政策制定提供了科学依据。     

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Wet scrubbing combined with ozone oxidation has become a promising technology for simultaneous removal of SO₂ and NO_x in exhaust gas. In this paper, a new 20-species, 76-step detailed kinetic mechanism was proposed between O₃ and NO_x. The concentration of N₂O₅ was measured using an in-situ IR spectrometer. The numerical evaluation results kept good pace with both the public experiment results and our experiment results. Key reaction parameters for the generation of NO₂ and N₂O₅ during the NO ozonation process were investigated by a numerical simulation method. The effect of temperature on producing NO₂ was found to be negligible. To produce NO₂, the optimal residence time was 1.25 sec and the molar ratio of O₃/NO about 1. For the generation of N₂O₅, the residence time should be about 8 sec while the temperature of the exhaust gas should be strictly controlled and the molar ratio of O₃/NO about 1.75. This study provided detailed investigations on the reaction parameters of ozonation of NO_x by a numerical simulation method, and the results obtained should be helpful for the design and optimization of ozone oxidation combined with the wet flue gas desulfurization methods (WFGD) method for the removal of NO_x.     

城市再生水景观利用水华识别和预警方法探讨

城市再生水景观回用的主要问题是水体富营养化导致水华的暴发。为了抑制藻类的大规模生长,需要提前采取预防措施,以便将有可能爆发水华的藻类及时杀死或除去。目前,人们已经对景观水体中常见藻类的生长规律做了深入的研究,发现水体中藻数量(藻密度)的多少与水体的pH值和DO值的变化有密切而相对稳定的关系。通过在线实时监控pH值和DO值,找到△pH、△DO与藻类生长之间的关系,并结合pH、DO、温度、正磷酸盐和总氮等指标,实现实时识别和预测水华爆发的目的。     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

应对大型油罐特大火灾的研究——LASTFIRE项目组简介

简要介绍了LASTFIRE项目组的成立背景、组织结构、研究领域、研究目的、研究思路、研究进展等内容,总结了该项目组近几年的研究成果,指出我国的相关企业或研究机构应积极参与这种国际研究组织,实现研究国外资源共享,共同提高大型储罐的安全技术和管理水平。     

Response of soil microorganisms to vegetational succession in Ziwuling Forest

This study investigates the changes in soil microbial populations as vegetational succession progress from abandoned farmland to climax forest in the Ziwuling Forest, which is located in the northern part of the Loess Plateau, China. Different organic C and total extractable N between the fumigated and non-fumigated soils were assumed to be released from soil microorganisms. Soil microbial C was calculated using Kec = 0.38 and microbial N was calculated using Ken = 0.45. The released P was converted to microbial biomass P using Kep = 0.40. Soil bacteria, fungi, and actinomycetes increased as the vegetational succession progressed. Microbial C was of the highest amount in farmland. Microbial C, N, and P generally increased from abandoned land to climax community. The results indicated significant (P < 0.05) diversities of soil microbial biomass under different vegetation. There was a significant correlation between microbial biomass and soil nutrients. Knowledge about soil microbial populations is important for forecasting vegetational succession and determining the ecological condition of the environment.