Effect of Environmental Regulation on High-quality Economic Development in China—An Empirical Analysis Based on Dynamic Spatial Durbin Model

Environmental Science and Pollution Research - In 2017, the 19th National Congress of the Communist Party of China put forward the concept of high-quality economic development, indicating that the...     

Groundwater geochemical signatures and implication for sustainable development in a typical endorheic watershed on Tibetan plateau

Environmental Science and Pollution Research - Groundwater resource is significantly important for sustainable development of the world, especially for arid endorheic watersheds. A total of 28...     

Exploring soil erosion trajectories and their divergent responses to driving factors: a model-based contrasting study in highly eroded mountain areas

Environmental Science and Pollution Research - Soil erosion threatens environmental sustainability worldwide. Exploring the trajectories of soil erosion and associated drivers is of great...     

3种内筒溢流型溶气罐结构改进设计方案的溶气性能对比分析

溶气罐是溶气释放式微气泡发生系统的关键设备,其中内筒溢流型溶气罐具有结构简单、成泡粒径小等优点.提出了3种内筒溢流型溶气罐的结构改进设计方案,并对其在不同操作参数下的溶气性能进行了对比分析.为克服通过测量释气量间接表征溶气量所带来的系统误差,建立了在线带压测量溶解氧的方法,并以空气在水中溶解量的变化率(即溶气效率)来直接表征溶气罐的溶气性能.结果表明:溶气效率随气液比和溶气压力的增大而增加,随液位比的升高而减小;在相同气液比、液位比及溶气压力下,气液切向进口加螺旋导叶片型溶气罐的溶气效率最高.采用响应曲面法对溶气性能相对最佳的内筒溢流型溶气罐的操作参数进行优化,预测最高溶气效率为72.43％时的最佳操作参数为:气液比为0.25,液位比为0.36,溶气压力为0.26 MPa.所得回归模型预测值与实测值的相对误差为0.87％,表明该模型可较好地分析和预测溶气罐的溶气性能.     

Ambient air pollution exposure during pregnancy and gestational diabetes mellitus in Shenyang,China: a prospective cohort study

Environmental Science and Pollution Research - The prevalence of gestational diabetes mellitus (GDM) is increasing worldwide. Reports of the association between air pollution exposure and GDM have...     

Pseudomonas sp. ZXY-1, a newly isolated and highly efficient atrazine-degrading bacterium, and optimization of biodegradation using response surface methodology

Atrazine, a widely used herbicide, is increasing the agricultural production effectively, while also causing great environmental concern. Efficient atrazine-degrading bacterium is necessary to removal atrazine rapidly to keep a safe environment. In the present study, a new atrazine-degrading strain ZXY-1, identified as Pseudomonas, was isolated. This new isolated strain has a strong ability to biodegrade atrazine with a high efficiency of 9.09 mg/L/hr.Temperature, p H, inoculum size and initial atrazine concentration were examined to further optimize the degradation of atrazine, and the synthetic effect of these factors were investigated by the response surface methodology. With a high quadratic polynomial mathematical model(R~2= 0.9821) being obtained, the highest biodegradation efficiency of 19.03 mg/L/hr was reached compared to previous reports under the optimal conditions(30.71°C, pH 7.14, 4.23%(V/V) inoculum size and 157.1 mg/L initial atrazine concentration).Overall, this study provided an efficient bacterium and approach that could be potentially useful for the bioremediation of wastewater containing atrazine.     

好氧MBBR处理含吲哚废水的工艺优化试验研究

为了处理制药企业废水中吲哚类有机污染物,采用好氧MBBR(移动床生物膜反应器)工艺对含吲哚废水进行了试验研究,通过考察HRT、曝气量、吲哚冲击负荷等工艺条件对吲哚、COD和NH_4~+-N等去除效果的影响,确定了好氧MBBR反应器的最佳工艺条件。实验结果表明,在HRT在6~18 h变化时,MBBR工艺对吲哚去除率在8 h以上时达到100%,COD去除率在8 h达到89.65%,而NH_4~+-N去除率在12 h达到最高。在曝气量为0.1~0.12 m L/min时,MBBR工艺对COD和NH_4~+-N去除率分别为88.88%~92.95%和65%~66.83%。进水吲哚浓度25~65 mg/L变化时,好氧MBBR对吲哚去除率保持在100%,而对COD和NH_4~+-N去除率也保持在80%和40%以上,表明好氧MBBR工艺在处理难降解有机污染物方面具有显著优势。     

不同主体功能定位的县域空间功能区划研究

文章通过判别分析法,尝试构建一套针对不同主体功能定位县通用的指标体系,以反映社会经济发展状况、生态环境保护重要性、国土空间开发支撑条件。通过在广西10个不同主体功能定位县的实践应用,将县域空间划分为城镇空间、农业空间和生态空间,重点开发区、农产品主产区、重点生态功能区的城镇空间分别小于30%、20%和10%,农产品主产区的农业空间和重点生态功能区的生态空间均大于50%。研究成果为全省范围推广县域空间功能区划提供了科学依据。     

基于LMDI方法的广东省生活能源消费影响因素分析

运用对数平均迪氏分解法(LMDI)构建广东省生活能源消费的因素分解模型,定量分析2000~2014年间能源结构、人口规模、居住面积和设备消费等因素的变化对生活能源消费的影响。研究发现,4种因素的累计效应均为正,而采用逐年效应角度观察,设备消费是生活能源消费增加的最大拉动因素,其次为居住面积。基于研究结果,提出降低居民生活能源消费的相关政策建议。     

浸没燃烧技术处理高浓度有机废水研究

针对现阶段高浓度有机废水处理困难的问题,提出了一种基于浸没燃烧技术的处理方法,设计制作了1台浸没燃烧装置,并开展了高浓度有机废水浸没燃烧实验研究,探究了过量空气系数、二次风量、燃烧温度等参数对燃烧尾气中CO、NOx排放的影响,以及浸没深度、燃烧温度对高浓度有机废水COD去除的影响。实验结果表明:该工艺对高浓度有机废水中的有机物去除效果明显,温度在900℃以上,浸没深度达到20 cm时,COD去除率可达90%以上。该方法可作为废水处理设备,与生物法等处理技术联用,应用前景广阔。